Hi can u put me down for,
Front Strut Bar UR-TW2-440 (2.0KG)= A$110ea
Lancer 07+ Rear Lower Bar : UR-RL2-447 =A$100
Regards
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* UR Braces - ClubCJ GBuy Nov'10 R5
Moderator: Senior Moderators
- exaltd
- Lancer Evolution
- Posts: 796
- Joined: Thu Aug 06, 2009 12:19 pm
- Location: Melbourne, VIC, Australia
Thank you Ofey
To everyone, this UR bracing really works wonders with the car's handling! Installed Front and rear strut today, and it makes a world of difference already - I can definitely feel the difference, and the Stability control isn't going crazy as well any more, because the tyres are well planted
JUST AN IMPORTANT TIP THAT I CAN'T STRESS MORE: THOSE WHO HAVE THE FULL SIZE SPARE WHEEL AND ASSOCIATED FOAM KIT - THE REAR STRUT PAIR DOES NOT FIT! IT CLASHES WITH THE TYRE AND YOU MUST CHOOSE ONE OR THE OTHER. I found this out the hard way, so please don't make the same mistake as me.
I have yet to find a solution, will be browsing Bunnings tomorrow for some retrofitting answers Keep you all posted.
Take care and happy driving,
-EXALTD-
To everyone, this UR bracing really works wonders with the car's handling! Installed Front and rear strut today, and it makes a world of difference already - I can definitely feel the difference, and the Stability control isn't going crazy as well any more, because the tyres are well planted
JUST AN IMPORTANT TIP THAT I CAN'T STRESS MORE: THOSE WHO HAVE THE FULL SIZE SPARE WHEEL AND ASSOCIATED FOAM KIT - THE REAR STRUT PAIR DOES NOT FIT! IT CLASHES WITH THE TYRE AND YOU MUST CHOOSE ONE OR THE OTHER. I found this out the hard way, so please don't make the same mistake as me.
I have yet to find a solution, will be browsing Bunnings tomorrow for some retrofitting answers Keep you all posted.
Take care and happy driving,
-EXALTD-
ofey, you put me in the VIC list! I'm in NSW.
Good thing to be aware of exaltd, this will also apply to the RA somewhat cause of the shallower boot floor.
99% sure I can get it to fit by sliding my spare (spacesaver) as far back, this should give me clearance. Well hope for the best!
Though cant avoid chopping the foam out.
Good thing to be aware of exaltd, this will also apply to the RA somewhat cause of the shallower boot floor.
99% sure I can get it to fit by sliding my spare (spacesaver) as far back, this should give me clearance. Well hope for the best!
Though cant avoid chopping the foam out.
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
This below is now the FINAL price list. This R2 sale is NOW closed. For those with my bank details, please pay now.
Please note these are only the part prices and does not include shipping.
I am proposing this time that I group ship it all to me here in Melbourne before I dispatch it out to each state rather than directly to the rest of the states as the shipping size isn't as big as round 1 and makes for a more convenient process. And in addition it's much fairer that the high cost of shipping from Malaysia to here is shared by EVERYONE rather than a few like in the last round. Shipping within Australia will then be much cheaper.
PRICING
Rear Anti-roll/Sway Bar UR-AR23-136 (3.8KG)= A$240ea
Front Strut Bar UR-TW2-440 (2.0KG)= A$110ea
Rear Strut Bar / Rear Tower Bar UR-RE4-441 (1.9KG)= A$120ea
Front Lower Bar UR-LA4-442 (1.8KG)= A$120ea
REAR LOWER BAR "PAIR" (4 Point) UR-RL4-444P (0.8kg)= A$110ea
Rear Lower Bar UR-RL2-447 (1.2KG)= A$100ea
All prices are solely for parts. Shipping from Malaysia is NOT included.
