***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Will the OEM DRLs fit my Lancer?
Moderators: Moderators, Senior Moderators
Will the OEM DRLs fit my Lancer?
Hello everyone!
As the title suggests I'm wondering if the OEM DRLs will fit my 2010 Lancer SX? I've been told they won't fit my Lancer but I just want to make sure as I really want DRLs!
Thanks in advance.
As the title suggests I'm wondering if the OEM DRLs will fit my 2010 Lancer SX? I've been told they won't fit my Lancer but I just want to make sure as I really want DRLs!
Thanks in advance.
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
- Metalstrix
- Post Monster
- Posts: 2739
- Joined: Thu Dec 13, 2012 4:16 pm
- Location: Sydney Australia
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
There are a few listings on eBay for the genuine ones depending on your bumper design.
Older CJs
http://www.ebay.com.au/itm/GENUINE-MITS ... Sw~bFWHJJ0
Newer CJs
http://www.ebay.com.au/itm/NEW-GENUINE- ... SwxH1T9WG~
For me I've got fog lights and found these on eBay, which allows me to keep both.
Here is the listing but you'll need some foglights to go with them.
http://www.ebay.com.au/itm/LED-Daytime- ... 43e5483485
Older CJs
http://www.ebay.com.au/itm/GENUINE-MITS ... Sw~bFWHJJ0
Newer CJs
http://www.ebay.com.au/itm/NEW-GENUINE- ... SwxH1T9WG~
For me I've got fog lights and found these on eBay, which allows me to keep both.
Here is the listing but you'll need some foglights to go with them.
http://www.ebay.com.au/itm/LED-Daytime- ... 43e5483485
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
I'd contact them first but don't see why the dealer wouldn't be able to get the same.
Not cheap, ming cost about 1/3 and look good with the fog lights, also I painted the chrome black on mine.
As you probably know there are far cheaper ones on eBay but nothing else that will fit and look the part. That said for not much more there are some replacement head lights that have DRLs built in, and loads of designs to choose from.
Not cheap, ming cost about 1/3 and look good with the fog lights, also I painted the chrome black on mine.
As you probably know there are far cheaper ones on eBay but nothing else that will fit and look the part. That said for not much more there are some replacement head lights that have DRLs built in, and loads of designs to choose from.
He asked about the OEM ones
My friend fitted them on his mums 2010 ES
They work well and dim when the lights are on like DRLs should
I dont think he has issues
My friend fitted them on his mums 2010 ES
They work well and dim when the lights are on like DRLs should
I dont think he has issues
My Build Thread : http://clubcj.net/viewtopic.php?t=14731
ROTM Winner OCTOBER 2015 (Nominated for favourite CJ)
-Australia's first airbagged CJ-
ROTM Winner OCTOBER 2015 (Nominated for favourite CJ)
-Australia's first airbagged CJ-
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Mine also dim with the head lights on, just like the factory ones. I know some say they should go off, which they did on my last car but they were not OEM and could be made to fit any car depending on where you want to mount them.
I wasn't sure if they made the DRLs for older CJs but clearly by the eBay links they do so I'd go see them again or maybe go to an installer, they might be able to get a better price than the dealer.
I wasn't sure if they made the DRLs for older CJs but clearly by the eBay links they do so I'd go see them again or maybe go to an installer, they might be able to get a better price than the dealer.
I know my mate who works at mitsu spare parts quoted me 50 bucks but im not sure if that is his rate or normal price
My Build Thread : http://clubcj.net/viewtopic.php?t=14731
ROTM Winner OCTOBER 2015 (Nominated for favourite CJ)
-Australia's first airbagged CJ-
ROTM Winner OCTOBER 2015 (Nominated for favourite CJ)
-Australia's first airbagged CJ-
Just as a matter of interest, the genuine OEM Lancer DRL's are made/supplied by: ROSTRA Precision Controls Inc
You may be able to contact them for a price since the OEM's MZ350287 seem pretty expensive @ $439.
You may be able to contact them for a price since the OEM's MZ350287 seem pretty expensive @ $439.
Sam .....
Merlinised MIVEC - AspiRe 2.4L
Merlinised MIVEC - AspiRe 2.4L
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
There are guides on YouTube for fitting the OEM ones, depending on your CJ it should be plug in with no wires need cutting.
I agree $400 plus is a bit high when the actual parts would cost a fraction of that but this is a genuine part. For that price it should include then coming to your home and fitting it then detailing your car!
@Damir - Who is this mate, $50 sounds too good to be true?
I agree $400 plus is a bit high when the actual parts would cost a fraction of that but this is a genuine part. For that price it should include then coming to your home and fitting it then detailing your car!
@Damir - Who is this mate, $50 sounds too good to be true?
Hey guys, thanks for all the help and information, I really appreciate it!
Yeah if for any reason I don't decide to purchae the OEM DRLs I'll definitely check these out. They look very nice on your Lancer especially with the chrome painted black!
Is this for the DRLs or the instal quote? If it's for the DRLs why is it so cheap especially for OEM?
Thanks for the info Sam, I'll contact them and see what happens.
Lancer1993 wrote:Id contact them first but dont see why the dealer wouldnt be able to get the same. Not cheap, ming cost about 1/3 and look good with the fog lights, also I painted the chrome black on mine. As you probably know there are far cheaper ones on eBay but nothing else that will fit and look the part. That said for not much more there are some replacement head lights that have DRLs built in, and loads of designs to choose from.
Yeah if for any reason I don't decide to purchae the OEM DRLs I'll definitely check these out. They look very nice on your Lancer especially with the chrome painted black!
Damir wrote:I know my mate who works at mitsu spare parts quoted me 50 bucks but im not sure if that is his rate or normal price
Is this for the DRLs or the instal quote? If it's for the DRLs why is it so cheap especially for OEM?
SAM-24A wrote:Just as a matter of interest, the genuine OEM Lancer DRLs are made/supplied by: [b:86237f7ce2]ROSTRA Precision Controls Inc[/b:86237f7ce2] You may be able to contact them for a price since the OEMs MZ350287 seem pretty expensive @ $439.
Thanks for the info Sam, I'll contact them and see what happens.
Who is online
Users browsing this forum: No registered users and 46 guests