springs arent too hard if u have a jack and a socket set, u may/may not need a rattle gun which can be hired, an electric one, bout $40 half day.
takes about 2 hours i guess.
youll need a wheel alignment after it imo.
tune and intake u can take ofeys advice.
u can talk to us sat. night at the photoshoot if u wish
Merlin is a member of this site who wrote the tuning guide which is extensively used by open source tuners.
You will need a couple of things to get your car tuned via Merlin.
1. Join as a premium member. Even if you don't, Merlin charges you A$40 more (which in truth is a premium membership). The cost of remote tuning is A$200 I think.
2. You will need to purchase a Tactrix Cable. That's also about A$200 delivered. This will allow you to log your car's performance when driving. It will also allow you to read your ROM and flash it back once Merlin tweaks it.
and
3. You will need to be willing to do power runs on the freeway. A power run is usually done in 3rd gear (in CVTs, you can also do this by switching to sports mode) and going wide open throttle on a flat straight stretch of road. This is done till the car sounds like it needs you to shift.
The Tactrix cable will log all your data and you send this file to Merlin thus the remote logging idea. He will then be able to tweak your ROM file to tune your car.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
the local repco and supercheap let me down good old autobarn had one left and yeah it was $120 but worth it cause i really wanted it today
Ofey ill have to get you to send me that RA snorkel, the local Mitsubishi dealer wanted nearly $190 and it was going to take almost 3 weeks to get it in!