***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

*CLOSED* Road Race Motorsports Parts Grp Ship

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Oct 02, 2009 9:23 am

Aspired,
And since I'm in contact with them now, don't you want something? You're dealing with me, not them... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
sh00tr
Lancer Newbie
Lancer Newbie
Posts: 46
Joined: Mon Feb 02, 2009 7:08 pm
Location: Sydney, Australia

Postby sh00tr » Fri Oct 02, 2009 11:48 am

hey ofey,

when are you looking at processing this?

Don't hold your breath waiting for a reply....
I have sent them a few emails over the past 3 months and have had no replies. They do not reply to email. If you really and I mean really want to buy something from them you have to call them up. For this reason I will not buy anything off them... Its just a shame, since they have some good looking kit.


lol ive been waiting a yr now to make a move so i have some patience lol savin up to hit the mods in one hit...

p.s (aspired u have a rly gd lookin front grill.. did u buy chrome vinyl?

User avatar
Aspired
Lancer Ralliart
Lancer Ralliart
Posts: 682
Joined: Tue Jun 23, 2009 11:11 pm
Location: Melbourne, VIC, Australia

Postby Aspired » Fri Oct 02, 2009 2:51 pm

sh00tr wrote:p.s (aspired u have a rly gd lookin front grill.. did u buy chrome vinyl?
That is how I want it to look. That pic is just a photoshop.
I've been trying to find a plain bumper cap that I can get chromed, but I havn't been able to find one yet. The chrome vinyl(more like tinsel) breaks down too quickly to use on the front bumper.

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Fri Oct 02, 2009 3:28 pm

why not get a thin piece of aluminum say 1mm sheet then cut and roll it to shape? then get it chromed. if you don't think you can do it then go to a fabricator get them to do it. it will probably be quite simple
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM

User avatar
Mitsiman
Lancer Ralliart
Lancer Ralliart
Posts: 522
Joined: Fri Oct 24, 2008 11:16 am
Location: Perth, WA, Australia
Contact:

Postby Mitsiman » Fri Oct 02, 2009 7:07 pm

With the reflash we are still waiting to get the full range of models so that we can then produce a general release modded map for eveyrone. The general release one will be tweaked slightly on AFR, much improved throtle response, tweaks to variable cam timing and tweaks to ignition timing.

The type of map to those that don't want to spend the money dyno tuning and want some mild gains only.

If you are using OpenPort 2.0 cable anyone with OpenECU shoudl be able to read your rom. You just won't be able to write back to the rom until you get one of our definition files.

Pricing wise, the general purpose map we release will be around $150.00 bracket approx.
For urgent replies to PM's contact via phone

User avatar
blanka
INACTIVE Member Account
Posts: 822
Joined: Wed Sep 03, 2008 9:47 pm
Location: Cairns, QLD, Australia

Postby blanka » Sat Oct 03, 2009 9:31 am

im using openport 2.0 cable with openecu but i keep getting error y is that?
Uchiha Itachi
Image

User avatar
Aspired
Lancer Ralliart
Lancer Ralliart
Posts: 682
Joined: Tue Jun 23, 2009 11:11 pm
Location: Melbourne, VIC, Australia

Postby Aspired » Sat Oct 03, 2009 9:50 am

ofey wrote:Aspired,
And since I'm in contact with them now, don't you want something? You're dealing with me, not them... .
No thanks mate.

User avatar
Mitsiman
Lancer Ralliart
Lancer Ralliart
Posts: 522
Joined: Fri Oct 24, 2008 11:16 am
Location: Perth, WA, Australia
Contact:

Postby Mitsiman » Sat Oct 03, 2009 11:26 am

I don't know why your getting an error. Maybe worthwhile trying to download the rom at the same time as be on the phone with me so that I can run you through it.
For urgent replies to PM's contact via phone

User avatar
blanka
INACTIVE Member Account
Posts: 822
Joined: Wed Sep 03, 2008 9:47 pm
Location: Cairns, QLD, Australia

Postby blanka » Sat Oct 03, 2009 11:36 am

yeh that would be much more better as i would have instructions on wat im doing lolz, but i am pretty much doing wat i think is right, dl openecu, install it on laptop, connect open port cable to install driver, then connect to car, press read rom and turn on ignition then bammmmm it says error
Uchiha Itachi

Image

User avatar
Reviva
INACTIVE Member Account
Posts: 34
Joined: Sat Jul 25, 2009 3:38 am
Location: Sydney, Australia

Postby Reviva » Sat Oct 03, 2009 12:33 pm

sh00tr wrote:hey ofey,

in my lunch break today i sent rrm an email for their version 2 short ram intake for 2.0l cvt... (has any one got one of these? any gd?)im awaiting their reply with a full price shipped...


Yeah i bought one of the v2 sri's off Tadz about a month ago, its got decent low end performance and it actually makes the most beastly sound ever, but only after you hit about 2500 rpm which is good cos you can still drive granpa style :P

btw ofey, don't worry about the pulley for me, I'm getting the LLT one instead :D
Image

User avatar
PYLee
Lancer MASTER
Lancer MASTER
Posts: 1808
Joined: Wed Aug 05, 2009 1:29 am
Location: Melbourne, VIC

Postby PYLee » Thu Oct 08, 2009 12:25 am

someone should step up and get the turbo kit imho :D
Lancer Evolution 10MR

User avatar
blanka
INACTIVE Member Account
Posts: 822
Joined: Wed Sep 03, 2008 9:47 pm
Location: Cairns, QLD, Australia

Postby blanka » Thu Oct 08, 2009 8:30 am

lpy2009 wrote:someone should step up and get the turbo kit imho :D


from where
Uchiha Itachi

Image

User avatar
PYLee
Lancer MASTER
Lancer MASTER
Posts: 1808
Joined: Wed Aug 05, 2009 1:29 am
Location: Melbourne, VIC

Postby PYLee » Thu Oct 08, 2009 10:17 am

from where


from RRM :D

RRM turbo
Lancer Evolution 10MR

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Oct 08, 2009 11:32 am

News just in: A$1 = US$0.90

No better time!!
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
blanka
INACTIVE Member Account
Posts: 822
Joined: Wed Sep 03, 2008 9:47 pm
Location: Cairns, QLD, Australia

Postby blanka » Thu Oct 08, 2009 11:56 am

need to see numbers from rrm's turbo kit first, but yeh the dolla is pretty good atm i herd it might go dollar for dollar with the US so ima wait a bit
Uchiha Itachi

Image


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 24 guests