***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

VRX wheels on an ES Lancer

Everything Lancer Related + News & Current Affairs.

Moderators: Moderators, Senior Moderators

User avatar
mrlancealot
Lancer Newbie
Lancer Newbie
Posts: 77
Joined: Wed Nov 08, 2017 8:44 am
Location: Sydney

VRX wheels on an ES Lancer

Postby mrlancealot » Wed Sep 12, 2018 9:42 am

I've got an ES and I'm planning on getting a set of VRX wheels.

I've got some concerns:

[*] Are VRX lancer shock/suspensions the same as standard ES shock/suspension
[*] Do I need to change my shock/suspension setup
[*] Has anyone got VRX wheels on a standard ES (without body kit), can I see pics
[*] Do VRX wheels look OK on an ES or do I have to do the body kit upgrade?

The best case scenario for me is that the VRX wheels would "just work".

ie. I don't have to do any shock/suspension updates and that it doesn't look out of place on a non-body kit Lancer.
08 CJ Lancer ES, VR booty, VRX wheels
* Adj Strut Bar
* K&N Air Panel filter

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Re: VRX wheels on an ES Lancer

Postby lancerdarryl » Wed Sep 12, 2018 10:16 am

They bolt straight up. VRXs have a very slightly stiffer spring rate and a stiffer shock absorber. So you can just bolt on the wheels and go.
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"

User avatar
mrlancealot
Lancer Newbie
Lancer Newbie
Posts: 77
Joined: Wed Nov 08, 2017 8:44 am
Location: Sydney

Re: VRX wheels on an ES Lancer

Postby mrlancealot » Wed Sep 12, 2018 11:43 am

Thanks mate. So ideally, I should upgrade the shock/suspension but It should work OK straight up.

Have you seen an ES with VRX wheels? Do they look out of place without at least the side skirts?
08 CJ Lancer ES, VR booty, VRX wheels
* Adj Strut Bar
* K&N Air Panel filter

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Re: VRX wheels on an ES Lancer

Postby lancerdarryl » Wed Sep 12, 2018 12:54 pm

I’ve seen a couple of Lancers without the body kits and VRX wheels and they look fine. It really isn’t necessary to upgrade your suspension but that’s up to you:)
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR

"Don't back off until you hit something"

User avatar
Mystique
Lancer MASTER
Lancer MASTER
Posts: 1729
Joined: Mon Sep 30, 2013 8:28 pm
Location: Launceston, Tasmania, Australia

Re: VRX wheels on an ES Lancer

Postby Mystique » Wed Sep 12, 2018 4:52 pm

Image

I have an LX (which is a model up from the ES) I haven't had any issues with mine. I did swap out for a different set of wheels for a while, but went back to them because they're a lot nicer looking then some after market wheels, they also look amazing when you lower it as well ;)

For example:

Image
Image
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch

Image
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: VRX wheels on an ES Lancer

Postby bumblebee » Wed Sep 12, 2018 5:32 pm

One downside to shoving the VRX wheels under the car is the tyres are a bit more expensive then stock 16s
also be careful with low profile tyres your don't go round corners to fast or it will be an interesting experience
And be aware you can also make the ride feel more harsh then using stock 16s
However if you try them and you don't like them there is always Gumtree

dopey
Lancer ES/EX
Lancer ES/EX
Posts: 113
Joined: Thu Oct 11, 2012 5:10 pm
Location: Victoria

Re: VRX wheels on an ES Lancer

Postby dopey » Wed Sep 12, 2018 7:11 pm

I wondered the same thing a while ago and found this pic on carsales

Image

User avatar
Quismiff
Lancer Legend
Lancer Legend
Posts: 1017
Joined: Wed Apr 12, 2017 8:37 pm
Location: South East Queensland
Contact:

Re: VRX wheels on an ES Lancer

Postby Quismiff » Thu Sep 13, 2018 9:19 am

I think one of the things car manufacturers get wrong is they try and move base model stock by sticking whiz bang bits on it, so you can buy an ES off the lot that looks a lot like the more expensive aspire, I have seen so many of these cars with VR-X kits on 16" wheels...

Kinda takes the desire/want/need to buy the sporty/luxury models out of it...

there is an ES around Lynbrook that is full EVO... Just needs the bonnet. But that one I understand was owner preference.
2007 MY08 VR-X (cj-red)

I'm an eccentric smart-arse whose sarcasm has him perpetually in the s#@!.

User avatar
mrlancealot
Lancer Newbie
Lancer Newbie
Posts: 77
Joined: Wed Nov 08, 2017 8:44 am
Location: Sydney

Re: VRX wheels on an ES Lancer

Postby mrlancealot » Thu Sep 13, 2018 9:54 am

Thanks for the input guys.

@Mystique Thanks for confirming about suspension/ride. That's one less thing to worry about then.

@dopey Thanks for that pic. That's what I was looking for. So while it doesn't make it look worse, it doesn't add anything to the car.

I think I need some side skirts (at least) to go with the wheels.

