***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

UHF Base Units

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

User avatar
drake89
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 478
Joined: Tue Sep 08, 2009 4:21 pm
Location: Gold Coast, Australia
Contact:

UHF Base Units

Postby drake89 » Sun Nov 15, 2009 3:26 pm

Anyone install a UHF system yet? im looking into it atm

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sun Nov 15, 2009 4:12 pm

I have thought about it, in previous cars, not the CJ.

I did some research into it, but then canned the idea as I didn't want to fit an antenna for it.

I just have a $100 pair of portable UHFs, good enough for the purpose (cruises)

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Sun Nov 15, 2009 4:30 pm

I had a CB in my Outlander, but it looks normal with UHF antenna hanging off it!!

A mate of mine installed a CB in his corolla, and put the antenna horizontally in the engine bay. I told him that he was an idiot. Range was no better than a handheld.

I just have a cheapie Uniden handheld, has about 2 km range which is fine for what I use it for.

User avatar
Mizta B
Alumni
Alumni
Posts: 5867
Joined: Sun Dec 21, 2008 8:29 am
Location: Mortdale, NSW, Australia

Postby Mizta B » Sun Nov 15, 2009 4:52 pm

I've got a handheld Uniden as well,it's good enough for cruises,approx 2kms line of site range,that's good enough I think!
Don't want to drill holes for an aerial.... 8)
Australasian Gerbil Rearers Organisation, Official Re-Seller.
Image
MY09 Rally Red VRX ClubCJ's 1st 4B12 2.4L - CCJ Lifetime Member #0004.
Merlinised....

bd-850
Alumni
Alumni
Posts: 4486
Joined: Sat Apr 25, 2009 6:37 pm

Postby bd-850 » Sun Nov 15, 2009 8:36 pm

just put a bull bar and cat mud flaps on as well ;)

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sun Nov 15, 2009 8:39 pm

Don't forget the side running lights, Kenworth front bar, R.M. Williams sitckers and the cowboy hat

bd-850
Alumni
Alumni
Posts: 4486
Joined: Sat Apr 25, 2009 6:37 pm

Postby bd-850 » Sun Nov 15, 2009 8:43 pm

gota have the spotties and the 50 arials where only one works and lowered to all buggerie

User avatar
scraverX
Lancer MASTER
Lancer MASTER
Posts: 1590
Joined: Fri Oct 30, 2009 8:12 am
Location: Canberra, Australia
Contact:

Postby scraverX » Sun Nov 15, 2009 9:33 pm

I had a CB years ago, but that was on a car that had old style roof gutters you could clamp a mount to.

Also had a magnetic antenna mount for a while.
"Max" 2009 MY10 RX, Black. CCJ Lifetime Premium Member #0125
Car & Home audio nut.
Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS
Home Audio: Denon, Epos, Pro`ject, AKG

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Sun Nov 15, 2009 9:34 pm

LOL - It's funny 'coz I see it all the time...

I wouldn't mind a UHF base unit as long as it looks tidy, but for now handhelds suffice :)
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

User avatar
scraverX
Lancer MASTER
Lancer MASTER
Posts: 1590
Joined: Fri Oct 30, 2009 8:12 am
Location: Canberra, Australia
Contact:

Postby scraverX » Sun Nov 15, 2009 11:17 pm

There are some really tidy ones, if you're prepared to pay. Remote face plate, main unit mounts up under the dash or under a seat, pretty much anywhere. Just the Antenna to figure out.
"Max" 2009 MY10 RX, Black. CCJ Lifetime Premium Member #0125

Car & Home audio nut.

Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS

Home Audio: Denon, Epos, Pro`ject, AKG

User avatar
drake89
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 478
Joined: Tue Sep 08, 2009 4:21 pm
Location: Gold Coast, Australia
Contact:

Postby drake89 » Mon Nov 16, 2009 12:34 am

yeah ive got my eye on a unit that goes under dash and the handpiece has all the buttons and display on itv and a built in scanner. either that or a DIN mount to go under a head unit... its just soughting out the arial thats got me stumpted

User avatar
scraverX
Lancer MASTER
Lancer MASTER
Posts: 1590
Joined: Fri Oct 30, 2009 8:12 am
Location: Canberra, Australia
Contact:

Postby scraverX » Mon Nov 16, 2009 12:46 am

Somewhere I have, or had, a metal bracket that was shaped to fit under a fender bolt under the edge of the boot or bonnet. Probably the best option if you want it fixed. Other option is a magnetic mount on the roof (with some kind of thin plastic disk under so it doesn't scratch the paint) these are easy to take off an tuck away when not in use.
"Max" 2009 MY10 RX, Black. CCJ Lifetime Premium Member #0125

Car & Home audio nut.

Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS

Home Audio: Denon, Epos, Pro`ject, AKG

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Mon Nov 16, 2009 7:52 am

Yeah, if I were to install a UHF radio I'd try and go with an antenna on the roof or rear/front window - Only problem with this is that because it's not DIRECTLY COUPLED It'll lose a fair bit, if not most of it's range.

Sort of the same scenario when I was doing tech support for Telstra mobile network coverage, people would buy a really expensive carkit for where signal was low in rural areas and they wouldn't have it directly attached to the antenna, or it would be going through bluetooth and they wonder why it doesn't improve reception :P
Four wheels move the body, two wheels move the soul.

ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Mon Nov 16, 2009 8:35 am

Not all UHF CB external antennas necessarily require drilling!

I have an RFI on-glass antenna. It looks like a mobile phone antenna and is pretty easy to change between cars as well. It is the same antenna that NSW Police use (although theirs aren't tuned to 477MHz like the CB oens are). The link below has an updated version of the same antenna -

http://www.prestigecom.net.au/index.php ... cts_id=275

I have a detachable face Uniden UH015SX with external speaker - works a treat. The face is near the dashboard and the speaker fits underneath the hand brake. The rest of the radio and bits and pieces are in the back of the car.

The on-glass antenna reception is not as good as a ground independent 6dB+ gain antenna, but they are better than any hand held (coupled with the extra Tx power of the non-hand held radios).
ClubCJ's first Sportback

WallyD
Lancer Newbie
Lancer Newbie
Posts: 84
Joined: Fri Oct 09, 2009 12:50 pm
Location: Sydney, Australia

Postby WallyD » Mon Nov 16, 2009 8:56 pm



Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 14 guests