***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

GAS STRUT - HOOD LIFTERS

Lancer Interior Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Tin_Pusher
Lancer ES/EX
Lancer ES/EX
Posts: 186
Joined: Wed Sep 23, 2009 8:14 pm
Location: Woodend, Victoria

Postby Tin_Pusher » Fri Jan 01, 2010 6:38 pm

Count me in also guys ....... interested in the black bolt on/no rivets version.

fatwgn
INACTIVE Member Account
Posts: 27
Joined: Fri Sep 25, 2009 7:15 pm
Location: charlestown

Postby fatwgn » Sun Jan 03, 2010 11:17 pm

be very careful with these they bend the bonnets, have seen them on a couple already the bonnets are very thin and bend with the extra strain on them

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Mon Jan 04, 2010 12:33 am

Extra strain? They are quite neutral...

I would like to see a bent bonnet from a gas strut lift....

would be more pressure on a bonnet from wind flowing over it!

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Mon Jan 04, 2010 12:34 am

I had twin gas struts on my Daewoo Matiz (which is Korean for Tissue Paper) and that bonnet did not fail....

The Lancer bonnet is well braced IMHO.

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Mon Jan 04, 2010 12:36 am

tryg wrote:Extra strain? They are quite neutral...

I would like to see a bent bonnet from a gas strut lift....

would be more pressure on a bonnet from wind flowing over it!


Ignore it!
He was just getting his post up so he could sell his RA wheels.

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Mon Jan 04, 2010 2:26 pm

My ebay ones just got delivered, can't pick up from the post office until 4:30pm :( 1hr and 5 minutes to burn. :cry:
"the quieter you become, the more you are able to hear"
More pix @ http://clubcj.net/viewtopic.php?t=8779
ImageImage

User avatar
Panther4B11
INACTIVE Member Account
Posts: 342
Joined: Thu Dec 18, 2008 11:22 pm
Location: Brisbane, QLD, Australia

Postby Panther4B11 » Mon Jan 04, 2010 2:28 pm

I picked up some Struts R Us at the Gold Coast here in Queensland. Cost me $120 all up. Looks awesome.
Image

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Jan 04, 2010 2:43 pm

VRX-Pete: Let us know how it goes. I'm keen.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Mon Jan 04, 2010 3:56 pm

Panther4B11 wrote:I picked up some Struts R Us at the Gold Coast here in Queensland. Cost me $120 all up. Looks awesome.


Is that for one or two mate?

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Mon Jan 04, 2010 4:03 pm

ofey wrote:VRX-Pete: Let us know how it goes. I'm keen.

Just picked them up from the post office. Build seems good. The CF look is not some sticker stuck on (which I kinda feared), but luckly did not eventuate.
The metal feels very solid. Not flimsy. Each strut weighs in at 265g.
If you want the large original photo and instructions clicky here (big image warning)http://www.images.clubcj.net/results/20100103234722_DSC00483.JPG
Instructions (for the curious)
http://www.images.clubcj.net/results/20100103235849_DSC00485.JPG
http://www.images.clubcj.net/results/20100103235922_DSC00486.JPG

Image
"the quieter you become, the more you are able to hear"

More pix @ http://clubcj.net/viewtopic.php?t=8779

ImageImage

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Mon Jan 04, 2010 4:40 pm

Nice Panther... I would love to get down there and grab some, its a bit of a drive. Might do it when I see Adrian with the ECU reflash...

Chrome here I come!

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Tue Jan 05, 2010 8:07 am

Just installed mine, not sure if I placed the washer and the locking washer in the correct sequence. :?

Anyone want to confirm I've done it right or buggered it up? Have a feeling the locking washer should be against the head of the screw and the flat washer against the black plate? I'm such a n00b, especially after a nightshift. :)

Image
"the quieter you become, the more you are able to hear"

More pix @ http://clubcj.net/viewtopic.php?t=8779

ImageImage

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Tue Jan 05, 2010 9:35 am

Chubb wrote:
Panther4B11 wrote:I picked up some Struts R Us at the Gold Coast here in Queensland. Cost me $120 all up. Looks awesome.


Is that for one or two mate?


you get 2 for that price. Black struts, stainless brackets. Chrome struts extra.

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Tue Jan 05, 2010 10:34 am

Hey VRX_Pete, That looks just right to me. The locking Star washer looks to big in diameter to place under the head of the Hex Bolt. Leave as it is ! After 37yrs in Engineering, its the way I'd do it.

Cheers: Sam

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Tue Jan 05, 2010 5:00 pm

Thanks for that. Just was dreading have to re-do it all over again. :(
Not sure if both washers are really needed, I'd be inclinded to use the star lock washer only.
my concern is with the attachment to the hood, where adding the black plate in addition to two washers does not leave enough thread for the nut screwed on. There is only enough thread for half the nut to attach.
"the quieter you become, the more you are able to hear"

More pix @ http://clubcj.net/viewtopic.php?t=8779

ImageImage


Return to “Interior”

Who is online

Users browsing this forum: No registered users and 24 guests