New Melbourne VRX

tadz0rz · Postby **tadz0rz** » Mon Aug 03, 2009 9:26 pm

ROFL OKAYYYY. It is quite of a big pertrusion...Adrian, have you got like 3 hands or something...

EDIT: AHH dont worry, i see the fluffy pink slippers. Thats you isnt it adrian

SIR-VRX · Postby **SIR-VRX** » Mon Aug 03, 2009 9:27 pm

No, they're not my ugh boots!! LOL They belong to Ash. Betty Boop ones I think LOL

tadz0rz · Postby **tadz0rz** » Mon Aug 03, 2009 9:30 pm

In your favourite colour of course

Having somehting that would pertrude out that far aswell would look hella stupid. Im still in the air about whether or not to go for the side mount...Half the crap on my car is illegal anyway so the more the merrier i say

Ash · Postby **Ash** » Mon Aug 03, 2009 9:32 pm

Adrian don't deny it. I have caught you out wearing my Betty Boop ugh boots before! haha jking!

tadz0rz · Postby **tadz0rz** » Mon Aug 03, 2009 9:34 pm

A HAH! I KNEW IT! Adrian man, you got sprung!

SIR-VRX · Postby **SIR-VRX** » Mon Aug 03, 2009 9:37 pm

For those doubting my choice in footwear, here is another shot, with my shoes in view.

tadz0rz · Postby **tadz0rz** » Mon Aug 03, 2009 9:41 pm

Haha your determined to prove yourself aint you adrian! I SEE YOUR PINK BETTY BOOP FOOT IN THAT PHOTO!

Ash · Postby **Ash** » Mon Aug 03, 2009 9:42 pm

The last shot had ur shoes in view aswell. And you can still see the tip of ur.....ah I mean MY ugh boots haha

tadz0rz · Postby **tadz0rz** » Mon Aug 03, 2009 9:44 pm

Yeah im pretty sure its adrians foot in the pink slipper.

Ash · Postby **Ash** » Mon Aug 03, 2009 9:48 pm

Yeah for shiz! haha..Btw Adrian, can't we just zip tie our number plate 2 the grill, coz I like the blackout in the middle...and it's my car 2 lol

dumb& · Postby **dumb&** » Tue Aug 04, 2009 8:11 am

Don't zip tie it, use a big washer and a screw/bolt with a nut to clamp it there.

JazzyB · Postby **JazzyB** » Tue Aug 04, 2009 8:38 am

Yeah - if u wanna mount it down there what I did was take the 2 threaded metal clips out when u take off the numberplate (this will become more clear as you take it off) and then,
Reach down into the engine bay after taking off that frontmost plastic cover and hold the threaded clips against the inside of the lower-grill while screwing a screw through the numberplate and the grill from the opposite side. These clips sorta "spring" a bit and hold the numberplate on more firmly and securely, this is how I've got mine attached.

Was thinking tho adrian, mounting like this has gotta be illegal too - cos the numberplate's too close to the ground (in the ADR's it says it's gotta be certain distance above the ground)

Yeah - go the RA trim dusk20 ;-)

Best most inexpensive mod... and matte black vinyl on the bumper will make a fair difference, even on a black car - makes it look like it's ALL grill instead of grill with bumper between ;-)

Ozie · Postby **Ozie** » Tue Aug 04, 2009 8:44 am

This is the proper mount that angles it out parrallel with the axle and that is legal.

here is a better pic on a Evo 8 just so you can see the angle.

Dummer · Postby **Dummer** » Tue Aug 04, 2009 9:04 am

Ozie wrote:This is the proper mount that angles it out parrallel with the axle and that is legal.

Would still be illegal. That's still at an angle to the axle.

Additional to the ADRs the NSW VSI states that the number plate must be able to be clearly read at a distance of 20m and 45 degree angle to either side of the vehicle. I doubt you will be able to read that at 20m and 45degrees to the driver's side of the vehicle. And as point out by Adrian the fact it's a protrusion could give some grief...

daveee wrote:Don't zip tie it, use a big washer and a screw/bolt with a nut to clamp it there.

Industrial cable ties FTW

I've got 4 holding my number plate down, it's not going anywhere. BEsides the crooks will have a screw driver but not likely side cutters on them!

SIR-VRX · Postby **SIR-VRX** » Tue Aug 04, 2009 9:09 am

Yeah that Evo X one is no where near parallel with the axle!

I'm sure if any mount like that was legal is Aus, Mitsi Aus would've used it, instead of blocking the 2 additional air ducts to the intercooler... Which, I might add, we are the only country to do that.

New Melbourne VRX

Who is online