***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Ralliart snorkel profile photos

Servicing, Oil Changes, Fluids & Much More.

Moderators: Moderators, Senior Moderators

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Ralliart snorkel profile photos

Postby bumblebee » Thu Oct 26, 2017 7:15 pm

As per the messages exchanged to day i have taken photos of my RA snorkel. It is wrapped in gold heat reflection tape. And it has also got a "rainbow pen" air scoop glued to the front of the RA snorkel.
I can't remember the glue used.however it is used by tradies to help glue your new house together. This glue is incredibly strong and even though it is glued onto the front of the RA snorkel by about 20mm or less of contact it wont be coming off anytime soon i assure you


https://imgur.com/gallery/GqUBA

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: Ralliart snorkel profile photos

Postby Ronan.Butler11 » Thu Oct 26, 2017 7:29 pm

bumblebee wrote:As per the messages exchanged to day i have taken photos of my RA snorkel. It is wrapped in gold heat reflection tape. And it has also got a "rainbow pen" air scoop glued to the front of the RA snorkel.
I can't remember the glue used.however it is used by tradies to help glue your new house together. This glue is incredibly strong and even though it is glued onto the front of the RA snorkel by about 20mm or less of contact it wont be coming off anytime soon i assure you


https://imgur.com/gallery/GqUBA


Yellow or Green bottle?

i kinda hope you didnt use liquid nails (green), your gonna need a bloody jackhammer if you ever want to get that out lol

probs normal building grade sillicone though (yellow) its called sikaflex and that stuff works, still need a lot of effort to get it out but less than liquid nails

but yeh, looks good man, if gold went with my colour scheme i would do the same lol
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Ralliart snorkel profile photos

Postby bumblebee » Thu Oct 26, 2017 7:57 pm

Yup the yellow stuff it was. Sikaflex. That rings a bell

Colour doesnt bother me a bit
It could be pink with purple polka dots for all i care
I shut the bonnet and forget about it

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: Ralliart snorkel profile photos

Postby Ronan.Butler11 » Thu Oct 26, 2017 8:10 pm

hahaha tru dat. *nek minute it ends up drying to bonnet, can never open again*
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Ralliart snorkel profile photos

Postby bumblebee » Thu Oct 26, 2017 8:19 pm

Lol
Nah man its not glued to the bonnet
We made sure it was set before we closed the bonnet

User avatar
Quismiff
Lancer Legend
Lancer Legend
Posts: 1017
Joined: Wed Apr 12, 2017 8:37 pm
Location: South East Queensland
Contact:

Re: Ralliart snorkel profile photos

Postby Quismiff » Fri Oct 27, 2017 8:21 am

bumblebee wrote:As per the messages exchanged to day i have taken photos of my RA snorkel. It is wrapped in gold heat reflection tape. And it has also got a "rainbow pen" air scoop glued to the front of the RA snorkel.
I can't remember the glue used.however it is used by tradies to help glue your new house together. This glue is incredibly strong and even though it is glued onto the front of the RA snorkel by about 20mm or less of contact it wont be coming off anytime soon i assure you


https://imgur.com/gallery/GqUBA


Thanks heaps for those bumblebee, as suspected it is pretty much a stock intake with a wider mouth, and no noise reduction chamber ( I know it has a proper name ). I have an idea, but it is hindered by the battery... The Magna I had the snorkel was pretty much flat, every bend adds restriction (the closer to 90* the worse it is), and in looking inside mine you can see where the air has been turbulent by the dust marks on the inside. and of course the bonnet support thingy ( technical term y0 ) that runs over the top adds to the fun =) bonnet struts here I come :twisted:

Image
Left
Image
Right ( you can actually see the dimple where the battery retainer peg goes up to )
2007 MY08 VR-X (cj-red)

I'm an eccentric smart-arse whose sarcasm has him perpetually in the s#@!.

User avatar
sarusa
Lancer Legend
Lancer Legend
Posts: 1287
Joined: Fri Sep 04, 2015 3:22 pm
Location: melbourne

Re: Ralliart snorkel profile photos

Postby sarusa » Fri Oct 27, 2017 9:17 am

Looking at the shape of that snorkel, looks like there would be enough room up high between the engine and radiator.
to fit a supercharger. Positioned in good location to the inlet side of things. Hmmm!

Mooman
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 340
Joined: Wed Aug 12, 2015 12:29 pm
Location: Melbourne, Australia

Re: Ralliart snorkel profile photos

Postby Mooman » Fri Oct 27, 2017 10:37 am

Quismiff do a google search for EVO X engine bay and it may have what your after. Airbox is where battery is as battery is in the boot, has a short snorkle and if connected to throttle body would have a short pipe.

Would be interesting to see how that setup sounds with an N/A.

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Ralliart snorkel profile photos

Postby bumblebee » Fri Oct 27, 2017 11:28 am

Im positive i found last year a company in usa selling superchargers for the 4B11 and i have been googling and cant find it now.
Sigh

User avatar
Quismiff
Lancer Legend
Lancer Legend
Posts: 1017
Joined: Wed Apr 12, 2017 8:37 pm
Location: South East Queensland
Contact:

Re: Ralliart snorkel profile photos

Postby Quismiff » Fri Oct 27, 2017 11:45 am

Mooman wrote:Quismiff do a google search for EVO X engine bay and it may have what your after. Airbox is where battery is as battery is in the boot, has a short snorkle and if connected to throttle body would have a short pipe.

Would be interesting to see how that setup sounds with an N/A.


The problem would be with the outlets then, as the EVO X has a trubo, the outlet heads to the rear of the engine, if the NA box fitted the back of the EVO X box, it could possibly be a goer.

I see the Ryco A1622 Panel filter suits both vehicles, it could well do.

Now anyone parting with one for a reasonable price? One in Brisbane on Gumtree going for 2 spot, and one on clubcj for sale back in 2012, don't think it'll still be available =P
2007 MY08 VR-X (cj-red)

I'm an eccentric smart-arse whose sarcasm has him perpetually in the s#@!.

User avatar
sarusa
Lancer Legend
Lancer Legend
Posts: 1287
Joined: Fri Sep 04, 2015 3:22 pm
Location: melbourne

Re: Ralliart snorkel profile photos

Postby sarusa » Sat Oct 28, 2017 7:33 am

bumblebee wrote:Im positive i found last year a company in usa selling superchargers for the 4B11 and i have been googling and cant find it now.
Sigh


Might have been a discussion on electric supercharges which apparently, are useless! :(

User avatar
Quismiff
Lancer Legend
Lancer Legend
Posts: 1017
Joined: Wed Apr 12, 2017 8:37 pm
Location: South East Queensland
Contact:

Re: Ralliart snorkel profile photos

Postby Quismiff » Sat Oct 28, 2017 8:20 am

Reading back through old threads last night, and there is a lot of divided opinion on intakes and early modifications in this thread, but no one has mentioned an EVO X air box in an NA lancer...
2007 MY08 VR-X (cj-red)

I'm an eccentric smart-arse whose sarcasm has him perpetually in the s#@!.

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Ralliart snorkel profile photos

Postby bumblebee » Sat Oct 28, 2017 8:23 am

Electric supercharger are about as handy as fly screen on a submarine.
The lot i saw had a bolt on supercharger kit. They have turbo kits also.


Return to “Maintenance”

Who is online

Users browsing this forum: No registered users and 95 guests