***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

LED SMD replacements for interior lights

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Sat Mar 12, 2011 12:11 pm

Hoges wrote:Just put a better photo up.
Only takes 5 minutes to do. Just need red spade crimp lugs, and strong double sided tape
ok thankyou ryan

User avatar
JaZira5
Lancer VR/GT
Lancer VR/GT
Posts: 213
Joined: Sat Mar 12, 2011 3:03 am
Location: Hawthorne, Queensland, Australia

Postby JaZira5 » Sat May 21, 2011 2:14 pm

Ended up buying a 31mm for both the centre and boot lights. Got from ebay a 12 SMD LED White Dome light for both. It definetly needs minor fiddling to fit inside the holders, but it will fit.

In terms of visibility or light output for the boot, its bright and fully lights up my boot. And in terms of inside the car better than the OEM orange colour. Found it pleasing and easy mod. Thanks for the idea ^_^
Last edited by JaZira5 on Sun May 22, 2011 3:12 am, edited 1 time in total.

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Sat May 21, 2011 3:11 pm

These are the LEDS i have so people can see for ideas

Front Map Lights
Image

Center Dome Light
Image

User avatar
dannyboi
Lancer Evolution
Lancer Evolution
Posts: 818
Joined: Sat Jun 26, 2010 8:53 pm
Location: Sydney, Australia

Postby dannyboi » Sat May 21, 2011 3:16 pm

So far, so good with my interior LEDs. My map lights are a bit bluer than my dome light, but overall they work quite well.

kakar0t
Lancer ES/EX
Lancer ES/EX
Posts: 113
Joined: Fri Jan 28, 2011 10:12 pm
Location: Melbourne, AUstralia

Postby kakar0t » Mon Dec 26, 2011 9:24 pm

Hey guys, can you guys recommend me some replacement leds for the map lights and the dome lights? Are there any other lights that I should look to replace with LEDS? Should I go for blue (for the awesomeness) or white? Thanks

kakar0t
Lancer ES/EX
Lancer ES/EX
Posts: 113
Joined: Fri Jan 28, 2011 10:12 pm
Location: Melbourne, AUstralia

Postby kakar0t » Tue Dec 27, 2011 4:35 pm

Thanks heaps man, I have a couple of more questions.

People are talking about installing a LCD strip into their boot, is this an easy install? And is it possible to change the light which lights up the number plate to another colour such as blue?

User avatar
T-All3NT
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 301
Joined: Wed Dec 21, 2011 8:51 pm
Location: Canberra, Australia

Postby T-All3NT » Tue Dec 27, 2011 8:05 pm

I got a 16w blue led dome light bulb, and its been working fine for a few months now, only problem it was too big for the casing and the plastic melted while i was soldering


Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 33 guests