A bloke is parting out his crashed Ralliart up here and I've managed to get the strut tower brace and snorkel for 100 beer tickets. Hopefully get them tomorrow if the public holiday allows.
Is there anything else I should be looking at to get?
I'd love the bonnet but it's munted from the front end crash.
I'll have a look over it tomorrow for any nice shiny aftermarket bits.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Ralliart parts.
Moderators: Moderators, Senior Moderators
- lancerdarryl
- Lancer MASTER
- Posts: 1929
- Joined: Wed Jul 14, 2010 3:10 am
- Location: Newcastle NSW Australia
Re: Ralliart parts.
Rear spoiler it's the same as a VRX but it is a little taller than the base model one.
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"
"Don't back off until you hit something"
Re: Ralliart parts.
The front brake calipers are a nice upgrade and direct bolt up for the NA's
Will need RA rotor and pads, they are not too bad $$ wise
Depending on what interior you have there is a few bits around the Radio etc you could grab
If it has a dash mat or rear shelf mat , those will fit the NA
Will need RA rotor and pads, they are not too bad $$ wise
Depending on what interior you have there is a few bits around the Radio etc you could grab
If it has a dash mat or rear shelf mat , those will fit the NA
4G69 TB viewtopic.php?f=49&t=22125
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
Re: Ralliart parts.
Thanks mates , I'll look at those parts.
Re: Ralliart parts.
Get the gear knob if you've both got auto/manual, those are expensive online.
2011 VRX Sportback
Message me on Discord: Mars#0420
If in doubt, rev it out!
Message me on Discord: Mars#0420
If in doubt, rev it out!
Re: Ralliart parts.
Well good news and bad , got the brace for fifty bucks but snorkel was absent . Must have been lost in the prang.
Interior bits were well and truly neglected and not worth salvaging , even the wheel was completely ruined.
Mars , the knob was there but is a different beast to my CVT trans'.
I'll fit the brace on the weekend and add some pic's.
Interior bits were well and truly neglected and not worth salvaging , even the wheel was completely ruined.
Mars , the knob was there but is a different beast to my CVT trans'.
I'll fit the brace on the weekend and add some pic's.
Who is online
Users browsing this forum: No registered users and 81 guests