***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* Custom Username Scuff Plates Pre-Order
Moderator: Senior Moderators
- JazzyB
- Lancer Ralliart
- Posts: 731
- Joined: Thu Feb 12, 2009 2:42 pm
- Location: Melbourne, VIC, Australia
yeah - I was thinking enamel too - just an alternative type of paint really right guys? kinda resiny?
cut right through and stuff like that is an option for custom ones - for a ballpark figure, we make badges for boats which are engraved simillarly, they are $50 and around the size of a rear scuff plate... Our design will hopefully be a little simpler since the badges have a kinda multi-layered edge which takes a while to make etc. but yes, those prices are just a little hopeful I think tadz - see what's involved, different fonts could mean a doubling in price depending on how small the tools are that we'll have to use (smaller tools take longer to cut, more intricate text/designs can take 2-3 times as long as a thick bold lettering)
I'm hoping to get the front two for less than the OEM ones - don't want them to be shabby tho - so... just let me see - not working tomorrow so I might go in and work on these
Thanks for the interest folks - I'll keep u posted!
cut right through and stuff like that is an option for custom ones - for a ballpark figure, we make badges for boats which are engraved simillarly, they are $50 and around the size of a rear scuff plate... Our design will hopefully be a little simpler since the badges have a kinda multi-layered edge which takes a while to make etc. but yes, those prices are just a little hopeful I think tadz - see what's involved, different fonts could mean a doubling in price depending on how small the tools are that we'll have to use (smaller tools take longer to cut, more intricate text/designs can take 2-3 times as long as a thick bold lettering)
I'm hoping to get the front two for less than the OEM ones - don't want them to be shabby tho - so... just let me see - not working tomorrow so I might go in and work on these
Thanks for the interest folks - I'll keep u posted!
- Scott_VRX_Fan
- Lancer VR/GT
- Posts: 212
- Joined: Sat Apr 18, 2009 5:35 pm
- Location: Cranbourne, VIC, Australia
nice work, they looks great.
im not sure about the personal ones myself, but would be very interested in the clubcj ones.
they look quality
im not sure about the personal ones myself, but would be very interested in the clubcj ones.
they look quality
Mods Completed
ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear
Mods To Be Completed
Front Bumper Upgrade
Mods in Development
Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav
ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear
Mods To Be Completed
Front Bumper Upgrade
Mods in Development
Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav
- JazzyB
- Lancer Ralliart
- Posts: 731
- Joined: Thu Feb 12, 2009 2:42 pm
- Location: Melbourne, VIC, Australia
yeah really hope it all works well - I'm thinking that "the cj lancer club" text might be a bit small for my machine tadz... it can only run tools down to a certain size efficiently... but I'm pushing to upgrade the spindle of the machine a little (to a 32-40K RPM spindle ) Basically, the engraving process should take half as long and hopefully will be able to run even finer text etc...
But, at this stage I have limitations... Thick is ok, medium is a maybe... really skinny I just can't do...
gonna talk to the boss man bout these upgrades tomorrow... since it's in the company's interest as well as ours - lol
But, at this stage I have limitations... Thick is ok, medium is a maybe... really skinny I just can't do...
gonna talk to the boss man bout these upgrades tomorrow... since it's in the company's interest as well as ours - lol
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 29 guests