***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

2015 Side Mirror Markers fit on older model?

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

User avatar
byzon3
Lancer ES/EX
Lancer ES/EX
Posts: 168
Joined: Wed Oct 31, 2012 11:51 am
Location: Hills District

2015 Side Mirror Markers fit on older model?

Postby byzon3 » Wed Sep 09, 2015 8:28 pm

Hi guys,

Looking to see if anyone has already done this

Have a MY11 and wanting to purchase MY15 Side Mirror Markers that now have the indicator on them?

I have been quoted $800 for the pair for full units, wanting to know if this is a simple connection or not?

I have asked 2 dealers however they don't know there a** from their t****

If there's too much mucking around I wouldn't bother. However I was thinking I already have power mirrors so that half the battle just concerned with how the blinkers would get connected up?

Thanks for your help in advance

User avatar
DVS
Lancer VR/GT
Lancer VR/GT
Posts: 241
Joined: Wed Mar 18, 2009 3:22 pm
Location: Melbourne, VIC, Australia

Postby DVS » Wed Sep 09, 2015 8:53 pm

I have 2015 mirrors on my 2009 VRX, are you replacing the whole mirrors, the mirrors I got were LHD I got them from China and cost me around $350 delivered, maybe dearer now our $ in down, I was lucky to get the correct colour, I did have to mod them for RHD but this ended up being much easier than I expected. I was lucky enough to have the old xfactor mirrors so only had to mod the wiring slightly to make them work, I think if you get the mirrors the wiring will be very close, the 2015 mirrors have 7 wires you will need to see how many you have, but I think you will just need to add a wire for the indicators.
Intolerance will not be tolerated

"Insert rant here "

CJ VR-X SPORTSBACK OWNER

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Wed Sep 09, 2015 9:16 pm

I was wondering the same, but what about them folding either with a new switch or automatically when you lock the car.

I know from past experience putting electric windows and mirrors in my CC Coupe the hardest part was getting the wiring into the doors. So how hard is it to get extra wires through the rubber thing that runs from the door to the body or are there extra unused wires in some models?

FYI I have a MY09 VRX if that makes a difference.

I would so love the mirrors to fold when locking the car, indicators would also be a nice touch. And on that does it mean you can delete the fender ones and get the things off a MY15 Lancer to fill the holes?

Sorry if i hijacked this thread.
Image
My rides CJ VRX - CC coupe

WadesVRX
Lancer Newbie
Lancer Newbie
Posts: 68
Joined: Sun Oct 30, 2011 12:59 pm
Location: Brisbane

Postby WadesVRX » Wed Sep 09, 2015 11:58 pm

The answer is yes you can install the MY14 sports turn indicator side mirrors. I have a friend that has a VRX and he installed the new mirrors to his lancer. And worked with out a problem. He got a local Mitsubishi dealership to install them at first he just got the genuine indicator mirror cover but would not work the only way is to buy a new set of the MY14 mirrors. And mitshubishi dealer ship installed them with out a problem. And also for the older model lancer with the inicator on the side finder. He got the MY14 new side finder vent were the indicator was ariganaly. And it looks like a new 2015 model lancer. I'm planning to do the same with mine in a month or to. Hope this info helps.
Flight Instructor

WadesVRX
Lancer Newbie
Lancer Newbie
Posts: 68
Joined: Sun Oct 30, 2011 12:59 pm
Location: Brisbane

Postby WadesVRX » Thu Sep 10, 2015 12:02 am

If you need more advise send me
An email. :)
Flight Instructor

User avatar
squala
Post Monster
Post Monster
Posts: 2869
Joined: Wed Jun 03, 2009 12:23 am
Location: Fines City, VIC, Australia

Postby squala » Thu Sep 10, 2015 12:02 pm

When I looked closely, the MY14 mirrors with the indicators have a different shape compared to the older ones, so I doubt that it's a simple swap of covers and wiring the lights.
///// /////
7 airbags
6-speed SST
5-star safety
4-wheel drive
3-diamond badge
2 overhead cams
1 awesome ride
0 demerit points and gutter rash


Image

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Thu Sep 10, 2015 7:03 pm

WadesVRX wrote:The answer is yes you can install the MY14 sports turn indicator side mirrors. I have a friend that has a VRX and he installed the new mirrors to his lancer. And worked with out a problem. He got a local Mitsubishi dealership to install them at first he just got the genuine indicator mirror cover but would not work the only way is to buy a new set of the MY14 mirrors. And mitshubishi dealer ship installed them with out a problem. And also for the older model lancer with the inicator on the side finder. He got the MY14 new side finder vent were the indicator was ariganaly. And it looks like a new 2015 model lancer. Im planning to do the same with mine in a month or to. Hope this info helps.


