***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

CF gauge pods

Car Images, Wallpapers/High Res, Photography Skills & Idea's.

Moderators: Moderators, Senior Moderators

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Mon Mar 08, 2010 4:57 pm

I do believe that I said I have emailed them and if they were interested I would add it to the poll.

So, the group buy will not be in this thread, and my comment should have been the end of that.

Back on topic now please....

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Mon Mar 08, 2010 6:14 pm

Blakey,
thanks for the thoughts.. but this is not an EOI or GB thread... let them talk about their options..

This is not for everyone, it is pricey, but I bought the 60mm in for $280AUD the CF pod for $70AUD... not the RRP of $425AUD and $140AUD as most assume.

Image

bd-850
Alumni
Alumni
Posts: 4486
Joined: Sat Apr 25, 2009 6:37 pm

Postby bd-850 » Mon Mar 08, 2010 6:27 pm

looks good, but i would prefere if the pod was same colour as the pillar.

But still looks good

User avatar
PYLee
Lancer MASTER
Lancer MASTER
Posts: 1808
Joined: Wed Aug 05, 2009 1:29 am
Location: Melbourne, VIC

Postby PYLee » Mon Mar 08, 2010 6:29 pm

$70 AUD for the CF pod is pretty decent , considering rexpeed's pretty cheap and their at $139 delivered

where is it made ?
Lancer Evolution 10MR

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Mon Mar 08, 2010 6:36 pm

Same factory as Rexpeed ;)

User avatar
draevon
Lancer Ralliart
Lancer Ralliart
Posts: 689
Joined: Fri Oct 23, 2009 9:09 am
Location: Brisbane
Contact:

Postby draevon » Mon Mar 08, 2010 6:40 pm

Looks good Tryg.
.
Image
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Mon Mar 08, 2010 7:10 pm

SIR-VRX wrote:Same factory as Rexpeed ;)


Well, same precinct in Taiwan, not a Rexpeed obviously... for legal reasons...

The CF producing factory makes for many retailers...

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Mon Mar 08, 2010 8:11 pm

Video[/url]

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Mon Mar 08, 2010 10:43 pm

dam if only i had the money to buy one i would, looks good tryg. its very aesthetically pleasing.
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Mon Mar 08, 2010 11:29 pm

I think people are correct that it is a big colour difference.. I talked to the manufacturer, he also makes whole A-pillar CF covers..

Might grab a sample set to try...

Sickbunny
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 391
Joined: Sun Oct 04, 2009 11:29 am

Postby Sickbunny » Mon Mar 08, 2010 11:30 pm

i think the full a pillar ones would be good if they also made a matching cover for the left side, otherwise i dont think it would match too well.

i really like the shorter one you have in that pic.

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Tue Mar 09, 2010 12:34 am

yes, they make two, one for each side, they also make rear C-pillar and also B-pillar.. depends on how much moola you can throw at an ES (in my case).. I have maxed out my insurable limit ($30K) so now all the mods will probably be uninsurable...

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Tue Mar 09, 2010 7:09 am

how have you maxed 30K of insurance? how did you get a insurance company to insure your car for 30grand?
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM

Sickbunny
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 391
Joined: Sun Oct 04, 2009 11:29 am

Postby Sickbunny » Tue Mar 09, 2010 8:55 am

Mines insured for $28,000 at the moment and it's an es :)

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Tue Mar 09, 2010 9:19 am

My O.Ed. is insured for A$32,000.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors


Return to “Image Gallery”

Who is online

Users browsing this forum: No registered users and 44 guests