useless bloody mod in my opinion
can only be used on ralliart and evo as far as i know.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Engine start/stop button
Moderators: Moderators, Senior Moderators
Yeah but if you check out the might car mods video.. they just splice some wires in the ignition and they get it to work.. it would make sense with the smart key however, because we don't actually insert the key.. you can buy a aftermarket button for around $30 and just wire it in... or spend the $400 something and have a simple plug and play connection only in ralliarts..
- tadz0rz
- Genius
- Posts: 6955
- Joined: Sun Mar 08, 2009 8:54 pm
- Location: Melbourne, VIC, Australia
- Contact:
The start button in the ralliart installed by mitsu still does the same thing. You cant really get around it. You need to turn the key to the on position and then press the start button. One of the members on here had it, Ral1rt, hes no longer around since he sold his car but i was curious about this when he did it aswell.
Your asking quite alot of the car and the security system to pretty much bypass all the things needed to start the car including bypassing the code on the keys which gets sent from the keys into into the cars computer, also bypassing the steering wheel lock, ACC signal etc.
There is a lot more to it then you think, possible, probably, but worth it, definitly not...
Your asking quite alot of the car and the security system to pretty much bypass all the things needed to start the car including bypassing the code on the keys which gets sent from the keys into into the cars computer, also bypassing the steering wheel lock, ACC signal etc.
There is a lot more to it then you think, possible, probably, but worth it, definitly not...
- driftnut((
- Lancer Evolution
- Posts: 950
- Joined: Sun Oct 11, 2009 12:05 pm
- Location: central coast Australia
I'd be careful if you buy an aftermarket one and dont have to turn a key this could be very easy for your insurance company to "void" your insurance if the car gets stolen
driftnut((.. ClubCJ's first RX TURBO, Merlinised, K&N pod 18" KING wheels, BC coil overs, Alpine/Pioneer system, Short shifter, Cat back system, Evo x turbo system, ralliart injectors & pump
- driftnut((
- Lancer Evolution
- Posts: 950
- Joined: Sun Oct 11, 2009 12:05 pm
- Location: central coast Australia
- HobartLancer09
- Lancer Newbie
- Posts: 68
- Joined: Sat Apr 09, 2011 5:53 pm
- Location: Hobart
Re: Engine start/stop button
Thread revival.
I'm considering getting push button start ha ha
I'm considering getting push button start ha ha
I'm back baby!
Enkei - HKS - Turbosmart - Cosworth- TMW - Defi - DeatschWerks
Enkei - HKS - Turbosmart - Cosworth- TMW - Defi - DeatschWerks
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Re:
HobartLancer09 wrote:This really is pointless if u still have to use a key
I agree, right now in my VRX the key fob stays in my pocked and I just turn the 'key' and away I go.
Guess Mitsubishi didn't want to spend the money to put in a proper keyless push button start, but isn't it available on other models here in AU?
-
- Lancer VR/GT
- Posts: 211
- Joined: Mon Jul 01, 2019 6:07 am
Re: Engine start/stop button
If anyone has a write up on a push button that would be amazing!!
2012 ES Sportback USDM Long Beach, CA. RA Snorkel, K&N Drop-In,Custom 2.25 catback with Flowmaster resonator+jdm 4” muffler, Gutted from rear seats back, Pioneer AVH-211EX+12” compact sub
Who is online
Users browsing this forum: No registered users and 10 guests