***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Getting Closer :D - Opinions so far?
Moderators: Moderators, Senior Moderators
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Getting Closer :D - Opinions so far?
Exhaust - Check
Rims - Check
Plate Lights - Check
Im personally in love with it, yet if any has suggestions i should add to the 'to do' list i'm open to suggestions.
Rims - Check
Plate Lights - Check
Im personally in love with it, yet if any has suggestions i should add to the 'to do' list i'm open to suggestions.
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
- lancerdarryl
- Lancer MASTER
- Posts: 1929
- Joined: Wed Jul 14, 2010 3:10 am
- Location: Newcastle NSW Australia
Re: Getting Closer :D - Opinions so far?
Wheels set it off quite well.
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"
"Don't back off until you hit something"
Re: Getting Closer :D - Opinions so far?
Looking good mate. Just need an RA rear bar now to complete it!
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Re: Getting Closer :D - Opinions so far?
was looking at one,
not sure if the exhaust will fit on the RA slot. looks like the RA has the exhausts closer together than mine
Plus i reckon it looks good stock, once i get the bumper repaired it will look better hahaha
not sure if the exhaust will fit on the RA slot. looks like the RA has the exhausts closer together than mine
Plus i reckon it looks good stock, once i get the bumper repaired it will look better hahaha
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
Re: Getting Closer :D - Opinions so far?
Maybe not, the XForce tips do seem further outboard. That said, a rear bumper with appropriate cut-outs would definitely make the dual exhaust stand out.
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Re: Getting Closer :D - Opinions so far?
yeah, it was the original plan. the current bumper doesn't show the cut out for the stock exhaust much, so leaving it as is looks pretty good
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
Re: Getting Closer :D - Opinions so far?
coil overs
Re: Getting Closer :D - Opinions so far?
Merlin tune.
How much was your cat back? Did you git it yourself or by them?
What have you done inside?
Do you have a full size spare? Thought about a custom boot floor? I made one with the mitsi badge cut through with led strips under. Looks mint!
How much was your cat back? Did you git it yourself or by them?
What have you done inside?
Do you have a full size spare? Thought about a custom boot floor? I made one with the mitsi badge cut through with led strips under. Looks mint!
Merlinised
- Mystique
- Lancer MASTER
- Posts: 1729
- Joined: Mon Sep 30, 2013 8:28 pm
- Location: Launceston, Tasmania, Australia
Re: Getting Closer :D - Opinions so far?
Coilovers would finish it nicely with a RA bar
RA bars on hatchbacks are so pretty! <3
RA bars on hatchbacks are so pretty! <3
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Re: Getting Closer :D - Opinions so far?
Dannn wrote:Merlin tune.
How much was your cat back? Did you git it yourself or by them?
What have you done inside?
Do you have a full size spare? Thought about a custom boot floor? I made one with the mitsi badge cut through with led strips under. Looks mint!
Was a 2.5" axle back for $450 from X Force, put in myself
Inside - led dome lights, hoping to get dash etc done blue or a frost white. Looking for an asx cluster to put in
Was looking at getting a half decent tire to chuck on a stock rims and have a full size spare, havnt got around to it.
Was looking to get a mitsu badge that i could stitch in or something, rather than get a whole new liner. Do you have a contact for who did yours and what specifically it was?
Thanks mate
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Re: Getting Closer :D - Opinions so far?
Mystique wrote:Coilovers would finish it nicely with a RA bar
RA bars on hatchbacks are so pretty! <3
Kicking myself over that, my exhausts are too wide for the RA bumper, would have to get them adjusted, maybe a later project
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
Re: Getting Closer :D - Opinions so far?
I literally printed the mitsi logo (full A4 size) and stenciled it onto ply and cut with jigsaw. Bought some auto carpet felt and wrapped it, got a piece of perspex 30x30 and screwed it on, led stripped it and wired it to the boot light so when you open the boot it turns on.
Merlinised
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Re: Getting Closer :D - Opinions so far?
Does it stick out much? thinkings of using 3mm ply and a blue mitsi logo
If you have a picture could you post it? want to know if im doing it right hahaha
If you have a picture could you post it? want to know if im doing it right hahaha
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
Re: Getting Closer :D - Opinions so far?
Merlinised
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Re: Getting Closer :D - Opinions so far?
Looks sick, might have a look into it. i get free off cuts of timber from work, might grab some ply and have a go. The led looks good as well. is there a specific carpet you need to match the rest of the boot area?
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
Who is online
Users browsing this forum: No registered users and 56 guests