***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Tadz is in Disbelief...Broken CJ ='(
Moderators: Moderators, Senior Moderators
- driftnut((
- Lancer Evolution
- Posts: 950
- Joined: Sun Oct 11, 2009 12:05 pm
- Location: central coast Australia
it's all good mate i just hope that if something like this happened to me that i would get the same treatment, hope everything works out 4 u
driftnut((.. ClubCJ's first RX TURBO, Merlinised, K&N pod 18" KING wheels, BC coil overs, Alpine/Pioneer system, Short shifter, Cat back system, Evo x turbo system, ralliart injectors & pump
- tadz0rz
- Genius
- Posts: 6955
- Joined: Sun Mar 08, 2009 8:54 pm
- Location: Melbourne, VIC, Australia
- Contact:
Might as well ask it here since everyone knows lol...
Since im hopefully getting the RA rear bar, as all of you should know, its Dual Exhaust..
What should i do for a relativly cheap and effective solution...With the CJ's small engine im most likely going to loose power by adding the dual exhaust..
I dont think im going to go for anything racy or loud...Even if they can cut a hole in my stock exhaust, bend a pipe and stick it out the other side with a chrome tip ill be happy...But do you guys rekon i should go for a proper setup...I just dont want that drone while crusing down the freeway. If it sounds like a stock CJ i dont mind, long as though the affect is the same...
Would cutting and fabricating a second outlet on the stock exhaust work? positives and negatives from it??
Thanks guys
Since im hopefully getting the RA rear bar, as all of you should know, its Dual Exhaust..
What should i do for a relativly cheap and effective solution...With the CJ's small engine im most likely going to loose power by adding the dual exhaust..
I dont think im going to go for anything racy or loud...Even if they can cut a hole in my stock exhaust, bend a pipe and stick it out the other side with a chrome tip ill be happy...But do you guys rekon i should go for a proper setup...I just dont want that drone while crusing down the freeway. If it sounds like a stock CJ i dont mind, long as though the affect is the same...
Would cutting and fabricating a second outlet on the stock exhaust work? positives and negatives from it??
Thanks guys
- driftnut((
- Lancer Evolution
- Posts: 950
- Joined: Sun Oct 11, 2009 12:05 pm
- Location: central coast Australia
get a proper set up for as it will lose power if u cut and add other way is to get an RA muffler from ebay or from someone on here if they upgrade theres
driftnut((.. ClubCJ's first RX TURBO, Merlinised, K&N pod 18" KING wheels, BC coil overs, Alpine/Pioneer system, Short shifter, Cat back system, Evo x turbo system, ralliart injectors & pump
- tadz0rz
- Genius
- Posts: 6955
- Joined: Sun Mar 08, 2009 8:54 pm
- Location: Melbourne, VIC, Australia
- Contact:
But you see, i dont have too much money to spend. The exhaust itself is going to have to wait a few months after i get the car fixed so i can get some more money to it looks proper..
I mean, if i can get someone to fabricate a second outlet on my stock exhast for liek $100 and i can run around with that on for a few months untill i get a proper one whether it would be from RPW or custom id be happy..If i loose power for a few months i mean who cares, it would be like 5 hp and wouldnt really be noticeable.
Long as though theres no negative affects to the engine, ie damaging it i dont really care for the moment
I mean, if i can get someone to fabricate a second outlet on my stock exhast for liek $100 and i can run around with that on for a few months untill i get a proper one whether it would be from RPW or custom id be happy..If i loose power for a few months i mean who cares, it would be like 5 hp and wouldnt really be noticeable.
Long as though theres no negative affects to the engine, ie damaging it i dont really care for the moment
why do you have to change or modify your existing exhaust?? why can't you just install a fake tip on the otherside? you'd be looking at 40-50 bucks for a tip. that would be far cheaper then buying a new exhaust system or modifying an existing exhaust especially if its jsut for a few months until you decide what you want to do.
Born at JustJDM's 'ninjaworks' facility,
Honed into a weapon by Mercury Motorsport
Honed into a weapon by Mercury Motorsport
- scraverX
- Lancer MASTER
- Posts: 1590
- Joined: Fri Oct 30, 2009 8:12 am
- Location: Canberra, Australia
- Contact:
I'd just get a fake one for now, then save up for one of RPW's dual outlet setups. I saw a pic on their site the other day and it looks kinda neat.
Best of luck with everything dude.
Best of luck with everything dude.
"Max" 2009 MY10 RX, Black. CCJ Lifetime Premium Member #0125
Car & Home audio nut.
Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS
Home Audio: Denon, Epos, Pro`ject, AKG
Car & Home audio nut.
Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS
Home Audio: Denon, Epos, Pro`ject, AKG
- driftnut((
- Lancer Evolution
- Posts: 950
- Joined: Sun Oct 11, 2009 12:05 pm
- Location: central coast Australia
kmart tips are $25 thats where i got mine from when i had stock system and the look better than the mitsu ones
driftnut((.. ClubCJ's first RX TURBO, Merlinised, K&N pod 18" KING wheels, BC coil overs, Alpine/Pioneer system, Short shifter, Cat back system, Evo x turbo system, ralliart injectors & pump
- tadz0rz
- Genius
- Posts: 6955
- Joined: Sun Mar 08, 2009 8:54 pm
- Location: Melbourne, VIC, Australia
- Contact:
I think K-Mart is the way to go then. Gotta finish unpacking my room then im gunna head down to the smash repair place and ask a few questions on getting the RA rear bar..
What should i actually say to them?
"If i can get you the part number for the OEM rear bar that i want, would you guys be able to order it and install it under the insurance?, I can get you everything you need to organise it all you would have to do was place the order for it from your supplier"
That sound okay?
What should i actually say to them?
"If i can get you the part number for the OEM rear bar that i want, would you guys be able to order it and install it under the insurance?, I can get you everything you need to organise it all you would have to do was place the order for it from your supplier"
That sound okay?
Who is online
Users browsing this forum: No registered users and 5 guests