***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Making scuff plates stick

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
wolfeey152
Lancer ES/EX
Lancer ES/EX
Posts: 127
Joined: Thu Jun 04, 2015 7:16 pm
Location: Erskine park,Australia

Making scuff plates stick

Postby wolfeey152 » Sun Jun 28, 2015 11:00 pm

Sorry did a search and couldn't find anything
I made a horrific discovery after having my car in for a service
Found a scratch in the driver door sill and it's deep
Dealer denied anything saying they are careful and they couldn't have
So I bought a set of scuff plates from chromemycar
Suggestions on applying the double sided tape for best results as normally my attempts fall off
Any recommendations. Paint is new as it's a new car but I think there's wax on the paint

Thanks guys it's my first scratch on my brand new lancer and it's kind of heartbreaking

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Mon Jun 29, 2015 6:02 am

Maybe try some wax and grease remover?

Sorry to hear about the scratches, the previous owner of my VRX had left some in the drivers sill around the tire plate, more like dents, not sure how you'd even do that?

edited - spelling at 5am is not my best LOL
Image
My rides CJ VRX - CC coupe

User avatar
wolfeey152
Lancer ES/EX
Lancer ES/EX
Posts: 127
Joined: Thu Jun 04, 2015 7:16 pm
Location: Erskine park,Australia

Postby wolfeey152 » Mon Jun 29, 2015 8:09 am

Haha the spelling at 5am the pain is real.

Alright yeah I'll give that a shot maybe best i do just the length of the plates

What about that 3m stuff which is supposed to prepare the surface?

trangoEiger
Lancer Newbie
Lancer Newbie
Posts: 24
Joined: Fri May 15, 2015 10:00 am
Location: Darwin, Australia

Postby trangoEiger » Tue Jun 30, 2015 3:43 pm

Normally with 3M or similar double-sided tape, it's best if you warm them up first using a heat gun or a hair dryer (heat gun works better) before installing them. Check the leveling of the plate to tape to surface - should all be in good contact and alignment. And yes, remove the wax first.
Image

User avatar
wolfeey152
Lancer ES/EX
Lancer ES/EX
Posts: 127
Joined: Thu Jun 04, 2015 7:16 pm
Location: Erskine park,Australia

Postby wolfeey152 » Tue Jun 30, 2015 3:50 pm

Alright cool. Will give that a shot. Dealer still insisting they didn't do it. They want me to take car down Thursday to get a quote on repairs before they even decide to fix it. And they can't do it at times Im available. I cant exactly tell how deep the scratch is. But should I bother with touch up paint or some sort of repair to the paint prior to applying the scuff plates?

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Tue Sep 08, 2015 3:55 pm

I had problems sticking LEDs in the boot of my old car, turned out there was wax or something, some grease & wax remover fixed it.
Image
My rides CJ VRX - CC coupe

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Making scuff plates stick

Postby bumblebee » Sat Jun 24, 2017 9:38 pm

Goto bunnings and buy the heavy duty double sided tape. You can use it to stick stuff to concrete walls its that good. And its reasonably inexpensive to buy. Works a treat

User avatar
sarusa
Lancer Legend
Lancer Legend
Posts: 1287
Joined: Fri Sep 04, 2015 3:22 pm
Location: melbourne

Re: Making scuff plates stick

Postby sarusa » Sun Jun 25, 2017 9:56 am

Should always make sure surface is free of debris especially polish, wax etc:. Metho: will usually give you an acceptable surface.

Item you couldn't stick will need new double sided tape. Bit of warmth from a hair drier can help bonding.

User avatar
adamhumphrey
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 481
Joined: Fri Jan 01, 2016 11:31 am
Location: Rutherford NSW, Australia

Re: Making scuff plates stick

Postby adamhumphrey » Sun Jun 25, 2017 7:32 pm

wolfeey152 wrote:Sorry did a search and couldn't find anything
I made a horrific discovery after having my car in for a service
Found a scratch in the driver door sill and it's deep
Dealer denied anything saying they are careful and they couldn't have
So I bought a set of scuff plates from chromemycar
Suggestions on applying the double sided tape for best results as normally my attempts fall off
Any recommendations. Paint is new as it's a new car but I think there's wax on the paint

Thanks guys it's my first scratch on my brand new lancer and it's kind of heartbreaking


I know how you feel I have a nice dent in my scuff plate (Evolution ones) after a service didn't bother saying anything sucks a lot.
Image
MY11 Evo X MR (2011-Current)
MY20 Asx GSR (2023-Current)

MY11 Peugoet 207 XT HDi (2020-Mar 2023)
MY09 Lancer Sportback VRX (2015-2019) - Sold Nov 2019
Owner Operator: - Adam's Attention to Detail. Mobile Detailing and Automotive Installations.
https://www.facebook.com/AdamsAttentionToDetail/


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 79 guests