So my new tail lights from mars arrived today; http://marsperformance.com.au/Smoked-LE ... n-07-15-KS.
However I ran into a bit of trouble with the pair that sits on the boot. The reverse lights work fine, no issues here. Although when I plug the power source for the LED's into the stock bulb harness and run it through to the car it will not work with the brakes. Thinking I've done something wrong, I tested it with the normal stock bulbs, these are now not getting any power either, tested with a voltmeter, still nothing. Brake lights on the side of the rear end are working fine, so is the middle brake light under the boot lip.
(The green plug is where my woes lie.)
They gave me two volt resistors (I think their called), not too sure where to splice these into either, the wires coming out of the A/M lights or the main power wires before the bulb's housing?
Any ideas on what could be causing this?
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Appears no power is running to the boot tail lights. Help?
Moderators: Moderators, Senior Moderators
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Who is online
Users browsing this forum: No registered users and 61 guests