Here's a pic of the bolt up arrangement for mine..
It was definitely installed properly It was rear ended and the tongue of the tow bar bent up and pushed into the exhaust!
I bought the bar second hand - I know it's not a genuine Mitsi bar.
See the 8.8 Bolts.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
DIY Tow Bar Install
Moderators: Moderators, Senior Moderators
Re: DIY Tow Bar Install
Why use relays?
They are electomechanical and eventually fail
Use a plug n play ECU based electronic kit from Aranda towbars
Very inexpensive and extremely reliable
Using relays will also place extra load on the existing wiring
The ecu option from Aranada eliminates this
They are electomechanical and eventually fail
Use a plug n play ECU based electronic kit from Aranda towbars
Very inexpensive and extremely reliable
Using relays will also place extra load on the existing wiring
The ecu option from Aranada eliminates this
4G69 TB viewtopic.php?f=49&t=22125
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Re: DIY Tow Bar Install
Looks pretty simple to bolt on.
Still waiting on a reply from that one on eBay, but I'm in no hurry and with other expenses like my service and new tires this will have to wait until I 100% need it.
Still waiting on a reply from that one on eBay, but I'm in no hurry and with other expenses like my service and new tires this will have to wait until I 100% need it.
Re: DIY Tow Bar Install
I used relays cause I didn't want to wait on a box - and - the relays were selected to be 10mA of draw - easy as, minimal drain.
The transistors would add load to the circuit just around 1/10th of the relay - all insignificant though..
I got the relay box together the same day (saturday).
Why the relay box or the other box? Simple - they don't want the globes of the trailer (500mA + ) of load on the existing circuit - hence why the relay box is just as valid as the transistors.
The transistors would add load to the circuit just around 1/10th of the relay - all insignificant though..
I got the relay box together the same day (saturday).
Why the relay box or the other box? Simple - they don't want the globes of the trailer (500mA + ) of load on the existing circuit - hence why the relay box is just as valid as the transistors.
Who is online
Users browsing this forum: No registered users and 62 guests