Then I caulked a bead of goldflex and trowled it off with a smooth butter knife to get a nice neat bead to be masked and sprayed to match the car for a seamless finish at a later date.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
lukeaday's body kit install
Moderators: Moderators, Senior Moderators
Next is the side skirts 
I had to purchase some more mesh from Atuobarn because the place I purchased the side skirts from alrady fitted the mesh to the raw skirts.
When I removed the mesh it cracked and snapped in half.
Anyway, I made up some more and used Black goldflex to glue them in place as well as adding patches of black vinyl to the inside of the skirts so that when you look through the mesh you cant see the overspray.
I also added a 20mm strip of 1mm polycarbonate to the raw edge that tucks under the car to give it more strength.
From now on it all of the same processes that I did on the rear lip are the same fro mthe side skirts in regards to fitting them out.
I had to purchase some more mesh from Atuobarn because the place I purchased the side skirts from alrady fitted the mesh to the raw skirts.
When I removed the mesh it cracked and snapped in half.
Anyway, I made up some more and used Black goldflex to glue them in place as well as adding patches of black vinyl to the inside of the skirts so that when you look through the mesh you cant see the overspray.
I also added a 20mm strip of 1mm polycarbonate to the raw edge that tucks under the car to give it more strength.
From now on it all of the same processes that I did on the rear lip are the same fro mthe side skirts in regards to fitting them out.
Official ClubCJ Sponsor.
I painted it today.
It's in the booth drying off.
On monday Iwill mask up the vents, fog light surrounds and the lower lip section and paint it black to match the rear lip.
The same as this.
I was also thinking about painting the upper grill surround the same colour as the car like in the pic above
It's in the booth drying off.
On monday Iwill mask up the vents, fog light surrounds and the lower lip section and paint it black to match the rear lip.
The same as this.
I was also thinking about painting the upper grill surround the same colour as the car like in the pic above
Official ClubCJ Sponsor.
)
-
scraverX
- Lancer MASTER
- Posts: 1590
- Joined: Fri Oct 30, 2009 8:12 am
- Location: Canberra, Australia
- Contact:
Looking real good there. As others have said, looks much better actually on the car. Can't wait to see more pics.
"Max" 2009 MY10 RX, Black. CCJ Lifetime Premium Member #0125
Car & Home audio nut.
Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS
Home Audio: Denon, Epos, Pro`ject, AKG
Car & Home audio nut.
Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS
Home Audio: Denon, Epos, Pro`ject, AKG
Who is online
Users browsing this forum: Majestic-12 [Bot] and 55 guests