***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Ebay Footwell LED Kit

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

User avatar
nanagn
Lancer Learner
Lancer Learner
Posts: 7
Joined: Sat Dec 24, 2011 3:23 pm
Location: Australia

Ebay Footwell LED Kit

Postby nanagn » Thu Feb 09, 2012 4:53 pm

I am thinking of purchasing the set linked below and installing them into the footwells and under the front seats.

Has anyone bought anything similar?
I'm concerned about whether or not the lights are bright enough although I suppose with 6 strips I could install 2 in each footwell.

6pc LED light kit

User avatar
nanagn
Lancer Learner
Lancer Learner
Posts: 7
Joined: Sat Dec 24, 2011 3:23 pm
Location: Australia

Postby nanagn » Thu Feb 09, 2012 5:12 pm

Thanks for the link. I have actually pulled apart my centre console and figured out how to do it. The cheap quality of my centre console makes it very easy to take apart.

User avatar
noo$h
Lancer ES/EX
Lancer ES/EX
Posts: 168
Joined: Sat Apr 30, 2011 5:48 pm
Location: Gold Coast

Postby noo$h » Thu Feb 09, 2012 5:20 pm

i actually bought the 4 pc version of that kit and the LEDs started dieing after a month so i really wouldnt reccomend them at all. i now use them on the back of my tv for a green glow since thats the only color that works anymore :/.

i then purchased these http://www.ebay.com.au/itm/4pc-7-COLOUR ... 761wt_1253

and those have been working fine for the past couple of months, no issues yet

PUREVO
Lancer Learner
Lancer Learner
Posts: 14
Joined: Wed Feb 22, 2012 2:43 pm
Location: Melbourne

Postby PUREVO » Sun Apr 29, 2012 6:08 pm

would anyone know how to tap into the interior lights, so it only turns on when the doors are opened?

User avatar
Poves
Lancer Newbie
Lancer Newbie
Posts: 59
Joined: Sun Feb 12, 2012 3:09 pm
Location: Gold Coast, Australia

Postby Poves » Sun Apr 29, 2012 6:25 pm

You will need to buy a test light (if you don't have one). Locate the wires in the roof to the interior light and trace them under the dashboard. Test which wire has the power when the door is opened and looses power when the door is closed (this is the wire you tap into). Do Not Use Scotch Locks. Either solder or use correct electrical terminals.

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sun Apr 29, 2012 6:48 pm

It is easier to splice into the wires by the fuse box behind the glove box.


Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 24 guests