***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

VR or VRX Steering Wheel

Lancer Interior Modifications.

Moderators: Moderators, Senior Moderators

User avatar
krz
Alumni
Alumni
Posts: 445
Joined: Mon Jan 12, 2009 10:13 pm
Location: Sydney, NSW, Australia

Postby krz » Sun Aug 02, 2009 3:53 pm

If you're just after the audio system control you can just get it. ~$100..
ofey can hook you up.. mine is an es, and i just bought it. quick 5 min install.
Image

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sun Aug 02, 2009 3:54 pm

Yes it is compatible.

But if you are after the audio buttons, it is a 5 minute install job. I even wrote up a DIY guide! You can get the buttons through our club sponsors for about $100. PM "ofey" and ask him.

Here is the DIY I made: http://clubcj.net/viewtopic.php?t=1799

Also, welcome to the site! Post up an into in the intro section and pictures in member's rides!

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Sun Aug 02, 2009 6:11 pm

its an interesting question though.. can one with an ES put in the whole-shebang with flappy paddles etc....?

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sun Aug 02, 2009 6:33 pm

The flappy paddles are separate from the wheel. and I think it should be able to be put in. Not cheap however. you can buy all the bits off JapanParts.com

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Sun Aug 02, 2009 6:38 pm

ta for the info!

User avatar
PMR
Club Sponsor
Club Sponsor
Posts: 99
Joined: Fri Jun 05, 2009 11:57 am
Location: Melbourne, VIC, Australia

Postby PMR » Mon Aug 03, 2009 8:40 am

do you really need paddle shift ? you have a tiptronic mode on the gera selecter for that

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Mon Aug 03, 2009 5:16 pm

The more mods the merrier...!

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Mon Aug 03, 2009 5:22 pm

Mr Wannabe VRX up there ^^

Your sig says it all! You should've just bought a VRX!!!

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Aug 03, 2009 5:32 pm

I don't see the point. No matter what mods anyone puts into an ES or VR to bring it up to a level of a VRX, it's still the same car. Same Chassis, same model code.

I think if I had bought an ES, I would try to bring it up to a level of a VRX but with aftermarket parts, not Mitsubishi parts. It just defeats the purpose, should have bought a VRX instead since it'll be better value for money.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Mon Aug 03, 2009 5:40 pm

Geez, such a pessimist Ofey... I have only spent $1600 since it was a horrible little ES.. and yay, all of it was non-Mitsu (apart from the stuff you sent me)...

I promise my turbo will be aftermarket too..

This is only my day-to-day car, so i care not if it is not a VRX or Ralliart etc...

I have a Motorcycle worth more than a Ralliart (this is where I like to spend my money)...

But I get your point.

Tryg

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Wed Aug 12, 2009 10:19 pm

flappy pedals would be fun :D if I had spare $$ and no other mods I wanted I'd go for 'em
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Wed Aug 12, 2009 10:20 pm

Does the ES and VR at least have the + and - available via the transmission stick?

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Wed Aug 12, 2009 10:27 pm

Yes, they both have the same transmission...

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Wed Aug 12, 2009 10:28 pm

Yeah it does adrian.

Haha, something i knew and you didnt :P
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me


Return to “Interior”

Who is online

Users browsing this forum: No registered users and 24 guests