***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Fog Light replacement

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
s21197
Lancer ES/EX
Lancer ES/EX
Posts: 144
Joined: Mon Dec 15, 2008 6:43 am
Location: Surrey, BC, Canada

Fog Light replacement

Postby s21197 » Mon Dec 15, 2008 6:47 am

Just got my lancer and wanted to change out the fog light bulbs for some PIAA Xtreme White plus bulbs. Just wondering if anyone knows how to do this and also whether they can be replaced without taking the plastic thing off the bottom of the car. Im horrible at taking off those clips... always end up breaking them
User avatar
nickbutterz
INACTIVE Member Account
Posts: 248
Joined: Tue Oct 07, 2008 1:36 am
Location: NJ, United States

Postby nickbutterz » Mon Dec 15, 2008 6:57 am

yea it really easy. idk there was a DIY somewhere idk if it was on this site. but uhm all you do is look at the fog light. and then that platic thing around the fog light there are 2 screws i think take those out. then there should be 1 screw on the fog light itself. take that off. then the foglight comes out. take the bulb out the back. put a new bulb in. reasemble. repeat on the other side
Image
User avatar
Ozie
INACTIVE Member Account
Posts: 5445
Joined: Mon Sep 22, 2008 7:00 am
Location: Sydney, NSW, Australia

Postby Ozie » Mon Dec 15, 2008 7:06 am

nickbutterz wrote:yea it really easy. idk there was a DIY somewhere idk if it was on this site. but uhm all you do is look at the fog light. and then that platic thing around the fog light there are 2 screws i think take those out. then there should be 1 screw on the fog light itself. take that off. then the foglight comes out. take the bulb out the back. put a new bulb in. reasemble. repeat on the other side

yep nick very easy! there are 2 screws, but you only undo 1 of them on each side, so be careful because the other screw is for the light adjustment...
User avatar
Phoenix
INACTIVE Member Account
Posts: 426
Joined: Thu Nov 20, 2008 9:34 pm
Location: Parramatta, NSW, Australia
Contact:
Contact Phoenix

Postby Phoenix » Mon Dec 15, 2008 9:02 am

the owners manual has a short guide in it with pics. have a look ;)
Mah Ride: 2006 Hyundai Getz + 08 Lancer Bodykit
User avatar
nickbutterz
INACTIVE Member Account
Posts: 248
Joined: Tue Oct 07, 2008 1:36 am
Location: NJ, United States

Postby nickbutterz » Mon Dec 15, 2008 10:11 am

Ozie wrote:
nickbutterz wrote:yea it really easy. idk there was a DIY somewhere idk if it was on this site. but uhm all you do is look at the fog light. and then that platic thing around the fog light there are 2 screws i think take those out. then there should be 1 screw on the fog light itself. take that off. then the foglight comes out. take the bulb out the back. put a new bulb in. reasemble. repeat on the other side

yep nick very easy! there are 2 screws, but you only undo 1 of them on each side, so be careful because the other screw is for the light adjustment...


im sorry =/ its been a while and i just said it from memory
User avatar
Ozie
INACTIVE Member Account
Posts: 5445
Joined: Mon Sep 22, 2008 7:00 am
Location: Sydney, NSW, Australia

Postby Ozie » Mon Dec 15, 2008 2:16 pm

nickbutterz wrote:
Ozie wrote:
nickbutterz wrote:yea it really easy. idk there was a DIY somewhere idk if it was on this site. but uhm all you do is look at the fog light. and then that platic thing around the fog light there are 2 screws i think take those out. then there should be 1 screw on the fog light itself. take that off. then the foglight comes out. take the bulb out the back. put a new bulb in. reasemble. repeat on the other side

yep nick very easy! there are 2 screws, but you only undo 1 of them on each side, so be careful because the other screw is for the light adjustment...


im sorry =/ its been a while and i just said it from memory


no sweat buddy
Post Reply

Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 50 guests