*CLOSED* Lowering Springs Group Buy

krz · Postby **krz** » Fri Jul 24, 2009 8:55 am

maybe its just mine, but i noticed the springs are clapping esp the dead coils (progressive design)
i looked it up recently, and its common to prokit. its nothing major tho.
some in other similar club 9glancers ppl had the same case.. but again it can be eliminated.

Aspired · Postby **Aspired** » Fri Jul 24, 2009 9:23 am

Might be the struts/shocks need changing due to the lower springs ???

ofey · Postby **ofey** » Fri Jul 24, 2009 9:55 am

From what I understand, you don't need to change the shocks if you lower less than 2". One reason why I went for Eibach's Pro Kit. I'm simply changing the springs and nothing else.

Someone more aware can elucidate further.

Dummer · Postby **Dummer** » Fri Jul 24, 2009 9:59 am

Ideally the OEM struts aren't the best if you're after performance handling, but they will suffice. King springs have the same if not greater drop than Eibachs and the struts on mine are fine. I would expect them to prematurely fail though compared to a normal height lancer...

krz · Postby **krz** » Fri Jul 24, 2009 10:15 am

Aspired wrote:Might be the struts/shocks need changing due to the lower springs ???

didnt want to discourage you from getting it, and definitely stock strut is enough for prokit. Ryan is right, ideally aftermarket strut would be good for lowered springs than oem, but not lowering more than 2" the struts will not be taking a hard beating.

LZY_EYE · Postby **LZY_EYE** » Mon Jul 27, 2009 5:50 pm

Just wondering if this group buy is going ahead? Would love the invoice dated before the end of July for obvious reasons

ofey · Postby **ofey** » Mon Jul 27, 2009 6:43 pm

Right in view of this, I'll close this tomorrow.

LZY_EYE · Postby **LZY_EYE** » Mon Jul 27, 2009 10:35 pm

ofey wrote:Right in view of this, I'll close this tomorrow.

Thanks Ofey. Looks like I am going to be busy getting stuff installed into my ride very soon

ofey · Postby **ofey** » Tue Jul 28, 2009 11:54 am

Right we have 2 pull outs.

I really need to know how many of those left are committed.

LZY_EYE · Postby **LZY_EYE** » Tue Jul 28, 2009 12:04 pm

I am ready to go.

Aspired · Postby **Aspired** » Tue Jul 28, 2009 2:37 pm

I'm in..

b3n87 · Postby **b3n87** » Tue Jul 28, 2009 6:13 pm

im in !

LZY_EYE · Postby **LZY_EYE** » Tue Jul 28, 2009 10:44 pm

Just wondering if this will go ahead? I have been talking to shadows about some stuff, would love to know how silly I can go with body parts

I have obviously secured funds for this and the EBC stuff and don't want to end up short.

Scott_VRX_Fan · Postby **Scott_VRX_Fan** » Wed Jul 29, 2009 12:28 am

im still keen, but i need a time frame.

ive got the money set aside for them, but if its goign to be a while (i.e. we need x amount of people buying these before we go with an order) im going to use the money elsewhere and will just get a set of springs later on.

ofey · Postby **ofey** » Thu Jul 30, 2009 9:43 am

Just to update,
We have a new Local Distributor MPS Garage @ A$380 delivered.
Min order of 10.
How many of you are going to join the 5 of us below?

VIC: ofey, b3n87, Aspired, Scott_VRX_FAN
NSW: lzy_eye

CLOSED Lowering Springs Group Buy

Who is online