ITEM: 4 es wheels + tyres with hub caps
LOCATION: Padstow, Sydney, NSW
ITEM CONDITION: Almost new
REASON FOR SELLING: I need the money and they're doing nothing
PRICE AND PAYMENT CONDITIONS: $350 cash on pickup
EXTRA INFO: They are in good condition and have been sitting under my house covered in plastic. They were removed from my car at approx 700kms when i got my rims. I was planning to use these as track tyres but i'm no longer going to take my car on tack.
CONTACT INFO: Luke 0402128105 or PM (please text or make sure your phone isn't on private).
-EDIT- I'd be happy to sell the wheels seperately at $90 each, but only if i can get 3 or 4 ppl willing to buy first. (I just don't want to be stuck with 3 or 2 tyres).
Cheers
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
FS - es wheels + tyres (done 700km) $90 ea.
Moderators: Moderators, Senior Moderators
- Spewman
- INACTIVE Member Account
- Posts: 63
- Joined: Tue Sep 01, 2009 4:51 pm
- Location: Padstow, Sydney, Australia
FS - es wheels + tyres (done 700km) $90 ea.
Last edited by Spewman on Mon Feb 22, 2010 7:08 pm, edited 1 time in total.
- Bandit
- Lancer Legend
- Posts: 1170
- Joined: Tue Dec 09, 2008 8:56 am
- Location: The People's Republic of Campbelltown
They will but you'd have to have the boot floor in its higher position. I do all the time anyway as I have the Mitsubishi boot liner in there, which requires the floor raised. I would keep the space saver on the off chance a load goes in the back that requires the floor down (never happened so far!).
ClubCJ's first Sportback
- Bandit
- Lancer Legend
- Posts: 1170
- Joined: Tue Dec 09, 2008 8:56 am
- Location: The People's Republic of Campbelltown
Thanks Spewman - it's a good bit of gear for sure....
For guys wth sedans I think you would need to buy a kit from Mistubishi that raises the floor to fit the full sized spare in. I have seen a picture of it before, it looks like bits of foam that go under the floor to raise it. I have a Sportback which has two floor heights anyway, the higher of which will fit the full size spare in without any modification.
For guys wth sedans I think you would need to buy a kit from Mistubishi that raises the floor to fit the full sized spare in. I have seen a picture of it before, it looks like bits of foam that go under the floor to raise it. I have a Sportback which has two floor heights anyway, the higher of which will fit the full size spare in without any modification.
ClubCJ's first Sportback
-
- Lancer Newbie
- Posts: 26
- Joined: Sun Apr 12, 2009 5:34 pm
- Location: Melbourne, VIC, Australia
Full size spare in sedan.
You will need a longer bolt to secure wheel into wheel well. The bolt that works with the space-saver is not long enough for a full size spare.
For the floor you can DIY a floor using a piece of custom cut MDF. Due to the limitations of the width boot opening you won't get it perfectly fitting, but its close enough.
You will need a longer bolt to secure wheel into wheel well. The bolt that works with the space-saver is not long enough for a full size spare.
For the floor you can DIY a floor using a piece of custom cut MDF. Due to the limitations of the width boot opening you won't get it perfectly fitting, but its close enough.
Who is online
Users browsing this forum: No registered users and 38 guests