***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

* Mitsubishi OEM Parts for ClubCJ Members *

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Sep 09, 2009 6:59 pm

There are a couple of things that match the description of front lip.

The "fangs" in the front are called Front Air Dams and you get them off X-Factor. check this thread.

The front lip which will then join these 2 air dams are then called a C-Lip. Check this thread.

What is it you're after?

BTW, this thread is just for Mitsubishi OEM parts which you will find listed on the first page.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Wed Sep 09, 2009 7:08 pm

Yeah I meant to mention your lips too Ofey, but assumed (silly) that Jazz meant the vrx airdams. Either way you need them before the other lips will go on :)

Jazz926
INACTIVE Member Account
Posts: 19
Joined: Mon Sep 07, 2009 3:52 pm
Location: Sydney

Postby Jazz926 » Wed Sep 09, 2009 7:27 pm

Hi Ofey,

Sorry about the confusion.

I am after the OEM front and rear air dam's.

But if you don't have the OEM one's, than I guess ill get it from x-factor.

Also, how hard is it to install these air dam's? This may sound silly, but it looks like u can just clip them on or something like that.

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Wed Sep 09, 2009 7:33 pm

Trust me, OEM ones are way too much

You can get a set of front air dams from x-factor for under $200AU shipped and painted

You should expect the mitsu ones to cost you in excess of $500 a piece.

As for installation, i believe 4 holes have to be drilled into the bumper and then cliped and or screwed on. They are made to OEM spec, so virtually either way if you buy the OEM ones or x-factor ones, you will have to drill into your bumper
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Wed Sep 09, 2009 7:38 pm

X-Factor Design are a supplier to Mitsubishi Singapore. They make those and other bits for Mitsubishi themselves. So they are 100% identical to what you can get here at Mitsubishi.

Jazz926
INACTIVE Member Account
Posts: 19
Joined: Mon Sep 07, 2009 3:52 pm
Location: Sydney

Postby Jazz926 » Wed Sep 09, 2009 8:19 pm

tadz0rz wrote:Trust me, OEM ones are way too much

You can get a set of front air dams from x-factor for under $200AU shipped and painted

You should expect the mitsu ones to cost you in excess of $500 a piece.

As for installation, i believe 4 holes have to be drilled into the bumper and then cliped and or screwed on. They are made to OEM spec, so virtually either way if you buy the OEM ones or x-factor ones, you will have to drill into your bumper



Oh, fair enough.

Thanks for that.

Guess that is sorted, and price is damn sweet as well.

However the drilling part is fairly damn scary. I seriously don't trust myself. Might get a panel beater or body shop to install them.

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Wed Sep 09, 2009 8:22 pm

They are not that bad to install... take your time, do one drill at a time. They include markers in the pack. It is pretty easy to do. Just have 2 people, makes it much much easier.

Anyways, we probably should move this discussion to the appropriate section. This is about OEM parts Ofey can order for you :)

Jazz926
INACTIVE Member Account
Posts: 19
Joined: Mon Sep 07, 2009 3:52 pm
Location: Sydney

Postby Jazz926 » Wed Sep 09, 2009 8:33 pm

Yup, I am also interested in those seat covers, that ofey got up on the first page.

But they are sooo damn expensive

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Sep 10, 2009 12:36 pm

In light of the new MY10 models all coming with lids and stuff, I'm working on getting you boys updated.

jj) 8041A040XA HOLDER-FLOOR CONSOLE BOX CUP = A$108.00
Image
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Stalker
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 352
Joined: Wed Apr 15, 2009 2:20 am
Location: Sunshine Coast, QLD, Australia
Contact:

Postby Stalker » Thu Sep 10, 2009 12:53 pm

does that fit the MY08 ES? cause i cant remember if that part of it is shaped differently or not. IIRC some parts of the centre console are
Image

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Sep 10, 2009 1:17 pm

Apparently there is no reason why these shouldn't fit. It's a one for one replacement. Still we cannot be sure right? Look at the shape and look at your own and see if the clips line up.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Stalker
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 352
Joined: Wed Apr 15, 2009 2:20 am
Location: Sunshine Coast, QLD, Australia
Contact:

Postby Stalker » Thu Sep 10, 2009 3:33 pm

i checked mine and yeah i dont think it'll fit cause the MY08 ES consoles are flat all the way to the back, where as in that pic, like the VRX console it sweaps up towards the back
Image

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Sep 10, 2009 3:40 pm

So we'll conclude it'll only fit VR and above cars.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Thu Sep 10, 2009 3:46 pm

However, there will be one for the ES, without the "mound" at the end.

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Thu Sep 10, 2009 3:48 pm

I wouldnt mind one. When I buy one, I will get it shipped straight to get some Carbon Fibre treatment :D


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 2 guests