Does anyone know of a place in the northern suburbs that sells really good black vinyl?
Thanks.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Black vinyl
Moderators: Moderators, Senior Moderators
- lizziev1
- INACTIVE Member Account
- Posts: 20
- Joined: Thu Oct 01, 2009 8:24 pm
- Location: Melbourne, Vic
lzy_eye wrote:Best bet is a local signwriter. Just make sure you tell them that you are using it externally. Some people have been lucky enough to get an offcut big enough for free
Yeah, the only problem is i live in the eastern suburbs, but work in the northern, so i dont know the area well.
Thought i'd ask to see if there are any decent places around here, from their experience.
Thanks for the suggestion
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
I live in the Eastern suburbs as well and when I did m1n1on's car, I think he got them from here:
http://www.mscsigns.com.au/html/home.html
Factory 5/14 Apollo Crt
Blackburn, Vic 3130
• Phone: + 61 3 9894 7311
• Fax: + 61 3 9894 7366
• Email: info@mscsigns.com.au
Good luck!
http://www.mscsigns.com.au/html/home.html
Factory 5/14 Apollo Crt
Blackburn, Vic 3130
• Phone: + 61 3 9894 7311
• Fax: + 61 3 9894 7366
• Email: info@mscsigns.com.au
Good luck!
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- lizziev1
- INACTIVE Member Account
- Posts: 20
- Joined: Thu Oct 01, 2009 8:24 pm
- Location: Melbourne, Vic
ofey wrote:I live in the Eastern suburbs as well and when I did m1n1on's car, I think he got them from here:
http://www.mscsigns.com.au/html/home.html
Factory 5/14 Apollo Crt
Blackburn, Vic 3130
• Phone: + 61 3 9894 7311
• Fax: + 61 3 9894 7366
• Email: info@mscsigns.com.au
Good luck!
Thanks Ofey.
I'll give them a ring thursday and see if i can get me some.
Wont put it on just yet, no idea how to and i dont wanna stuff it up.
- tadz0rz
- Genius
- Posts: 6955
- Joined: Sun Mar 08, 2009 8:54 pm
- Location: Melbourne, VIC, Australia
- Contact:
Well, to be honest, i gotta pull my finger out and organise the next one. We did have one planned for a few weeks back but we had to cancel due to lack of support. We were planning on cruising through the black spur. That might still go ahead depending on support for it when Ofey or I organise it lol.
if you work in the northern suburbs, here's a good one.
Bi-wize.
168a Settlement Road
Thomastown, Victoria, 3074
03 - 9465 1233
http://www.bi-wize.com/
Recommended by JazzyB, they sell lotsa vinyl here and their really cheap, plus their really friendly.
The smallest size they can sell is only $7 compared to a signshop that i asked in the city which is $21.
With $7, you have enough for about two attempts
I tried once but fail miserably , think i was too impatient, doing too much at once lol
Hope i can make it to a meet soon so you guys can help me out with it
Been shifting house , new-born baby in the family and uni work is tough
Bi-wize.
168a Settlement Road
Thomastown, Victoria, 3074
03 - 9465 1233
http://www.bi-wize.com/
Recommended by JazzyB, they sell lotsa vinyl here and their really cheap, plus their really friendly.
The smallest size they can sell is only $7 compared to a signshop that i asked in the city which is $21.
With $7, you have enough for about two attempts
I tried once but fail miserably , think i was too impatient, doing too much at once lol
Hope i can make it to a meet soon so you guys can help me out with it
Been shifting house , new-born baby in the family and uni work is tough
Lancer Evolution 10MR
Who is online
Users browsing this forum: No registered users and 60 guests