***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Interior light not working?
Moderators: Moderators, Senior Moderators
- lachlan.davis
- Lancer Learner
- Posts: 11
- Joined: Mon Oct 30, 2017 11:12 am
Interior light not working?
I've had a quick look and couldn't find anything on this, my interior light doesn't work (09 ES), the bulb was fine but i've put another one in anyway, the fuse was also fine but replaced that too, still no luck. Has anyone else had this issue or am i looking at something like a wire chewed by a mouse? (had that a few years ago with the fuel gauge wire)
- Quismiff
- Lancer Legend
- Posts: 1017
- Joined: Wed Apr 12, 2017 8:37 pm
- Location: South East Queensland
- Contact:
Re: Interior light not working?
Checked all doors have the same problem?
I'm not sure if a faulty switch on one door can stop all working.
I'm not sure if a faulty switch on one door can stop all working.
2007 MY08 VR-X
I'm an eccentric smart-arse whose sarcasm has him perpetually in the s#@!.
I'm an eccentric smart-arse whose sarcasm has him perpetually in the s#@!.
- lachlan.davis
- Lancer Learner
- Posts: 11
- Joined: Mon Oct 30, 2017 11:12 am
Re: Interior light not working?
Doesn't switch on for any of the doors, or even in the ON position either.
Re: Interior light not working?
The bulb you put in.
Is it incandescent or led?
Led usually have polarity protection and if dont work turn it around the other way
Is it incandescent or led?
Led usually have polarity protection and if dont work turn it around the other way
4G69 TB viewtopic.php?f=49&t=22125
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
Re: Interior light not working?
Check that you have power at the light.
The light comes on when earthed either by a door or switch being put in on position.
I suspect you have led in the wrong way or fuse has blown
The light comes on when earthed either by a door or switch being put in on position.
I suspect you have led in the wrong way or fuse has blown
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Re: Interior light not working?
pull out the housing for the lights using a flat head scredriver and a bit of love, check if the connecting cables are all g
also good opt on the polarity^^^ i went through 3 LED bulbs EACH side before it finally dawned on me what was wrong. got the left first try, took me 4 attempts for the right lol
also good opt on the polarity^^^ i went through 3 LED bulbs EACH side before it finally dawned on me what was wrong. got the left first try, took me 4 attempts for the right lol
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
- lachlan.davis
- Lancer Learner
- Posts: 11
- Joined: Mon Oct 30, 2017 11:12 am
Re: Interior light not working?
Derp, flipped the LED around, problem solved Damn new fangled technology, would never have this trouble with a good old fashioned whale oil interior light!
Re: Interior light not working?
Glad you got it sorted
To pop out the light assembly from the roof i avoid using screwdrivers as much as possible.
Use your fingers.
Press the roof liner upwards to expose more of the assembly and pull down on the assembly.
It is held in place with little metal type spring clip dudads. Nothing too tough
To pop out the light assembly from the roof i avoid using screwdrivers as much as possible.
Use your fingers.
Press the roof liner upwards to expose more of the assembly and pull down on the assembly.
It is held in place with little metal type spring clip dudads. Nothing too tough
4G69 TB viewtopic.php?f=49&t=22125
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
Who is online
Users browsing this forum: No registered users and 66 guests