***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

What did you do on your car today?

Start a Topic! Have Your Say & Talk About Anything.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
Damir
Lancer Ralliart
Lancer Ralliart
Posts: 589
Joined: Tue Apr 02, 2013 6:56 am
Location: Melbourne, Australia

Postby Damir » Fri May 03, 2013 1:05 am

I finally got around to my interior LEDs, next step, underglows :D
Already mounted the switch and wire so the cable is working, just have to draw a diagram and fit the underglow leds in now. Also and additional boot LED was mounted for a more custom effect.

Image
Image
Image
User avatar
bunnishiwa
Lancer Legend
Lancer Legend
Posts: 1284
Joined: Thu Dec 24, 2009 4:22 pm
Location: Rye, Melbourne

Postby bunnishiwa » Fri May 03, 2013 7:54 am

Been getting back into logging and tuning over the last week. Managed to lean out the fuel slightly, and then advance the timing slightly, particularly through the spool up. Also backed off the aggressiveness of the ramp up rate and OMG it’s like driving a new car – very very smooth during normal driving, and the power curve when spooling feels more ‘certain’ 8)

Last night I began tuning the boost (target boost & WGDC), and have managed to get rid of my biggest bug bear. For those who log their RA’s will know that the boost can peak (say at 22ps), then dip a little (to around 20.5psi on mine) before peaking up again to 22psi before tailing off as the revs peak.

Several WOT logs this morning show – NO DIP.... :D

Very happy, not only because of this but also because I understand how I did it :D :D

Now just have to teach myself how to bring the spool up backa few hundred rpm :?
- Self tuned - work in progress - tune revision #16_03
- GS 3 port controlled wooooot :)
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar



Noli Timere Messorem
User avatar
BlueWRX
Lancer Legend
Lancer Legend
Posts: 1010
Joined: Fri May 29, 2009 11:42 am
Location: Sydney

Postby BlueWRX » Fri May 03, 2013 11:40 am

From a ClubCJ Member :P
User avatar
Syke
Lancer VR/GT
Lancer VR/GT
Posts: 291
Joined: Mon Jun 11, 2012 10:24 am
Location: Toowoomba, Australia

Postby Syke » Fri May 03, 2013 11:53 am

those interior LED's look amazing. How hard were they to wire up?

Im going to look into doing mine but red :)
Syke
One step closer to owning an Evo

Google Is Your Friend! Learn to embrace it...
Check Out My Garage
http://clubcj.net/garage.php?mode=view_vehicle&CID=1054
User avatar
BlueWRX
Lancer Legend
Lancer Legend
Posts: 1010
Joined: Fri May 29, 2009 11:42 am
Location: Sydney

Postby BlueWRX » Fri May 03, 2013 12:29 pm

TrojanHorse wrote:[quote:bf70f4b1ce=BlueVRX]From a ClubCJ Member :P[/quote:bf70f4b1ce] Lucky! Is it genuine then?


Yup came off MiztaB's car it was Black then i painted it blue
User avatar
RyanMK
Lancer Legend
Lancer Legend
Posts: 1115
Joined: Mon Apr 26, 2010 6:15 pm
Location: Adelaide

Postby RyanMK » Fri May 03, 2013 12:36 pm

TrojanHorse wrote:[quote:bf70f4b1ce=BlueVRX]From a ClubCJ Member :P[/quote:bf70f4b1ce] Lucky! Is it genuine then?


That's a genuine one off an evoX.
VG/Ultra Racing/Whiteline/Work/Ralliart/Supercircuit/Cosworth/Pioneer/BC/Recaro
User avatar
JustinR
Site Admin
Site Admin
Posts: 1954
Joined: Sat Jan 22, 2011 6:26 pm
Location: Sutherland Shire, Sydney

Postby JustinR » Fri May 03, 2013 1:30 pm

Stacy - about time you washed it! Haha

Look good but.
User avatar
BlueWRX
Lancer Legend
Lancer Legend
Posts: 1010
Joined: Fri May 29, 2009 11:42 am
Location: Sydney

Postby BlueWRX » Fri May 03, 2013 1:33 pm

After being parked next to your car i felt i had too lol Plus the bonnet had just been painted so now the car is all one colour :P
User avatar
SIX
Post Monster
Post Monster
Posts: 3251
Joined: Fri Nov 16, 2012 9:44 pm
Location: Northern Adelaide

Postby SIX » Fri May 03, 2013 1:47 pm

Hate u Stacey in the nicest possible way !!!! Looks sweet as
1998 MR lancer
2009 CJ lancer sportback
2011 Renault Sport RS250 Trophee Cup
2000 Tommi Makenin Evolution 6.5
User avatar
Mitsi
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 458
Joined: Wed Sep 22, 2010 12:16 pm
Location: Brisbane, Australia

Postby Mitsi » Fri May 03, 2013 2:26 pm

New rims :)

Image
2010 Lancer Ralliart <3
User avatar
Damir
Lancer Ralliart
Lancer Ralliart
Posts: 589
Joined: Tue Apr 02, 2013 6:56 am
Location: Melbourne, Australia

Postby Damir » Fri May 03, 2013 6:07 pm

Syke wrote:those interior LEDs look amazing. How hard were they to wire up? Im going to look into doing mine but red :)

The neons themselves are relatively easy to wire up, me and my mate just used an existing 12v source, we think it was the traction control or something so they run off a fuse as well.
But the most common method is just wire to the battery and feed through a grommet in the firewall
My Build Thread : http://clubcj.net/viewtopic.php?t=14731
ROTM Winner OCTOBER 2015 (Nominated for favourite CJ)
-Australia's first airbagged CJ-
Post Reply

Return to “General Talk”

Who is online

Users browsing this forum: No registered users and 30 guests