***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Touch up paint - champagne metallic colour

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
exaltd
Lancer Evolution
Lancer Evolution
Posts: 796
Joined: Thu Aug 06, 2009 12:19 pm
Location: Melbourne, VIC, Australia

Touch up paint - champagne metallic colour

Postby exaltd » Sat Aug 08, 2009 2:37 am

Hi guys,

Just wondering, where can i get some good quality touch up paint that 100% matches the metallic champagne colour i have? And how much will it cost?

After washing my car and stuff i found a couple of spots that were down to exposed metal (don't know how...) around the rear windscreen and boot. Weird huh? :shock:

Also, can anyone help/tell me how to apply those properly to make it look nice? Otherwise i think i'll be doing the shonky Asian job of just using a paintbrush :lol: They are only small little spots btw.

Thanks!

-EXALTD-

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Sat Aug 08, 2009 8:28 am

Have a look on your passenger side door, and get your paint code colour. I think we have a thread on here by josh_emerton who listed all the paint code colours but i cant seem to find it...

Anywway, Hit up your local mitsubishi dealer and go to their spareparts office and you should be able to pick up a small touch up bottle of paint for around $10-$15. Only thing that i dont like about the touch up paint, its a bottle with a brush. Most of the chips on my car are little specs or thin scratches. When touching up mine i usally have to paint a long line of touch up paint then use my fingernail to get rid of the excess touch up paint around the scratch. It would make it so much easier if they just put the touch up paint in a pen or something.

Hope that answers your question =)
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Sat Aug 08, 2009 9:10 am

You can even get these touch-up paints from eBay, I have the same S18 sand beige colour as yours, I bought my paint from eBay at $10, plus $2.5 delivery... not so much for savings but convenience. I live a ways from the dealer...

Agree with Tadzorz, use another implement if you have to, or do what I do and cut the tiniest hole from a piece of paper, align that to your chip and paint with the brush. The paper takes most of the over-wipe....

Good luck (nice colour car mate!)

Tryg

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sat Aug 08, 2009 9:20 am

Also, a nice little tip I learnt from an expert:

Don't paint it all at once. What I mean is the scratch is say 0.5mm deep, but over 3 or 4 coats, build up the thickness of the touch-up paint. So 1 coat, wait a day, next coat wait a day etc

That way you will never notice it.

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Sat Aug 08, 2009 9:21 am

Ah hah! i gotta remember that one adrian, never thought of that!
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Sat Aug 08, 2009 9:42 am

Top call SIR VRX.....

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sat Aug 08, 2009 9:49 am

Don't forget you can also get the official Mitsu touch up paint through me from our site sponsor Preston Motors.

Your color is the cheapest of all the colors:

MZ103101 PAINT-CHAMPAGNE(HA/S18) = (A$8.00)
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Sat Aug 08, 2009 9:53 am

How much for postage on that one, Ofey? I will happily buy another too!

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sat Aug 08, 2009 10:01 am

dunno. I suggest you buy some parts to make it worthwile.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Sat Aug 08, 2009 10:11 am

Yup, I think you're right, may have to be the cherry on top of a bigger cake!

In addition to the topic at hand, you can also have pressure packs made up to the colour code at some good automotive paint suppliers... but because we have a metallic, laying over small areas can look really bad (hence a full door spray is better than a spot repair).

Tryg

User avatar
exaltd
Lancer Evolution
Lancer Evolution
Posts: 796
Joined: Thu Aug 06, 2009 12:19 pm
Location: Melbourne, VIC, Australia

Postby exaltd » Sun Aug 09, 2009 9:37 pm

Thanks all for the advice. I might take you up on that offer ofrey. If it's that cheap, i should be able to get away with doing the job =P.

-EXALTD-


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 60 guests