***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
**CLOSED** The X-Factordesign.com Design Comp - final 5
Moderators: Moderators, Senior Moderators
OK, so yet again im no expert but i hope you can get the picture.
Idea LED tail lights for the Lancer Sportback.
Reason Tail lights is to replace the ugly standard tail lights on the Sportback
(on the side of the light is a reflector)
The background of the lights can be in either Black or Chrome.
I understand that to make the LED lights will cost a bit, but i beleive that everyone who owns a sportback will buy these lights therefore making your money back
i Beleive there is a need for my disign as the number one complaint about the Lancer Sportback is the Tail lights.
Idea LED tail lights for the Lancer Sportback.
Reason Tail lights is to replace the ugly standard tail lights on the Sportback
(on the side of the light is a reflector)
The background of the lights can be in either Black or Chrome.
I understand that to make the LED lights will cost a bit, but i beleive that everyone who owns a sportback will buy these lights therefore making your money back
i Beleive there is a need for my disign as the number one complaint about the Lancer Sportback is the Tail lights.
Last edited by bd-850 on Thu Dec 10, 2009 9:48 am, edited 2 times in total.
Krispy wrote:bd-850 wrote:Thanks Bandit
Good luck to the other losers opps i mean entries, lol
lol that looks like some trash talk well in response to that I'd mention that ALL lancers have front ends while only SOME require SB tail lights... Yeah think about it
but on that this comp isnt on who needs what, from what shadow has said its who has come up with the best idea and is a marketable product and why is it as good as you make out and ect.
- drake89
- Lancer VRX/GTS
- Posts: 478
- Joined: Tue Sep 08, 2009 4:21 pm
- Location: Gold Coast, Australia
- Contact:
Ok... after a few days of great panic I finally found someone that could help me with my 2nd draft.. my cousin. haha.
This is what we came up with. its still a lil rough around the edges (sharp pointy fins on my wing that in reality would be rounded/curved) but i lack the skills in 3D modeling and rendering. So this is thew best i could do!
Hopefully it will show the judges how it will look in relation to the rest of the car
The dual wing will add visual and aerodynamic performance to our cars. The horizontal wings still work as all other single wings do... Increase down force at the rear of the car.
The 2 longer center vertical fins provide structural support between the 2 wings and aid in directing air flow.
The last 2 smaller outer vertical fins work with the very top of the center fins to effectively act as a "Vortex Generator" but on the wing.
I hope this is what the judges are after and if not just ask me.
Thanks guys =)
-drake89
Images:
1
2
3
This is what we came up with. its still a lil rough around the edges (sharp pointy fins on my wing that in reality would be rounded/curved) but i lack the skills in 3D modeling and rendering. So this is thew best i could do!
Hopefully it will show the judges how it will look in relation to the rest of the car
The dual wing will add visual and aerodynamic performance to our cars. The horizontal wings still work as all other single wings do... Increase down force at the rear of the car.
The 2 longer center vertical fins provide structural support between the 2 wings and aid in directing air flow.
The last 2 smaller outer vertical fins work with the very top of the center fins to effectively act as a "Vortex Generator" but on the wing.
I hope this is what the judges are after and if not just ask me.
Thanks guys =)
-drake89
Images:
1
2
3
Last edited by drake89 on Thu Dec 10, 2009 7:07 am, edited 1 time in total.
why do the wheels of that evo have little spikes coming out of ithem lol.
did your cousin make the evo? if so hes pretty good, i tried making cars with a 3d progam i have but i just failed cant get them to look right.
that progam kinda looks like autocad or something close to it. maybe another maker not adobe
did your cousin make the evo? if so hes pretty good, i tried making cars with a 3d progam i have but i just failed cant get them to look right.
that progam kinda looks like autocad or something close to it. maybe another maker not adobe
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM
- Bandit
- Lancer Legend
- Posts: 1170
- Joined: Tue Dec 09, 2008 8:56 am
- Location: The People's Republic of Campbelltown
Blakey wrote:why do the wheels of that evo have little spikes coming out of ithem lol.
Maybe they are ice tyres....
That's a good pic drake89 - one comment though - i thought that the two centre fins touched the boot lid, although in the pictures it doesn't appear to - is that right??
ClubCJ's first Sportback
- drake89
- Lancer VRX/GTS
- Posts: 478
- Joined: Tue Sep 08, 2009 4:21 pm
- Location: Gold Coast, Australia
- Contact:
lol... yeah he made the evo and showed me some basic stuff so i could do the wing. he has a fascination about snow. lol
negitive... original design was the center fins attatched to the lower wing and dident protrude...
my cousin has been a graphic artist for about 10 years but has recently moved onto website design. he used to do graphics for Warhammer
negitive... original design was the center fins attatched to the lower wing and dident protrude...
my cousin has been a graphic artist for about 10 years but has recently moved onto website design. he used to do graphics for Warhammer
Last edited by drake89 on Wed Dec 09, 2009 3:55 pm, edited 1 time in total.
Blakey wrote:Krispy wrote:bd-850 wrote:Thanks Bandit
Good luck to the other losers opps i mean entries, lol
lol that looks like some trash talk well in response to that I'd mention that ALL lancers have front ends while only SOME require SB tail lights... Yeah think about it
but on that this comp isnt on who needs what, from what shadow has said its who has come up with the best idea and is a marketable product and why is it as good as you make out and ect.
Well I did post it up as a bit of a joke mate trying to lighten the mood and inject a little humor.
I do have some serious views on business and know a thing or two (hence my submission and product selection)... im not about to poo poo on your views, in fact to an extent I agree... Lets leave it at that and not start a little poo flinging contest
Who is online
Users browsing this forum: No registered users and 19 guests