***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

What did you do on your car today?

Start a Topic! Have Your Say & Talk About Anything.

Moderators: Moderators, Senior Moderators

User avatar
wolfeey152
Lancer ES/EX
Lancer ES/EX
Posts: 127
Joined: Thu Jun 04, 2015 7:16 pm
Location: Erskine park,Australia

Postby wolfeey152 » Thu Jul 02, 2015 9:56 am

Today I have been and still am. Stuffing around with my dealership to work out whether they are going to fix the damage they caused to my car at service. I have to get a quote through their paintshop before they even decide what they will do
Pain in the backside and alot of heartbreak first scratch and it wasn't even my fault

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Sun Aug 09, 2015 7:39 pm

This!
Image
Image
My rides CJ VRX - CC coupe

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Fri Aug 28, 2015 4:57 pm

Got some LEDs yesterday...
Image

Got a pack of 4, so 2 spares or some for the number plate?
Best $4.95 I've spent on the CJ!
Image
My rides CJ VRX - CC coupe

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Fri Sep 11, 2015 11:33 am

'New' rego plates!
Image

Finally got the plates off my old Lancer and onto the CJ!
Image
My rides CJ VRX - CC coupe

User avatar
Viking
Lancer VR/GT
Lancer VR/GT
Posts: 230
Joined: Thu Mar 05, 2015 11:32 am
Location: South-East Melbourne

Postby Viking » Fri Sep 11, 2015 2:59 pm

Now you have an excuse for speeding.

"But officer, it's a Boeing 737! Look, it even has the plate to say so."

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Fri Sep 11, 2015 8:57 pm

Had that plate since moving to QLD some 20 years ago.
Image
My rides CJ VRX - CC coupe

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Sun Sep 13, 2015 11:57 am

This...
Image
Image
My rides CJ VRX - CC coupe

User avatar
Mystique
Lancer MASTER
Lancer MASTER
Posts: 1729
Joined: Mon Sep 30, 2013 8:28 pm
Location: Launceston, Tasmania, Australia

Postby Mystique » Sun Sep 13, 2015 5:49 pm

Stickers! (Y) :D

Image
Image
Image
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch

Image
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Sun Sep 13, 2015 5:54 pm

I've got a few more to find a home for. :)
Image
Image
My rides CJ VRX - CC coupe

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Mon Oct 05, 2015 11:16 am

Decided to clean out my boot and check the spare, only to find this mess under the tire.
Image
Had the car almost a year and this is the first time I've taken the spare out, yuck!

Image
Now thats better after a vacuum and wash.

Image
Also noticed just how small the space-saver is for height over the 18" which is marginally smaller than the stock tires on the VRX. Never realized how much lower the car will sit on it, guess it's why they recommend putting the SS on the back even if you have a flat front tire.

And I checked the pressure in the spare, just 13.5 psi, its rated for 60 going by the markings on the tire... guess I'll be filling that up next week along with my fuel! Giver the build date of the tire (4308 - so around the time the car was built) and the fact it looks like its never been used my bet is it hasn't been checked in a long time. Also looking at the mess the wheel well was in I'm betting the dealer didn't even bother cleaning it out.

Yes I know I probably should have checked this out long ago, soon after buying the car.
Image
My rides CJ VRX - CC coupe

ken_angelo
Lancer Newbie
Lancer Newbie
Posts: 33
Joined: Fri Sep 25, 2015 9:40 pm
Location: sydney Australia

Postby ken_angelo » Mon Oct 05, 2015 8:31 pm

paint the side skirt black to see what it would look like on my white lancer....Results not bad at all
Lancer es sports 2015 white FTW =)

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Sat Oct 10, 2015 2:50 pm

Put some more air in the spare, it was down to 13psi but now got it back to 60, will check in a few weeks to make sure its keeping the pressure.
Image
My rides CJ VRX - CC coupe

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Fri Oct 23, 2015 3:34 pm

Image
Image
My rides CJ VRX - CC coupe

User avatar
sarusa
Lancer Legend
Lancer Legend
Posts: 1287
Joined: Fri Sep 04, 2015 3:22 pm
Location: melbourne

Postby sarusa » Sat Oct 24, 2015 8:48 am

Lancer1993 wrote:Put some more air in the spare, it was down to 13psi but now got it back to 60, will check in a few weeks to make sure its keeping the pressure.
Lancer1993 wrote:Put some more air in the spare, it was down to 13psi but now got it back to 60, will check in a few weeks to make sure its keeping the pressure.


Is there a simple hose that can be screwed onto the tire valve on one end and a normal valve on the other end One end attached to the spare in the boot and the other end visible, available and usable to check air pressure without having to move or touch the spare or anything else?

If you can please let me know where one can be obtained.

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Sat Oct 24, 2015 10:12 am

sarusa wrote:If you can please let me know where one can be obtained.


I think I understand what you're talking about and I know some truck tires have a special extension but I don't think spares like this do. As soon as you attach anything to the valve it's gonna start letting air out.

A few reasons they are upside down is a) the bolt holding them in place is a lot shorter and b) you have a little space for the tool bag, although it will easily fit outside the wheel next to the jack.

I do know in my old CC coupe the spare is right way up so why the change in the CJ or is that just how all cars are now?

I'll be looking at changing mine when I do some work on the cars boot space, which I hope I can start in the next few weeks.
Image
My rides CJ VRX - CC coupe


Return to “General Talk”

Who is online

Users browsing this forum: No registered users and 205 guests