Round 2:
VIC
CJ08=Front Strut Bar UR-TW2-440 (2.0KG)= A$110ea
Rear Lower Bar : UR-RL2-447 =A$100
Squala=Front Strut Bar UR-TW2-440 (2.0KG)= A$110ea
Rear Lower Bar : UR-RL2-447 =A$100
NSW
KRZ = Rear Lower Bar UR-RL2-447 (1.2KG)= A$100ea
Front Lower Bar UR-LA4-442 (1.8KG)= A$120ea
billyboy=Rear Strut Bar / Rear Tower Bar UR-RE4-441 (1.9KG)= A$120ea
QLD
SIR-VRX = 1x Rear Strut Bar / Rear Tower Bar UR-RE4-441 (1.9KG)= A$120ea
Krispy = Front Lower Bar UR-LA4-442 (1.8KG)= A$120ea
Rear Lower Bar UR-RL2-447 (1.2KG)= A$100ea
Rear Strut Bar / Rear Tower Bar UR-RE4-441 (1.9KG)= A$120ea
drake89 = Front Lower Bar UR-LA4-442 (1.8KG)= A$120ea
Rear Lower Bar UR-RL2-447 (1.2KG)= A$100ea
Rear Strut Bar / Rear Tower Bar UR-RE4-441 (1.9KG)= A$120ea
tryg = Front Strut Bar UR-TW2-440 (2.0KG)= A$110ea
Rear Lower Bar (1.2KG): UR-RL2-447 =A$100
Please note these are only the part prices and does not include shipping.
I am proposing this time that I group ship it all to me here in Melbourne before I dispatch it out to each state rather than directly to the rest of the states as the shipping size isn't as big as round 1 and makes for a more convenient process. And in addition it's much fairer that the high cost of shipping from Malaysia to here is shared by EVERYONE rather than a few like in the last round. Shipping within Australia will then be much cheaper.
PRICING
Rear Anti-roll/Sway Bar UR-AR23-136 (3.8KG)= A$240ea
Front Strut Bar UR-TW2-440 (2.0KG)= A$110ea
Rear Strut Bar / Rear Tower Bar UR-RE4-441 (1.9KG)= A$120ea
Front Lower Bar UR-LA4-442 (1.8KG)= A$120ea
REAR LOWER BAR "PAIR" (4 Point) UR-RL4-444P (0.8kg)= A$110ea
Rear Lower Bar UR-RL2-447 (1.2KG)= A$100ea
All prices are solely for parts. Shipping from Malaysia is NOT included.
Round 2:
VIC
CJ08=Front Strut Bar UR-TW2-440 (2.0KG)= A$110ea
Rear Lower Bar : UR-RL2-447 =A$100
Squala=Front Strut Bar UR-TW2-440 (2.0KG)= A$110ea
Rear Lower Bar : UR-RL2-447 =A$100
NSW
KRZ = Rear Lower Bar UR-RL2-447 (1.2KG)= A$100ea
Front Lower Bar UR-LA4-442 (1.8KG)= A$120ea
billyboy=Rear Strut Bar / Rear Tower Bar UR-RE4-441 (1.9KG)= A$120ea
QLD
SIR-VRX = 1x Rear Strut Bar / Rear Tower Bar UR-RE4-441 (1.9KG)= A$120ea
Krispy = Front Lower Bar UR-LA4-442 (1.8KG)= A$120ea
Rear Lower Bar UR-RL2-447 (1.2KG)= A$100ea
Rear Strut Bar / Rear Tower Bar UR-RE4-441 (1.9KG)= A$120ea
drake89 = Front Lower Bar UR-LA4-442 (1.8KG)= A$120ea
Rear Lower Bar UR-RL2-447 (1.2KG)= A$100ea
Rear Strut Bar / Rear Tower Bar UR-RE4-441 (1.9KG)= A$120ea
tryg = Front Strut Bar UR-TW2-440 (2.0KG)= A$110ea
Rear Lower Bar (1.2KG): UR-RL2-447 =A$100
Last edited by ofey on Tue Oct 27, 2009 8:38 pm, edited 1 time in total.
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Just a friendly bump to those who have not paid up R2:
CJ08
Squala
Spewman
SIR-VRX
krispy
drake89
Please do so ASAP?
CJ08
Squala
Spewman
SIR-VRX
krispy
drake89
Please do so ASAP?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
ofey wrote:Just a friendly bump to those who have not paid up R2:
CJ08
Squala
Spewman
SIR-VRX
krispy
drake89
Please do so ASAP?
Ofey, can you please let me know if that payment has hit your bank yet?
I have confirmation from my bank - if there are any issues I can follow them up as soon as you let me know.
Paid - Confirmation 163419 27/10/2009 Immediate Pay Anyone xxxxxx xxxx CCJ UR brace KRISPY 302078866 $340.00
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 12 guests