Hi guys, ater 3 and a half years I am moving on from my much loved ralliart lancer.
I have stuck with the hot hatch game though and bought a Megane RS 265.
I have a set of standard ralliart shocks and springs to give away to the first person to PM me and offer a bottle of wine they have only done 10-15kand are in perfect condition.
All the best to you all and thanks for all the advice I have had from CCJ.
Michael
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Farewell CJers
Moderators: Moderators, Senior Moderators
-
ralliartrobbo
- Lancer Newbie
- Posts: 30
- Joined: Thu Dec 17, 2009 5:21 pm
- Location: Canberra, Austtralia
-
Tarquin
- Lancer Legend
- Posts: 1015
- Joined: Wed Sep 03, 2008 8:54 am
- Location: BrisVegas, QLD, Australia
Never good seeing someone leave - Sounds like you enjoyed your RA Michael - 
Shocks will fit as they are same as in VR-X.
RA Springs though, will be too tall.... as it normally has to cater for the 4WD system....
If you going to use some lowering springs, you could use his low kms shocks as near new with new springs
I did this with Ken's old RA susp. and put into my VR with some King Springs. Replaced my OEM 110000km VR suspension with ~20k kms RA shocks with some new 30mm low springs
Shocks will fit as they are same as in VR-X.
RA Springs though, will be too tall.... as it normally has to cater for the 4WD system....
If you going to use some lowering springs, you could use his low kms shocks as near new with new springs
I did this with Ken's old RA susp. and put into my VR with some King Springs. Replaced my OEM 110000km VR suspension with ~20k kms RA shocks with some new 30mm low springs
Last edited by Tarquin on Thu Feb 21, 2013 10:05 pm, edited 1 time in total.
Return to “Australian Capital Territory”
Who is online
Users browsing this forum: No registered users and 1 guest