***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

EVO Body Kit Conversion

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Fri Oct 02, 2009 11:22 am

My call of it being a VIC rego sticker was most likely right then too !
ClubCJ's first Sportback
User avatar
milobob
Lancer Legend
Lancer Legend
Posts: 1130
Joined: Mon Aug 31, 2009 6:16 pm
Location: Melbourne

Postby milobob » Fri Oct 02, 2009 2:25 pm

It looks wrong though - the wheels at least. Need less offset :(
2010 RenaultSport Megane RS250 Cup Trophee (Xenons+Leather+Front Parkers)
User avatar
Aspired
Lancer Ralliart
Lancer Ralliart
Posts: 682
Joined: Tue Jun 23, 2009 11:11 pm
Location: Melbourne, VIC, Australia

Postby Aspired » Fri Oct 02, 2009 2:44 pm

deano1964 wrote:From what i can make out of that photo

OAKDALE MEAT COMPANY

39-41 Amberley Crescent,
Dandenong, Victoria 3175, Australia

http://www.oakdalemeat.com.au/
Yep looks like your right..
The building next to it is number 24

Image

And looking at their website, they use the same logo.
User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Fri Oct 02, 2009 2:54 pm

milobob wrote:It looks wrong though - the wheels at least. Need less offset :(


Sure does look wrong as it's NOT AN EVO!
ClubCJ's first Sportback
User avatar
PYLee
Lancer MASTER
Lancer MASTER
Posts: 1808
Joined: Wed Aug 05, 2009 1:29 am
Location: Melbourne, VIC

Postby PYLee » Fri Oct 02, 2009 2:57 pm

haha the hunt for this "evo" is up !
Lancer Evolution 10MR
User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:
Contact ofey

Postby ofey » Fri Oct 02, 2009 3:09 pm

I have no problems with any of the bodykit parts, the offsets and all. The problem I have is with the zorst. It's just wrong... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Fri Oct 02, 2009 3:17 pm

They need wider wheels/tyres to fill in the expanded wheelarches - maybe that was done after these pics - and yeah, the exhaust needs to be tucked up under the bumper a bit more! - and should have a twin put in over to the left....
ClubCJ's first Sportback
User avatar
PYLee
Lancer MASTER
Lancer MASTER
Posts: 1808
Joined: Wed Aug 05, 2009 1:29 am
Location: Melbourne, VIC

Postby PYLee » Fri Oct 02, 2009 3:20 pm

the bodykit includes fender arch which makes it a wide bodykit

probably the tyres are stock , so their way to small for the "evo" :D
Lancer Evolution 10MR
User avatar
Stalker
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 352
Joined: Wed Apr 15, 2009 2:20 am
Location: Sunshine Coast, QLD, Australia
Contact:
Contact Stalker

Postby Stalker » Fri Oct 02, 2009 3:28 pm

problem is cause the guards arent flared out, theyre added to, if you put wheels on with a lower offset they would scrape on the guard
Image
SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Fri Oct 02, 2009 8:59 pm

Looks ghey!

Another dead giveaway would be the round fuel filler... Genuine Evos have a square one ;)
User avatar
Ozie
INACTIVE Member Account
Posts: 5445
Joined: Mon Sep 22, 2008 7:00 am
Location: Sydney, NSW, Australia

Postby Ozie » Sat Oct 03, 2009 1:58 am

^ Yes Adrian with those kits all i can say is Rice Rice Baby !!!!!



Ofey whats the go with this kit??
Are the wheel arches widened/rolled out to fit?

Image
User avatar
PYLee
Lancer MASTER
Lancer MASTER
Posts: 1808
Joined: Wed Aug 05, 2009 1:29 am
Location: Melbourne, VIC

Postby PYLee » Sat Oct 03, 2009 3:58 am

loving the rear bumper :D
Lancer Evolution 10MR
User avatar
blanka
INACTIVE Member Account
Posts: 822
Joined: Wed Sep 03, 2008 9:47 pm
Location: Cairns, QLD, Australia

Postby blanka » Sat Oct 03, 2009 9:37 am

that kit should just be bolt on
Uchiha Itachi
Image
rapidryda
INACTIVE Member Account
Posts: 4
Joined: Wed Sep 23, 2009 10:42 am
Location: Gosford, Australia

Postby rapidryda » Sat Oct 03, 2009 3:28 pm

If you look closely the guy is on his p plates (he must be rich!)
http://www.body-kit.com/evox_accolade_cust01.html


Also, go to google and type: 24 Amberley Crescent, Dandenong South VIC 3175 and you can get street view to see the bodyshop that did the work!
User avatar
bye2u
Lancer Legend
Lancer Legend
Posts: 1365
Joined: Wed Jan 28, 2009 3:55 am
Location: Sydney, NSW, Australia

Postby bye2u » Sat Oct 03, 2009 5:08 pm

p plates doesnt always mean that they are young :D could have lost their licence or something etc.. my friend has a evo 6.5 still on p's and he is 25 yrs old :)
Post Reply

Return to “Exterior”

Who is online

Users browsing this forum: Google [Bot] and 31 guests