***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

*CLOSED* Body Kit (V&C F-Lip + Evo Bump/Fender) Group

For all ClubCJ Members.

Moderator: Senior Moderators

qudans
Lancer VR/GT
Lancer VR/GT
Posts: 218
Joined: Sat Nov 15, 2008 3:47 pm
Location: Melbourne, VIC, Australia

Postby qudans » Tue Apr 14, 2009 6:53 pm

"Installation of the Front Bumper Under V-Lip is by mounting screws professional installer is Recommended ."

From the dudes listing on Ebay. Maybe someone else can give you a more detailed explanation.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Tue Apr 14, 2009 7:00 pm

Josh_Emerton wrote:I'm interested to know how the centre lip fits on, like where are the left/right extreme's of the lip and how does it attach, how secure etc


I believe Josh is referring only to the center lip.
The part is shown here:
Image

So you can see from the pic, the ends are where the front air dams are. For both the full lip and the center lip, you will need the front air dams.

From my email with VOX Motorsports:
2 screws to be drilled in from the bottom of your car. instructions provided.


As for secure, I think they won't rattle considering that they'll be clipped tight on the top and screwed in on the bottom. Too secure is a problem also as if you go over a hump and scratch it, the scratch may pull on it and rip out your front grill. So I think abit of lag has to be given for it to shift.

I've never had the part so I won't know till I get the V-Lip.
After ripping out the whole interior for my car to install sound deadening, installing Shadow's auto fold mirrors, and doing a couple of front vinyls for people, I don't think so much about installs these days. I just do them.

qudans
Lancer VR/GT
Lancer VR/GT
Posts: 218
Joined: Sat Nov 15, 2008 3:47 pm
Location: Melbourne, VIC, Australia

Postby qudans » Tue Apr 14, 2009 7:10 pm

Hopefully its flexible, my front air dams are aftermarket (from shadows), and I don't want there to be any fitment issues or gaps... that would probably be bad. Although I haven't installed my air dam's yet (too busy).. mb i should just wait till this lip comes in and line em up.

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Tue Apr 14, 2009 8:36 pm

So this is (a)http://www.newpages2u.com/products.php?id=5679&lang=&cat=MITSUBISHI%20LANCER%2008

And (b) is http://www.newpages2u.com/products.php? ... ANCER%2008.

If thats correct I'lltake an A
Image

[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

User avatar
leevin
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 361
Joined: Sun Feb 08, 2009 10:48 pm
Location: Melbourne, VIC, Australia

Postby leevin » Wed Apr 15, 2009 10:41 am

cmon guys! dont lash now! once only offer!
07 CJ VRX BLACK LANCER

User avatar
criteek
INACTIVE Member Account
Posts: 125
Joined: Thu Apr 09, 2009 2:12 pm
Location: Bittern, VIC, Australia

Postby criteek » Wed Apr 15, 2009 1:40 pm

So it's $240 for the under bumper lip? If so count me in (another vic member), I can make a deposit if needed

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Apr 15, 2009 1:48 pm

criteek wrote:So it's $240 for the under bumper lip? If so count me in (another vic member), I can make a deposit if needed

YES for the lip only. Shipping needs to be worked out now but it shouldn't take the price too high since we're grouping it.

qudans
Lancer VR/GT
Lancer VR/GT
Posts: 218
Joined: Sat Nov 15, 2008 3:47 pm
Location: Melbourne, VIC, Australia

Postby qudans » Wed Apr 15, 2009 2:03 pm

Comon Guys, where are all the fellas from outside vic!

User avatar
ANDROS
Lancer Legend
Lancer Legend
Posts: 1031
Joined: Wed Mar 18, 2009 8:41 am
Location: Melbourne, VIC, Australia

Postby ANDROS » Wed Apr 15, 2009 2:04 pm

sorry guys, bit too pricey for me.
___________________________________________________

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Apr 15, 2009 4:10 pm

ANDROS wrote:sorry guys, bit too pricey for me.


Don't worry about it. I feel sorry that I can't bring down the price further.

User avatar
b3n87
Lancer VR/GT
Lancer VR/GT
Posts: 238
Joined: Sun Jan 25, 2009 1:33 pm
Location: Melbourne, VIC, Australia

Postby b3n87 » Wed Apr 15, 2009 5:50 pm

can i pay you by bank internet mah-jiggy?

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Apr 15, 2009 6:41 pm

That's the only way I'm going to accept payment actually so it's ALL Recorded. No additional charges. If you do paypal, there's a commission so no no for me.

By this, you won't worry about not having a receipt.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
Ozie
INACTIVE Member Account
Posts: 5445
Joined: Mon Sep 22, 2008 7:00 am
Location: Sydney, NSW, Australia

Postby Ozie » Thu Apr 16, 2009 9:24 am

* The Bandit mentioned about an Evo X Centre piece for the middle part of the bumper...any news on that because i want it too.

dumb&

Postby dumb& » Thu Apr 16, 2009 9:28 am

Ozie I'd imagine that would just be the centre lip bit - it would make the front resemble the evo-x front bar by filling the area between the airdams.

Image

User avatar
Ozie
INACTIVE Member Account
Posts: 5445
Joined: Mon Sep 22, 2008 7:00 am
Location: Sydney, NSW, Australia

Postby Ozie » Thu Apr 16, 2009 9:36 am

nar mate the part in the middle with the 2 vent openings in the bumper.

Image


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 12 guests