***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Where to get Carbon Fibre Material

Lancer Interior Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Thu Dec 24, 2009 10:17 pm

SIR-VRX wrote:I tired it on a sample dash part out of another car i had. Sanded it back, sprayed on a spray adhesive (not Super77 though) and it has stuck well. Can't pull it off easy at all. So far so good.

Waiting to get some dash and door trims from the wreckers so I can do my car... don't want to destroy my VRX ones ;)


hey adrian you know youdont have to sand it back, if you use a good glue it will stick fine and you can take it back as it doent hurt your piece your doing and you dont have to scratch it up. so it will be reversable.
and just cause 3M makes doesnt make it the best for the person that stated the 3M product.(not adrian)

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Thu Dec 24, 2009 10:19 pm

Yeah I know you don't need to sand it, but this piece I did to see if it stuck better.

I'd still rather use spare trims to avoid wrecking mine

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Thu Dec 24, 2009 10:33 pm

ah ok, well it should tecnically stick better, but yer not nesaserry
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM

Sickbunny
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 391
Joined: Sun Oct 04, 2009 11:29 am

Postby Sickbunny » Fri Dec 25, 2009 1:50 am

Ooooh thanks for posting the link to the Neffy wrap Adrian :D
ive got a yard of it on the way now too :D im going to try and do all the silver trim pieces.

User avatar
Mad Dogg
Lancer Newbie
Lancer Newbie
Posts: 38
Joined: Mon Nov 09, 2009 6:36 pm
Location: Rockhampton, Qld

Postby Mad Dogg » Fri Dec 25, 2009 3:29 am

SIR-VRX wrote:Waiting to get some dash and door trims from the wreckers so I can do my car... don't want to destroy my VRX ones ;)

lol, I actually went to one of the local wreckers today to look for trims to experiment on and so I'd have a spare to put back on if it doesn't work out. Didn't have any CJ's though. Will check out the other wreckers in town next week. If they don't have any I'll just look for some similar trims on other cars and experiment with them.

What adhesive would everyone recommend? I mentioned the Super77 earlier as that's the stuff that you can get sent with the neffy wrap in quite a good deal, but obviously that deal is only worth it if the Super77 is the best adhesive to use. On other forums people have used 3M 90 with mixed results, it holds great but is supposedly much harder to fit as you have to get it right straight away.
Image

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Fri Dec 25, 2009 9:49 am

I think we have all started a run on spare console, trim parts for CJ Lancers in Australia... all the wreckers will put their prices up now !!!

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Fri Dec 25, 2009 9:50 am

I know my wreckers had 2 ES models last I was there...

Hope they still have at least 1 for me!! haha

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Fri Dec 25, 2009 10:20 am

Oh Adrian.. I need some new parts, can I get them !!!

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Fri Dec 25, 2009 10:56 pm

We can go for a trip on Monday if they are open ;)

If not leave me a shopping list and I'll go down during the week and if you'll be at the meet on the 3rd you can collect!

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Fri Dec 25, 2009 11:25 pm

You're such a good fella!

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Mon Dec 28, 2009 10:13 pm

For all those on the sidelines waiting to do this, I just saw Draevon's VR today.. he did the Neffywrap himself and it's 110% perfect and such a good look !!!

It really compliments his silver Lancer and unless I can get my matt black decals I am up for doing this too... just hoping I can get it as neat as his is!

User avatar
arutha
Lancer Ralliart
Lancer Ralliart
Posts: 649
Joined: Sun Jul 19, 2009 8:26 pm
Location: Brisvegas

Postby arutha » Mon Dec 28, 2009 10:17 pm

pics?
Born at JustJDM's 'ninjaworks' facility,
Honed into a weapon by Mercury Motorsport
Image

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Mon Dec 28, 2009 10:24 pm

Will have to either ask Draevon or I will grab some on 3 Jan at our mini-meet (unless you make it up the hill yourself Arutha!)

User avatar
draevon
Lancer Ralliart
Lancer Ralliart
Posts: 689
Joined: Fri Oct 23, 2009 9:09 am
Location: Brisbane
Contact:

Postby draevon » Mon Dec 28, 2009 11:19 pm

Aha ... thanks dude :) ... I'm going to take some pics of all my mods for my garage over the next few days so will put some in this thread once I get them done.
.
Image
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.

User avatar
cjay
Lancer ES/EX
Lancer ES/EX
Posts: 169
Joined: Sun Nov 22, 2009 5:32 pm
Location: port macquarie nsw australia

Postby cjay » Tue Dec 29, 2009 1:56 am

sorry to ask a really stupid question, but is it a fabric or a film wrap?
the site says fabric, but it looks like a film, like contact but without sticky stuff on the back.


Return to “Interior”

Who is online

Users browsing this forum: No registered users and 21 guests