***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
The X-Factordesign.com Design Competition
Moderators: Moderators, Senior Moderators
- Speedie
- Lancer MASTER
- Posts: 1751
- Joined: Thu Mar 05, 2009 11:42 pm
- Location: Brisbane, QLD, Australia
As we all know Mitsubishi did a shitty job with the full size spare wheel kit. Polystyrene rubbish. My idea is to have a modular plastic one, actual compartments you can use, Also have the sub box as an option instead of the side compartment, of cause left and right available. Also the lid for the spare wheel would be a hard plastic so it doesn't buckle when weight is added to the top.
Sub box would be for a 12" sub but have an addaptor to fit the 10" standard Rockford Fosgate.
The plastic would look OEM but you have the option of a rubberised top or to reuse your old boot carpet.
Pics to follow
Sub box would be for a 12" sub but have an addaptor to fit the 10" standard Rockford Fosgate.
The plastic would look OEM but you have the option of a rubberised top or to reuse your old boot carpet.
Pics to follow
[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]
Shadows, could you remake the fog surround cover (plate) to reuse the fogs but include a line of DRLs (Daytime Running Lights) along the top of the cover?
The line of DRLs only needs to be very thin but be bright enough for daytime use.
I know that the next-gen Ralliart may have this, but was hoping to have a solution that would not require a whole new bumper assembly to have the DRLs. Also, a truly integrated look would be miles better than stick-on SMD strips or something equally tacky.
My aim is to enhance the look of our current model with two options, one is to engineer the same look as the concept X and to add the fogs back again for the second option. I think having both would be very unique (and that being a direct drop in option; no new bumper required would bring it up a notch).
This is what the current Commodore facelift aims to achieve. So we would be bringing our vehicles up to the current thinking, and allowing us to run a bright forward light (but not headlight) and not running our fogs (which is now all but illegal when fog is not present).
The Holden Commodore look (and ostensibly what should be copied)
For your consideration.
The line of DRLs only needs to be very thin but be bright enough for daytime use.
I know that the next-gen Ralliart may have this, but was hoping to have a solution that would not require a whole new bumper assembly to have the DRLs. Also, a truly integrated look would be miles better than stick-on SMD strips or something equally tacky.
My aim is to enhance the look of our current model with two options, one is to engineer the same look as the concept X and to add the fogs back again for the second option. I think having both would be very unique (and that being a direct drop in option; no new bumper required would bring it up a notch).
This is what the current Commodore facelift aims to achieve. So we would be bringing our vehicles up to the current thinking, and allowing us to run a bright forward light (but not headlight) and not running our fogs (which is now all but illegal when fog is not present).
The Holden Commodore look (and ostensibly what should be copied)
For your consideration.
there is a company in japan that makes that boot. well they make it as part of the boot so its not an actual spoiler its an entire boot. (the one i'm talking about) i don't remember the company but they still make it. the site is in a thread in one of the sections but i don't remember what one.
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM
- Speedie
- Lancer MASTER
- Posts: 1751
- Joined: Thu Mar 05, 2009 11:42 pm
- Location: Brisbane, QLD, Australia
Do-luck made the first duck bill boot, order from here http://www.bulletproofautomotive.com/ca ... hp?ID=6782
Or
http://www.body-kit.com/lan_evox_08_rspectrunk.html - car in picture is a do-luck trunk not a accolade.
Or
http://www.body-kit.com/lan_evox_08_rspectrunk.html - car in picture is a do-luck trunk not a accolade.
[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]
- mitch.honey
- INACTIVE Member Account
- Posts: 797
- Joined: Tue Jan 27, 2009 2:59 pm
- Location: Sydney, NSW, Australia
ok i was thinking of somthing like custom covers for subs so u dont get bags rubbing on your sub and causing holes..
u could have a transformers logo or a club cj one or many other things i know they are already on the market but they are all speaker brands i was thinking somthing more orginal...
i have lacking skills in photoshop so i hopw u get my idea
u could have a transformers logo or a club cj one or many other things i know they are already on the market but they are all speaker brands i was thinking somthing more orginal...
i have lacking skills in photoshop so i hopw u get my idea
Red Tail-light Brigade Member #2
Who is online
Users browsing this forum: No registered users and 15 guests