***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Recommended Brake Fluid

Servicing, Oil Changes, Fluids & Much More.

Moderators: Moderators, Senior Moderators

User avatar
simo
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Wed Jul 22, 2009 9:45 pm
Location: Ulverstone, TAS, Australia

Recommended Brake Fluid

Postby simo » Fri Jan 15, 2010 8:17 pm

Hey Guys!

Been a bit of a while since I've posted up a question, just thought I'd throw another one out there.

My VRX is about 800km of it's 45,000Km service, I've noticed that the Brake Fluid is to be replaced on this rather large service.

Rather than Mitsu just putting there OEM stuff back in there, I was thinking I'd put something better in, ie with a higher boiling point. I'm planning on upgrading rotors and pad soon and I thought this would help aswell considering I will be taking my car on the track sometime in the next couple of months.

I was speaking to a mate and he suggested Penrite Sin Brake Fluid which seems to look ok....

http://www.penriteoil.com.au/products/specialty-automotive-products/sin_brake_fluid

What's everyone elses thoughts?

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Fri Jan 15, 2010 8:24 pm

Lucas Grand Prix 600

Its not cheap, and I know its a higher specification than DOT 4. I have used it in my XR6 supercharger... it was about $60 per litre from memory...

I think you will find that most high-performance drag, rally, race applications use this one...

User avatar
simo
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Wed Jul 22, 2009 9:45 pm
Location: Ulverstone, TAS, Australia

Postby simo » Fri Jan 15, 2010 8:30 pm

Thanks tryg!

That stuff looks good to! To many options lol!

Can you get this from Repco or any other auto places?

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Fri Jan 15, 2010 8:49 pm

I didnt get it at Repco, Autobarn or Supercheap.... When I was in Darwin I bought it through a race shop....

I will do some quick research for you.

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Fri Jan 15, 2010 8:56 pm

Found a place in Brisbane; http://www.gslrallysport.com/shop/

Prices seem to be between $60 - $79

Find a local merchant carrying TRW gear and they will be able to get it in for you!

User avatar
exaltd
Lancer Evolution
Lancer Evolution
Posts: 796
Joined: Thu Aug 06, 2009 12:19 pm
Location: Melbourne, VIC, Australia

Postby exaltd » Sat Jan 16, 2010 12:08 am

Motul Dot 4? :P

Or perhaps if you're going track... Motul RBF Racing brake fluid? :P

Just a suggestion... I have no clue if the DOT 4 one is actually any good...

However, I do know if you spend the money - The RBF Racing fluids are excellent :)

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Sat Jan 16, 2010 12:11 am

Motul is an excellent brand. I used Motul products exclusively on my Ducati. Can't believe she's been gone a week now :(

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sat Jan 16, 2010 2:51 am

You sold you Duc? :shock:

I replaced mine with PBR Gold SuperDOT4... muuuuch better than OEM. And still a reasonable price.

(My pedal feel was shite before, that's what I get for destroying the fluid by boiling it too much :twisted:

User avatar
Mizta B
Alumni
Alumni
Posts: 5867
Joined: Sun Dec 21, 2008 8:29 am
Location: Mortdale, NSW, Australia

Postby Mizta B » Sat Jan 16, 2010 8:43 am

I've bought some HKS F-706 Racing Brake Fluid from JustJDM,
It's a little pricey,but I believe it will be worth it,as I track the car.
I'll soon find out if it's as good as they say at Wakefield.
It's going in soon with HAWK ceramic pads front and rear as well. :)
Australasian Gerbil Rearers Organisation, Official Re-Seller.
Image
MY09 Rally Red VRX ClubCJ's 1st 4B12 2.4L - CCJ Lifetime Member #0004.
Merlinised....

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Sat Jan 16, 2010 10:30 am

I told you Adrian, she went bye byes.. Well, I thought I mentioned I had a buyer for $35K...

GONE! I am looking at updating the Moto Guzzi, so she too will be for sale...

I can see a new one coming soon!

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sat Jan 16, 2010 10:37 am

Oh, I think I do remember now you did mention something about it... But I clearly remember you say you'd never ever sell the Guzzu!! haha

But an update is a good excuse to sell it haha

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Sat Jan 16, 2010 10:40 am

gawd.. I would put the money into an EVO if the wife would let me. I saw an Evo Ten, for $53K (Black sedan demo with low kays) with the plates EVO TEN..!

But, she demands we put the money into mortgage...

But, there will have to be enough to allow me to buy new bike at some stage...!

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sat Jan 16, 2010 10:43 am

Tell you what tryg, go and take one for a test drive, and take her with you! i'm sure she will fall in love with it then haha

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Sat Jan 16, 2010 11:08 am

are you kidding, she drives like 'nanna' and has no interest in even letting me do the brakes/turbo...

I am starting to read too many reports about CVTs going bunkus after turbo-ing... hoping RRM has sorted their sh!t out.... hate to be buying a new CVT box...

but she said I can have the 7 grand to do these last projects

User avatar
simo
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Wed Jul 22, 2009 9:45 pm
Location: Ulverstone, TAS, Australia

Postby simo » Sun Jan 17, 2010 10:05 am

Thanks for your input guys!

Sounds like I've got a few good choices to choose from, I'll just have to make up my mind lol! :?

How much was the stuff that you put in yours Adrian?


Return to “Maintenance”

Who is online

Users browsing this forum: No registered users and 10 guests