***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
GAS STRUT - HOOD LIFTERS
Moderators: Moderators, Senior Moderators
delta_fragma wrote:Got mine from Rainbow Pen. Pic here: http://i.imgur.com/Q6aCwD1.jpg
Are those easy to install? And how much did Rainbow pen charge you for them?
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Finally Bodykits Kingdom in Brisbane has relisted them on eBay for $99 with free shipping but you can also pick them up from their Coopers Plains shop.
http://www.ebay.com.au/itm/141682328698 ... EBIDX%3AIT
They also have a website
http://www.bodykitskingdom.com.au
Will now have to wait until next month to get them, hope they don't sell out.
http://www.ebay.com.au/itm/141682328698 ... EBIDX%3AIT
They also have a website
http://www.bodykitskingdom.com.au
Will now have to wait until next month to get them, hope they don't sell out.
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Okay got mine today, and just installed them.
Look and work great but there was a couple of minor problems.
First you need to undo both bonnet bolts which throws the alignment out, remember with the coupe it only had one bolt point there so it wasn't an issue. But I got them fitted and aligned pretty good for now.
Second issue was the lower hole is too big IMO and could lead to damage if it pulls through with wear and tear so I added a washer on the under side which didn't come with the struts.
Over all well worth it for the cool factor of self lifting the bonnet, but in the unlikely event the fail the old bar/strut is still in place. Still annoyed Mitsy doesn't include gas struts as standard on more cars, it would cost them next to nothing to do it in the factory. I remember my parents having an old Torana with a spring loaded system some 30 years ago like many cars of the day even my 76 Celica has a bonnet designed to be vertical when up with a tiny brace in the corner to stop it falling down.
If they found time to design the sedans boot to have gas struts, not to mention the sports hatch like all hatch backs but not the bonnet for less than $100 retail?
Oh and BTW I went for the $99 ones in Brisy on eBay.
http://www.ebay.com.au/itm/141682328698 ... EBIDX%3AIT
Look and work great but there was a couple of minor problems.
First you need to undo both bonnet bolts which throws the alignment out, remember with the coupe it only had one bolt point there so it wasn't an issue. But I got them fitted and aligned pretty good for now.
Second issue was the lower hole is too big IMO and could lead to damage if it pulls through with wear and tear so I added a washer on the under side which didn't come with the struts.
Over all well worth it for the cool factor of self lifting the bonnet, but in the unlikely event the fail the old bar/strut is still in place. Still annoyed Mitsy doesn't include gas struts as standard on more cars, it would cost them next to nothing to do it in the factory. I remember my parents having an old Torana with a spring loaded system some 30 years ago like many cars of the day even my 76 Celica has a bonnet designed to be vertical when up with a tiny brace in the corner to stop it falling down.
If they found time to design the sedans boot to have gas struts, not to mention the sports hatch like all hatch backs but not the bonnet for less than $100 retail?
Oh and BTW I went for the $99 ones in Brisy on eBay.
http://www.ebay.com.au/itm/141682328698 ... EBIDX%3AIT
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Who is online
Users browsing this forum: No registered users and 20 guests