***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

New member from Adelaide

Please Introduce Yourself Here.

Moderators: Moderators, Senior Moderators

User avatar
Daslama
Lancer ES/EX
Lancer ES/EX
Posts: 118
Joined: Sat Sep 19, 2009 6:53 pm
Location: Adelaide, Australia

Postby Daslama » Sun Sep 20, 2009 12:35 am

yeah from what i can tell by the pictures its an awesome mod! i just hope i can put it all back together!

im thinking of painting the rims and calipers black and red respectively. or is that too ricey and overdone?

any other suggestions for cool mods that will make my RA standout?

User avatar
leevin
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 361
Joined: Sun Feb 08, 2009 10:48 pm
Location: Melbourne, VIC, Australia

Postby leevin » Sun Sep 20, 2009 12:40 am

welcome to the club!
sooo jealous of your sick ride!
Daslama wrote:yeah from what i can tell by the pictures its an awesome mod! i just hope i can put it all back together!

im thinking of painting the rims and calipers black and red respectively. or is that too ricey and overdone?

any other suggestions for cool mods that will make my RA standout?


a few of us have done our rims black, i know me and peanut have and it looks super sweet. have you thought about getting new rims at all?
but my theory is.. should lower your car first! to give it an even more aggressive stance :D
07 CJ VRX BLACK LANCER

User avatar
Daslama
Lancer ES/EX
Lancer ES/EX
Posts: 118
Joined: Sat Sep 19, 2009 6:53 pm
Location: Adelaide, Australia

Postby Daslama » Sun Sep 20, 2009 12:56 am

yeah i thought about getting a set of rims but the poor old budgets a bit tight so i was going to try this option first to see how things panned out! question is should i get them powder coated or just paint them myself?

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Sun Sep 20, 2009 3:11 am

I would suggest getting them powdercoated. The finish is a lot better that paint, and due to how hot your rims can get paint can bubble etc.

If you do decide to paint, make sure you use a high temp paint similar to engine enamel. You can also get a high temp clear coat also.

User avatar
Mizta B
Alumni
Alumni
Posts: 5867
Joined: Sun Dec 21, 2008 8:29 am
Location: Mortdale, NSW, Australia

Postby Mizta B » Sun Sep 20, 2009 3:47 am

I'm with Lzy-eye on this one
Powder coating your rims is the best option
Killer looks,durability and cost effective to boot
:D
Australasian Gerbil Rearers Organisation, Official Re-Seller.
Image
MY09 Rally Red VRX ClubCJ's 1st 4B12 2.4L - CCJ Lifetime Member #0004.
Merlinised....

User avatar
Daslama
Lancer ES/EX
Lancer ES/EX
Posts: 118
Joined: Sat Sep 19, 2009 6:53 pm
Location: Adelaide, Australia

Postby Daslama » Sun Sep 20, 2009 10:35 am

ok well ill ring around Adelaide for some quotes on the powdercoating then! so would i just take my car to them and remove the wheels on site? and im assuming the turn around is a few days.... need to find alternative mode of transport i guess!

User avatar
Lancerlot
INACTIVE Member Account
Posts: 317
Joined: Fri Oct 24, 2008 7:03 pm
Location: Sydney, NSW, Australia

Postby Lancerlot » Sun Sep 20, 2009 6:50 pm

Welcome to our most awesome club.
you will love it!
My Lancer is my Trusty Steed.
Image


Return to “NEW MEMBERS”

Who is online

Users browsing this forum: No registered users and 236 guests