***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Sportback taillights, So close.
Moderators: Moderators, Senior Moderators
- MiracleLancer
- Lancer Newbie
- Posts: 91
- Joined: Wed Apr 19, 2017 4:21 pm
- Location: Sydney
Sportback taillights, So close.
http://www.unnwerke.com/mitsubishi.html
Found these while searching around hoping to get lucky. Got to scroll down a little to see the lights.
Got so close to finding something yet so far.
Found these while searching around hoping to get lucky. Got to scroll down a little to see the lights.
Got so close to finding something yet so far.
CF Lancer GSR 2.4L CVT Sportback
Tenzo-R Cuzco V.1
Tenzo-R Cuzco V.1
Re: Sportback taillights, So close.
There is no way they will adr approved.
The police will defect them very quickly
The police will defect them very quickly
- MiracleLancer
- Lancer Newbie
- Posts: 91
- Joined: Wed Apr 19, 2017 4:21 pm
- Location: Sydney
Re: Sportback taillights, So close.
aspir3 wrote:There is no way they will adr approved.
The police will defect them very quickly
Yeah I was thinking that too, kind of a shame really. Not only that can't really take my car to the US for just lights.
CF Lancer GSR 2.4L CVT Sportback
Tenzo-R Cuzco V.1
Tenzo-R Cuzco V.1
- Quismiff
- Lancer Legend
- Posts: 1017
- Joined: Wed Apr 12, 2017 8:37 pm
- Location: South East Queensland
- Contact:
Re: Sportback taillights, So close.
Using readily available ADR approved LED lights and a bit of fibreglass work you could possibly make yourself a custom set similar, you would need to get it certified of course to keep the trigger happy inspectors calm...
Don't get me wrong, there is a ton of work and money involved, but companies like HELLA and NARVA make Combination lamps and Stop Tail lamps that are all ADR approved, so it isn't impossible, just time consuming, and expensive, but would be a one of a kind sports back Lancer
Don't get me wrong, there is a ton of work and money involved, but companies like HELLA and NARVA make Combination lamps and Stop Tail lamps that are all ADR approved, so it isn't impossible, just time consuming, and expensive, but would be a one of a kind sports back Lancer
2007 MY08 VR-X
I'm an eccentric smart-arse whose sarcasm has him perpetually in the s#@!.
I'm an eccentric smart-arse whose sarcasm has him perpetually in the s#@!.
- MiracleLancer
- Lancer Newbie
- Posts: 91
- Joined: Wed Apr 19, 2017 4:21 pm
- Location: Sydney
Re: Sportback taillights, So close.
Quismiff wrote:Using readily available ADR approved LED lights and a bit of fibreglass work you could possibly make yourself a custom set similar, you would need to get it certified of course to keep the trigger happy inspectors calm...
Don't get me wrong, there is a ton of work and money involved, but companies like HELLA and NARVA make Combination lamps and Stop Tail lamps that are all ADR approved, so it isn't impossible, just time consuming, and expensive, but would be a one of a kind sports back Lancer
If I had the Know how, time and money for it. I definitely would give this a shot.
Would be pretty cool having a One of a kind tail light
CF Lancer GSR 2.4L CVT Sportback
Tenzo-R Cuzco V.1
Tenzo-R Cuzco V.1
- Mystique
- Lancer MASTER
- Posts: 1729
- Joined: Mon Sep 30, 2013 8:28 pm
- Location: Launceston, Tasmania, Australia
Re: Sportback taillights, So close.
A guy in the US made a custom set for his Ralliart hatch. Looked pretty good
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
- Shaun Patterson
- Lancer VRX/GTS
- Posts: 381
- Joined: Fri Sep 05, 2014 9:59 pm
- Location: Rockhampton Australia
Re: Sportback taillights, So close.
Mystique wrote:A guy in the US made a custom set for his Ralliart hatch. Looked pretty good
his name is luke unn
they are one ofs and he isnt ever doing another lot..
i just aquired a sportback tho...
so this is happening...