@bumblebee Thanks for raising the point about the cost. I was aware of it but I was planning to trade some cost for a bit of exhilaration in my life :)

Also, I was going to offset this cost (slightly) by using Kumhos/Falcens instead of Bridgestone/Good Year etc

@Quismiff
you can buy an ES off the lot that looks a lot like the more expensive aspire

Why would you? Wouldn't an Aspire cost less than an ES with all the bells and whistles?
08 CJ Lancer ES, VR booty, VRX wheels
* Adj Strut Bar
* K&N Air Panel filter

User avatar
Quismiff
Lancer Legend
Lancer Legend
Posts: 1017
Joined: Wed Apr 12, 2017 8:37 pm
Location: South East Queensland
Contact:

Re: VRX wheels on an ES Lancer

Postby Quismiff » Thu Sep 13, 2018 12:04 pm

The Aspire was quite a high trim level, leather seats etc, and a 2.4l engine, the ES came with the 2.0l donk and steel wheels with hub caps.

There were so many trim levels for the lancer in the end it was confusing, and now they have the three as they run out, ES, GSR, and LS.

It started as ES, VR, VR-X, then RA, and EVO X, then added LX, Aspire, LS, Platinum, Activ, RX, SX. in no particular order, and I may have missed a couple.

No doubt some will be people wanting their car to look personal, and they're allowed to do that, and some of it will be dealer deals of cheap accessories.

Anyway, this is about as far off topic as we can get, and just a quite rant I usually have about car manufacturers, and dealers. The 18s aren't too bad, can be a little harsh over bumps, but I have the VR-X with the different shocks, if you have softer struts in the ES it may mitigate the cons there. Also getting a different sized tyre like the 225/40R18 can reduce the cost a bit as it is more common than the 215/45R18 that is standard fitment.

225/40R18 RE003 $223ea ex Tyre Sales
215/45R18 RE003 $295ea ex Tyre Sales
2007 MY08 VR-X (cj-red)

I'm an eccentric smart-arse whose sarcasm has him perpetually in the s#@!.

User avatar
ReeceCozaa
Lancer Legend
Lancer Legend
Posts: 1106
Joined: Thu Mar 16, 2017 8:01 pm
Location: Sydney

Re: VRX wheels on an ES Lancer

Postby ReeceCozaa » Thu Sep 13, 2018 1:25 pm

Driving the ES and owning a GSR the wheels defs to abosorb more bumpiness, but nothing I thought was really much of a noticeable difference, would slap the Vrx wheels right on, if you want some scuffed 2016 GSR wheels I’m selling them off xD
We are all in it for the fun!

User avatar
mrlancealot
Lancer Newbie
Lancer Newbie
Posts: 77
Joined: Wed Nov 08, 2017 8:44 am
Location: Sydney

Re: VRX wheels on an ES Lancer

Postby mrlancealot » Thu Sep 13, 2018 1:40 pm

@Quismiff
Based on my understanding about those tyre dimensions, I'm assuming the 225/40R18 is a more lower profile tyre than the 215/45R18.

I'm looking for some middle ground with these new wheels. More fun but not too firm. So I might have too fork out a bit more for a bit more comfort.
225/40R18 RE003 $223ea ex Tyre Sales
215/45R18 RE003 $295ea ex Tyre Sales
08 CJ Lancer ES, VR booty, VRX wheels
* Adj Strut Bar
* K&N Air Panel filter

User avatar
mrlancealot
Lancer Newbie
Lancer Newbie
Posts: 77
Joined: Wed Nov 08, 2017 8:44 am
Location: Sydney

Re: VRX wheels on an ES Lancer

Postby mrlancealot » Thu Sep 13, 2018 1:44 pm

@ReeceCozaa Thanks for the offer. Unfortunately, I'm pretty set on the VRX wheels. I think they complement the Lancer so well.

I'd be interested in anyone else getting rid of (sell) their VRX wheels though :)
08 CJ Lancer ES, VR booty, VRX wheels
* Adj Strut Bar
* K&N Air Panel filter

User avatar
ReeceCozaa
Lancer Legend
Lancer Legend
Posts: 1106
Joined: Thu Mar 16, 2017 8:01 pm
Location: Sydney

Re: VRX wheels on an ES Lancer

Postby ReeceCozaa » Thu Sep 13, 2018 2:29 pm

Not a problem bro! They do suit it very well!
We are all in it for the fun!

User avatar
Quismiff
Lancer Legend
Lancer Legend
Posts: 1017
Joined: Wed Apr 12, 2017 8:37 pm
Location: South East Queensland
Contact:

Re: VRX wheels on an ES Lancer

Postby Quismiff » Thu Sep 13, 2018 2:58 pm

40 is the sidewall as a percentage of the width of the tyre, so 40% of 225 is a 90mm side wall, 45% of 215 is 97mm side wall
more here. You could go upto a 225/45 for a 101mm sidewall.

Somewhere on this forum is a link to a calculator that will tell you how far out it will throw your speedo too.
2007 MY08 VR-X (cj-red)

I'm an eccentric smart-arse whose sarcasm has him perpetually in the s#@!.


Return to “ClubCJ Talk”

Who is online

Users browsing this forum: No registered users and 86 guests