So the wiring is all in place or an easy mod?

Also do they fold?
My 09 VRX doesn't have a folding switch on the mirror adjustment, guess I'd need one to manually fold them?

I know buying new 2014 mirrors from Mitsy is not gonna be a cheap upgrade but well worth it if you can find some at the wreckers from an unlucky 2014 owner.
Image
My rides CJ VRX - CC coupe

User avatar
byzon3
Lancer ES/EX
Lancer ES/EX
Posts: 168
Joined: Wed Oct 31, 2012 11:51 am
Location: Hills District

Postby byzon3 » Thu Sep 10, 2015 9:40 pm

ok thanks for input guys

I'm just going to buy them off the dealer and get them to install them

and hope for the best :wink:

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Thu Sep 10, 2015 10:20 pm

Installing should be easy if there is no rewiring to do, even if you need to replace the switch it shouldn't take more than an hour and a few basic tools.

I'm now tempted to ask my dealer about it and see just how much the factory new ones cost.
Image
My rides CJ VRX - CC coupe

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Fri Sep 11, 2015 4:11 pm

Went to my local Mitsy dealer and asked them, but they can't comment if it would work and the guy at the parts counter probably didn't know and without a valid VIN from a new CJ I can't even check the price of the mirrors.
Image
My rides CJ VRX - CC coupe

User avatar
byzon3
Lancer ES/EX
Lancer ES/EX
Posts: 168
Joined: Wed Oct 31, 2012 11:51 am
Location: Hills District

Postby byzon3 » Sat Sep 12, 2015 10:35 pm

As now all dealers ask for VIN - I just go online for new car sales and pull VIN numbers from there :)

I was quoted $800 for the pair at Pennant Hills which is handy but dam.... that Service Manager or what ever he is(main guy when you drop your car in for service who does the paperwork) an absolute PIA and sometimes wants to make me buy another brand of car so I don't have to deal with him

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Sat Sep 12, 2015 11:25 pm

Buy a new car when the first service comes up... might be easier to just go to the next closest dealer.

Got an app on my phone so I can take any QLD rego and find the VIN, comes in handy for things like this.

$800 is a bit pricey, rather put that towards a new HU or EVO rear. Might wait and see if any come up at the wreckers. Once we can confirm 100% that it's basically a plug in and play upgrade, not wires to cut or add and just the mirrors and switch to change.
Image
My rides CJ VRX - CC coupe

User avatar
DVS
Lancer VR/GT
Lancer VR/GT
Posts: 241
Joined: Wed Mar 18, 2009 3:22 pm
Location: Melbourne, VIC, Australia

Postby DVS » Sat Sep 12, 2015 11:43 pm

If your car has floding mirrors now it should just be plug and play, when I put them in my 2009 VRX the plugs were the same, I just had to wire in the folding to the mirrors as mine didn't come with folding mirrors.

and if anyone needs a folding switch I have a spare I got with my mirrors but I already had one.

I got my mirrors from rainbowpen I paid USD 253 delivered around AU $350
only problem they are LHD but were a simple mod to fix to RHD

https://www.facebook.com/Rainbowpen-China-Taiwan-373527749504284/timeline/?ref=br_tf

Photo of mirror I got

https://www.facebook.com/255496151202745/photos/a.694336717318684.1073742017.255496151202745/706826239403065/?type=3&theater

more photos

https://www.facebook.com/media/set/?set=a.694336717318684.1073742017.255496151202745&type=3
Intolerance will not be tolerated



"Insert rant here "



CJ VR-X SPORTSBACK OWNER

WadesVRX
Lancer Newbie
Lancer Newbie
Posts: 68
Joined: Sun Oct 30, 2011 12:59 pm
Location: Brisbane

Postby WadesVRX » Sun Sep 13, 2015 10:33 am

Are them mirrors the same as the genuine lancer mirrors if they I might buy the same onces.
Flight Instructor

User avatar
DVS
Lancer VR/GT
Lancer VR/GT
Posts: 241
Joined: Wed Mar 18, 2009 3:22 pm
Location: Melbourne, VIC, Australia

Postby DVS » Sun Sep 13, 2015 10:58 am

as far as I can tell YES, they are very well made and I did compare them to a genuine set before I got them and I can't tell the difference, but as I said it does require a Mod to make them RHD but I can give you a heads up on that.
Intolerance will not be tolerated



"Insert rant here "



CJ VR-X SPORTSBACK OWNER


Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 58 guests