***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Bucket seats a few brands and prices
Moderators: Moderators, Senior Moderators
if you've got airbags in your seats then a seat upgrade isn't an option. according to ADR requirements, you must retain the safety level of your car. upgrading is fine for ES/RX models without safety package.
Blitz Air Filter | RPW Stage 1 ECU Flash Tune | UR Front Tower Strut Bar | UR Rear Lower Bar
Alpine iDA-X305 headunit | LED Taillights | VG Sharkfin Antenna
Alpine iDA-X305 headunit | LED Taillights | VG Sharkfin Antenna
- Superintendent Chalmers
- Lancer Legend
- Posts: 1003
- Joined: Wed Apr 01, 2009 10:33 am
- Location: Townsville, QLD, Australia
- Superintendent Chalmers
- Lancer Legend
- Posts: 1003
- Joined: Wed Apr 01, 2009 10:33 am
- Location: Townsville, QLD, Australia
- Superintendent Chalmers
- Lancer Legend
- Posts: 1003
- Joined: Wed Apr 01, 2009 10:33 am
- Location: Townsville, QLD, Australia
- exaltd
- Lancer Evolution
- Posts: 796
- Joined: Thu Aug 06, 2009 12:19 pm
- Location: Melbourne, VIC, Australia
You guys might like this
Recaro now have a seat out that has a side airbag included ADR approved, i guess
http://www.idealseat.com.au/html/03_erg ... rgo_e.html
Don't know if it's for racing use though
-EXALTD-
Recaro now have a seat out that has a side airbag included ADR approved, i guess
http://www.idealseat.com.au/html/03_erg ... rgo_e.html
Don't know if it's for racing use though
-EXALTD-
dont get me wrong i like sports seats but after a while they get annoying
if i was going to get some id probably look for a smashed evo 7/8/9 and just take them and get the rails modified if needed
if i was going to get some id probably look for a smashed evo 7/8/9 and just take them and get the rails modified if needed
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
coming from a RA, airbags are a must - i have done a bit of searching - to get the evo x seats from mitsubishi, you'll be looking at about $6800 each. the other option is something like this which i found through willshire motor trimmers for about $3200 per seat and can be trimmed in leather, suede or a combination of the two (which has the side air bags)
the final option, which seems to be the most cost effective, is to replace the factory foam for a stiff foam which they'll mould to the existing shape which will help keep you in place. that would be around $850 per seat
the final option, which seems to be the most cost effective, is to replace the factory foam for a stiff foam which they'll mould to the existing shape which will help keep you in place. that would be around $850 per seat
we are fascinated by that which can destroy us...
Who is online
Users browsing this forum: No registered users and 28 guests