I just got the factory reverse sensors installed on my 2015 ES Sport CVT Sedan. They were ordered with the car but were on backorder.
Anyway they were fitted today and on collection I noticed there was no button to turn them off.
The MM website says:
http://www.mitsubishi-motors.com.au/veh ... ccessories
"A very useful feature when reversing. A series of audible beeps indicate how close the vehicle is to an object, assisting you to judge the distance of your Lancer to obstacles when reversing or parking. The sensors integrate perfectly into the Lancer’s rear bumper and can be disabled when towing by turning off at the warning buzzer. Note: Not compatible on sedan with rear bumper airdam. *Available Sedan or Sportback"
Which to me means there is a switch to mute it.
I was a bit suspicious that I had had some generic ones fitted because most generic ones don't have the disable switch (one of the reasons I bought the genuine set).
Anyway the dealer assures me that no I have a genuine kit and they don't come with a switch. Which annoys me, because that's why I paid $600 for the genuine vs. $300 for aftermarket. Product delivered doesn't match the advert.
Anyone else with genuine accessory sensors - do you have a switch?
The dealer told me the factory towbar kit comes with the switch. However the description on the genuine accessory doesn't say this, and I'm a bit annoyed because I'm not buying the genuine towbar kit as its $900 fitted and I can get it for $450 fitted aftermarket.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Genuine accesory reverse sensors - who has them?
Moderators: Moderators, Senior Moderators
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
My other cars (2010 Pajero diesel, 2015 Liberty 3.6R) have both sensors and camera.
Faced with having only one, I'd pick sensors. Reason being is that you are looking at the mirrors / over the shoulder and using the beeps as a confirmation tool. Cameras tend to encourage just looking at the camera, meaning you lose sightlines up the sides of the vehicle.
I had a loan car a while ago which had surround cameras. That was interesting when parking.
Faced with having only one, I'd pick sensors. Reason being is that you are looking at the mirrors / over the shoulder and using the beeps as a confirmation tool. Cameras tend to encourage just looking at the camera, meaning you lose sightlines up the sides of the vehicle.
I had a loan car a while ago which had surround cameras. That was interesting when parking.
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Okay I can see that, had one guy back into us a while back (no my CJ, Pathfinder with bullbar) he blamed the camera being dirty, didn't cause any damage.
That all said when I have the money I'll be getting a HU with camera hook up and sensors... and a switch on the dash LOL
I'd say check with another dealer.
That all said when I have the money I'll be getting a HU with camera hook up and sensors... and a switch on the dash LOL
I'd say check with another dealer.
- ashleymorris
- Lancer VRX/GTS
- Posts: 393
- Joined: Thu Sep 12, 2013 10:22 am
- Location: Melbourne
That pic is for sst models only. On all other cars it's on the right next to the boy ricer switch (traction control ). I bought a genuine kit off ebay for $150 and it doesn't come with a switch so got one off ebay for $20. I haven't installed them yet so don't know how the wiring is going to work out.
EOI. 2008 MY09 VRX Front bumper complete. Foggies, pods, grille, badge.
-
- Lancer Evolution
- Posts: 824
- Joined: Mon Feb 14, 2011 3:58 pm
- Location: Adelaide
-
- Lancer Evolution
- Posts: 824
- Joined: Mon Feb 14, 2011 3:58 pm
- Location: Adelaide
Berek wrote:Just checked the parts list and a switch isnt listed.
Thanks. So the dealer is telling the truth - its the MM website that is wrong.
himynameisdaniel wrote:2010 Activ Model reporting in. mine came as part of the new vehicle. but there is no switch in the cabin. I always imagined there would be an option for it on the circuit board but never needed to do this.
Tnanks, that confirms the above too.
So I'll take it up with MM as to why they state something on the webpage but its not correct.
Well no thanks to the useless dealer, I have found that the MM website is actually correct and there is an off switch for the sensors. MM customer care clarified it for me ...
They install a small speaker in the boot space (its up in the top corner, hard to see unless you know) as part of the kit. The small speaker has off-lo-hi settings (for volume). This is all in the instructions for the installation of the sensors, which the dealer didn't give to me.
They install a small speaker in the boot space (its up in the top corner, hard to see unless you know) as part of the kit. The small speaker has off-lo-hi settings (for volume). This is all in the instructions for the installation of the sensors, which the dealer didn't give to me.
-
- Lancer Evolution
- Posts: 824
- Joined: Mon Feb 14, 2011 3:58 pm
- Location: Adelaide
Who is online
Users browsing this forum: No registered users and 69 guests