***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

VRX Badge Position

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Patch
Lancer Learner
Lancer Learner
Posts: 18
Joined: Fri Oct 04, 2013 2:10 am
Location: Perth, Australia

VRX Badge Position

Postby Patch » Tue Apr 10, 2018 10:46 pm

Hi all,

Looking for someone with a CJ VRX sedan and a good ruler to get some measurements of where the standard VRX badge is located on the boot. Ideally looking for a car that hasn't had the badges removed or replaced before. There might be something about it in the repair manual but I haven't got a copy.

Looking for;

Image

A - bottom edge of 'V' to bottom edge of boot
B - bottom point of 'X' to bottom edge of boot
C - bottom right point of 'X', straight across to right side of boot
D - top right point of 'X', straight across to right side of boot

Thanks :mrgreen:

User avatar
benyamin
Lancer ES/EX
Lancer ES/EX
Posts: 146
Joined: Sun Feb 11, 2018 9:45 pm
Location: Oz

Re: VRX Badge Position

Postby benyamin » Wed Apr 11, 2018 12:16 am

Hey Patch, I've got a VRX Sportback but it looks like you have the sedan. Mine also most likely has had the badges replaced before.

This might help. Or more specifically this.

The manual I have (MY11) has 38.0mm instead of 44mm, 59.0mm instead of 44.1mm & 40.1mm instead of 42.0 mm. The RALLIART badge is the same, so I presume the VRX one is likely to be too. You might be able to transpose the above sedan dimensions but YMMV.
MY09 VRX one of these: (cj-sb-red)

User avatar
Patch
Lancer Learner
Lancer Learner
Posts: 18
Joined: Fri Oct 04, 2013 2:10 am
Location: Perth, Australia

Re: VRX Badge Position

Postby Patch » Wed Apr 11, 2018 12:47 am

Awesome, that should do the trick! Thanks a lot :D

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Re: VRX Badge Position

Postby aspir3 » Wed Apr 11, 2018 6:36 am

I suggest you contact a Mitsubishi dealer as they will be able to help you with this

User avatar
benyamin
Lancer ES/EX
Lancer ES/EX
Posts: 146
Joined: Sun Feb 11, 2018 9:45 pm
Location: Oz

Re: VRX Badge Position

Postby benyamin » Wed Apr 11, 2018 9:22 am

^ Good advice...!
MY09 VRX one of these: (cj-sb-red)

Mooman
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 340
Joined: Wed Aug 12, 2015 12:29 pm
Location: Melbourne, Australia

Re: VRX Badge Position

Postby Mooman » Wed Apr 11, 2018 11:43 am

Why not go badgeless? It's a common first 'mod' for people, remove model, MIVEC badges on sides and maybe even Lancer badge. Of course not for everyone but something to consider.

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: VRX Badge Position

Postby Lancer1993 » Wed Apr 11, 2018 12:13 pm

Unless you have the base model I never saw the appeal of de-badging my car.
Image
My rides CJ VRX - CC coupe

User avatar
Patch
Lancer Learner
Lancer Learner
Posts: 18
Joined: Fri Oct 04, 2013 2:10 am
Location: Perth, Australia

Re: VRX Badge Position

Postby Patch » Wed Apr 11, 2018 2:58 pm

Car is currently totally badgeless, not totally sold on the look so want to put the Mitsubishi star and VRX badge back on.

Dealership is not being as timely as I'd like them to be so looking for answers here.


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 60 guests