***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Spray adhesive for Suede Interior

Lancer Interior Modifications.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
Stoney
INACTIVE Member Account
Posts: 66
Joined: Tue Dec 08, 2009 1:49 am
Location: The "friend zone".

Spray adhesive for Suede Interior

Postby Stoney » Fri Dec 11, 2009 2:47 pm

Hi all, first thread

I was wanting to know what the best spray adhesive is out there for people wanting to do a suede interior

I want a good quality brand adhesive that doesn't leave "stains"

post up some ideas

Cheers!
Charles Darwin was right. To achieve genetic perfection, you need Evolution.
----------------------------
Image
User avatar
draevon
Lancer Ralliart
Lancer Ralliart
Posts: 689
Joined: Fri Oct 23, 2009 9:09 am
Location: Brisbane
Contact:
Contact draevon

Postby draevon » Fri Dec 11, 2009 3:10 pm

I was researching this when planning to do my CF interior. Most forums say the best stuff for this kind of thing is 3M Super 77 Spray adhesive ... Your main problem is going to be tracking some down. I couldn't find it anywhere is Brisbane.
.
Image
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.
User avatar
Stoney
INACTIVE Member Account
Posts: 66
Joined: Tue Dec 08, 2009 1:49 am
Location: The "friend zone".

Postby Stoney » Fri Dec 11, 2009 3:56 pm

draevon wrote:I was researching this when planning to do my CF interior. Most forums say the best stuff for this kind of thing is 3M Super 77 Spray adhesive ... Your main problem is going to be tracking some down. I couldn't find it anywhere is Brisbane.

what stores have you been looking at? I'll check some over here in Perth and see if they have any.
Charles Darwin was right. To achieve genetic perfection, you need Evolution.

----------------------------

Image
User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Fri Dec 11, 2009 6:30 pm

Stoney, when I did my interior I was recommended a brand from Spotlight, I can't remember what it was called though :(

You could try talk to them to see what they have/recommend, there are a few trimming experts in the forum though, one of them might see this thread and share there expertise :)
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster
User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Fri Dec 11, 2009 7:20 pm

In Brissy try Daleys they were out in archerfield last time I bought from them
Image

[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]
User avatar
Stoney
INACTIVE Member Account
Posts: 66
Joined: Tue Dec 08, 2009 1:49 am
Location: The "friend zone".

Postby Stoney » Fri Dec 11, 2009 7:21 pm

Graham wrote:Stoney, when I did my interior I was recommended a brand from Spotlight, I can't remember what it was called though :(

You could try talk to them to see what they have/recommend, there are a few trimming experts in the forum though, one of them might see this thread and share there expertise :)

ah k, cheers Graham

Spotlight is where I'm getting my Suede from, so I'll ask around there.
Charles Darwin was right. To achieve genetic perfection, you need Evolution.

----------------------------

Image
User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Sun Dec 13, 2009 1:22 pm

I must be lucky, 3M Super 77 is available at Office Works !
User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Sun Dec 13, 2009 1:26 pm

Oh, should have said also, if you have a Blackwoods tools shop in your area, you can get all the 3M adhesives there, 75, 76, 77, 90 etc

Good luck.
jhiace
INACTIVE Member Account
Posts: 18
Joined: Mon Sep 28, 2009 9:36 pm
Location: Newcastle

Postby jhiace » Tue Dec 15, 2009 4:21 pm

As speedie said. Go and see Daleys if possible, there are plenty of other trim suppliers around that sell glue too but i will warn you now, the pressure pack can stuff is shit and wont work. I would definately not use it on a roof lining as gravity will take over very quickly!
User avatar
arutha
Lancer Ralliart
Lancer Ralliart
Posts: 649
Joined: Sun Jul 19, 2009 8:26 pm
Location: Brisvegas

Postby arutha » Tue Dec 15, 2009 5:05 pm

yep tryg is on the money as usual. blackwoods stock it. i used the fullers spray adhesive when i did my interior and it worked brilliantly. we also used it to do my mates roof and it worked well with his new embossed design. gravity hasn't overtaken it yet and its been 18 months
Born at JustJDM's 'ninjaworks' facility,
Honed into a weapon by Mercury Motorsport
Image
Post Reply

Return to “Interior”

Who is online

Users browsing this forum: No registered users and 20 guests