***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

What did you do on your car today?

Start a Topic! Have Your Say & Talk About Anything.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
RedFive
Lancer ES/EX
Lancer ES/EX
Posts: 128
Joined: Sat Oct 08, 2011 8:41 pm
Location: Melbourne, VIC

Postby RedFive » Thu Jan 31, 2013 6:08 pm

Just Hit 10,000km today. Took just over a year.
5,000km more till service...
User avatar
SIX
Post Monster
Post Monster
Posts: 3251
Joined: Fri Nov 16, 2012 9:44 pm
Location: Northern Adelaide

Postby SIX » Thu Jan 31, 2013 9:31 pm

RedFive wrote:Just Hit 10,000km today. Took just over a year. 5,000km more till service...


10,000 kms only in one year , id do that in 2 months lol :P
1998 MR lancer
2009 CJ lancer sportback
2011 Renault Sport RS250 Trophee Cup
2000 Tommi Makenin Evolution 6.5
User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Postby lancerdarryl » Fri Feb 01, 2013 1:35 am

RedFive wrote:Just Hit 10,000km today. Took just over a year. 5,000km more till service...

You need to service by time if you are doing less than 15.000 klm per year
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"
User avatar
RedFive
Lancer ES/EX
Lancer ES/EX
Posts: 128
Joined: Sat Oct 08, 2011 8:41 pm
Location: Melbourne, VIC

Postby RedFive » Fri Feb 01, 2013 9:54 am

lancerdarryl wrote: You need to service by time if you are doing less than 15.000 klm per year


Yea the mitsu service guys put a sicker on my windscreen saying to take it in at the end of feb, so that what I'm gonna do.
User avatar
ScootaX
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 335
Joined: Sun Nov 25, 2012 10:24 pm
Location: Gold Coast

Postby ScootaX » Fri Feb 01, 2013 10:11 am

DETAILED MY CAR! for tonight's meet. Pitty it'll be dirty by this time tomorrow
User avatar
tencents
Lancer Ralliart
Lancer Ralliart
Posts: 587
Joined: Wed Aug 17, 2011 6:26 pm
Location: Sydney, Australia

Postby tencents » Fri Feb 01, 2013 6:03 pm

Black_Art wrote:Fitted evo x front struts and springs in the ralliart which lowered it a bit and hopefully improves the ride over the stock units now i just need to figure out some kind of set ip to make the rear match


any pics?
- GST basemap
- AMS boostpill
- Works High flow drop in air filter
- Evo X BPV
- UR UICP
Image
User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Postby lancerdarryl » Sat Feb 02, 2013 12:31 pm

Replace the OEM bonnet vent with the Rexspeed vent I kept when I traded the RA. Don't know if I will leave it on it isn't the neatest fit.......
Image
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR

"Don't back off until you hit something"
User avatar
Kimmy
Lancer MASTER
Lancer MASTER
Posts: 2410
Joined: Sun May 16, 2010 4:21 pm
Location: Brisbane

Postby Kimmy » Sat Feb 02, 2013 1:06 pm

Had my rear guards rolled today. They were scrubbing a little after I bought new tyres.
(cj-grey)Ride of the Month April 2011
Image
My ride thread: Click here!
My garage: Click here!
User avatar
timmo91
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 436
Joined: Wed Nov 23, 2011 9:55 pm
Location: Queanbeyan, Australia

Postby timmo91 » Sat Feb 02, 2013 4:27 pm

Looks great Rakesh, well done :D
User avatar
vermilioN
Lancer Ralliart
Lancer Ralliart
Posts: 632
Joined: Sat Jun 16, 2012 1:06 pm
Location: Adelaide

Postby vermilioN » Sat Feb 02, 2013 4:56 pm

Carbon wrap looks awesome.
Image

Australia's sexiest blacked out ralliart ;)

evo x turbo, ets intercooler, turbosmart wga, aem intake, ur intercooler piping, ur turbo back exhaust, 3port
User avatar
scraverX
Lancer MASTER
Lancer MASTER
Posts: 1590
Joined: Fri Oct 30, 2009 8:12 am
Location: Canberra, Australia
Contact:
Contact scraverX

Postby scraverX » Sat Feb 02, 2013 8:00 pm

Purchased a new Amplifier PRS-D800; not because the one I have is broken or anything, but because I need MOAR channels.
Also got some cable and other stuff I'll need to install it.

Then I pulled out the old crossovers (don't use them now) and the mount place will be used for the new amp as a temporary measure until I spend the time and money to get more amps and do a whole new layout.

Then I took some time to figure a few things out and finally just out of interest mainly, did some advance planning.

One reason I picked these amps is the size. (200mm x 100mm roughly)

Image

Three will fit nicely with space to spare for connections.
"Max" 2009 MY10 RX, Black. CCJ Lifetime Premium Member #0125
Car & Home audio nut.
Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS
Home Audio: Denon, Epos, Pro`ject, AKG
Post Reply

Return to “General Talk”

Who is online

Users browsing this forum: Google [Bot] and 167 guests