- Mystique
- Lancer MASTER
- Posts: 1729
- Joined: Mon Sep 30, 2013 8:28 pm
- Location: Launceston, Tasmania, Australia
Re: Sportback taillights, So close.
Yeah I know, unfortunate that they were a one off, but there's plenty you can do with the tail lights in the hatch back if you're creative enough
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
- MiracleLancer
- Lancer Newbie
- Posts: 91
- Joined: Wed Apr 19, 2017 4:21 pm
- Location: Sydney
Re: Sportback taillights, So close.
Shaun Patterson wrote:Mystique wrote:A guy in the US made a custom set for his Ralliart hatch. Looked pretty good
his name is luke unn
they are one ofs and he isnt ever doing another lot..
i just aquired a sportback tho...
so this is happening...
If you make a custom set let me know how ya go.
CF Lancer GSR 2.4L CVT Sportback
Tenzo-R Cuzco V.1
Tenzo-R Cuzco V.1
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Re: Sportback taillights, So close.
Twas thnking,
Anyone retro-adjusted or whatever the word is to their sportback tail lights?
Like you can get the custom halos and stuff for headlights, surely you could get the tail lghts blacked out??
Anyone retro-adjusted or whatever the word is to their sportback tail lights?
Like you can get the custom halos and stuff for headlights, surely you could get the tail lghts blacked out??
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
Re: Sportback taillights, So close.
Ronan.Butler11 wrote:Like you can get the custom halos and stuff for headlights, surely you could get the tail lghts blacked out??
You can blackout any tail light or indicators you wish
Doesn't mean it is legal to do and nor is it either nor does it make anyone elses life behind you easier to see your tail lights and increasing your risk of being in an accident and no doubt when the insurance companies find out your tail lights are blacked out you will be left high and dry.
4G69 TB viewtopic.php?f=49&t=22125
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Re: Sportback taillights, So close.
bumblebee wrote:Ronan.Butler11 wrote:Like you can get the custom halos and stuff for headlights, surely you could get the tail lghts blacked out??
You can blackout any tail light or indicators you wish
Doesn't mean it is legal to do and nor is it either nor does it make anyone elses life behind you easier to see your tail lights and increasing your risk of being in an accident and no doubt when the insurance companies find out your tail lights are blacked out you will be left high and dry.
Not as in nite shades, but getting a retro fitter to adjust the tail lights, eg like led everything, the sequential indicator (like the flowing looking type on golfs) and then blacking out the tail lights from the inside
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
Re: Sportback taillights, So close.
Good luck getting it approved for road use
4G69 TB viewtopic.php?f=49&t=22125
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
E85 4b11 viewtopic.php?f=49&t=22182
P0420 Fix viewtopic.php?f=49&t=22747
4B12 in cam 4b11 viewtopic.php?f=49&t=22218
More projects to come
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Re: Sportback taillights, So close.
bumblebee wrote:Good luck getting it approved for road use
True...
how would you get it approved? Or is it legally impossible?
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
- Quismiff
- Lancer Legend
- Posts: 1017
- Joined: Wed Apr 12, 2017 8:37 pm
- Location: South East Queensland
- Contact:
Re: Sportback taillights, So close.
To get approval it would have to satisfy all the criteria of the ADR (and this is a book about 4 inches thick), and be certified by an engineer or other ADR compliant certifier, and local authorities, all in all a possibly very expensive exercise. Back home custom car builders (mainly hot rod enthusiasts), can do just about anything, but I am pretty sure there is special categories the car needs to be registered under. and as long as it complies with lighting laws and is certified by an LVVTA certifier, you're usually okay with the local constabulary. I don't see why it can not be done, it just may take time finding the right people to talk to who can help with what you're trying to achieve.
2007 MY08 VR-X
I'm an eccentric smart-arse whose sarcasm has him perpetually in the s#@!.
I'm an eccentric smart-arse whose sarcasm has him perpetually in the s#@!.
Who is online
Users browsing this forum: No registered users and 17 guests