***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
New member - Freakynami from Adelaide
Moderators: Moderators, Senior Moderators
-
- Lancer Learner
- Posts: 10
- Joined: Sun Jul 06, 2014 10:13 pm
- Location: Adelaide, Australia
New member - Freakynami from Adelaide
Real first name: André
Location: Adelaide (North East)
Model: Nothing yet, looking at buying a 4B11 (and yes, I do mean the engine only)
Colour: Black of course
General interests: Building and designing
Current mods: None
Planned mods: Future upgrade to 4B11T
How you found out about ClubCJ: Goooooogle
..anything else you want to entertain us with: Here for information about the 4B11 and CVT. Considering using it in a kit car, the forums are always the best place to find great information
Location: Adelaide (North East)
Model: Nothing yet, looking at buying a 4B11 (and yes, I do mean the engine only)
Colour: Black of course
General interests: Building and designing
Current mods: None
Planned mods: Future upgrade to 4B11T
How you found out about ClubCJ: Goooooogle
..anything else you want to entertain us with: Here for information about the 4B11 and CVT. Considering using it in a kit car, the forums are always the best place to find great information
,
always good to see another Adelaide member
always good to see another Adelaide member
My EVO (X MR) progress: http://clubcj.net/viewtopic.php?p=328713#328713
4 cylinders, 3 diamonds, 2 litre, 1 turbo, 0 reasons to buy anything else
ROTM WINNER SEPT 2014
4 cylinders, 3 diamonds, 2 litre, 1 turbo, 0 reasons to buy anything else
ROTM WINNER SEPT 2014
the engines are fairly good. easy to work on and cheap. if your looking into putting a turbo on the standard 4B11, i wouldnt bother. they dont have forged internals and run a compression ratio of 10:1 so anything more than 5-6 PSI seems to snap rods and slice the block open. better off getting the 4B11t out of a ralliart or evo if you want to turbo.
as for the CVT, its a good transmission providing you look after it, very quick off the mark. the down side to them is i would not run too much power through them as they will slip and die. they also lose about 15-20% of the engines power from the flywheel to the drive shafts.
as for the CVT, its a good transmission providing you look after it, very quick off the mark. the down side to them is i would not run too much power through them as they will slip and die. they also lose about 15-20% of the engines power from the flywheel to the drive shafts.
Injen Cold Air Intake/K&N Invert Pod/BC BR Coilovers/Whiteline Strut Brace/DrIft Blade seats/Penrite HPR5/Penrite ProGear/PBR Gold Dot
-
- Lancer Learner
- Posts: 10
- Joined: Sun Jul 06, 2014 10:13 pm
- Location: Adelaide, Australia
Thanks for the warm welcome
Thanks for the info Kalum, I had begun to get that impression thanks to this forum I gather that it is not just "add a turbo", I would imagine that once I get the kit car on the road and running, I could look at doing a complete conversion to an appropriate engine / trans combination - down the track.
I've been really impressed by the amount of information available on the 4B11, and it is sounding more promising than I originally thought
Good to hear some feedback on the CVT too! I haven't driven one at all, need to do a dealer test drive soon to get a seat of the pants feel for it.
Thanks for the info Kalum, I had begun to get that impression thanks to this forum I gather that it is not just "add a turbo", I would imagine that once I get the kit car on the road and running, I could look at doing a complete conversion to an appropriate engine / trans combination - down the track.
I've been really impressed by the amount of information available on the 4B11, and it is sounding more promising than I originally thought
Good to hear some feedback on the CVT too! I haven't driven one at all, need to do a dealer test drive soon to get a seat of the pants feel for it.
- kay christensen
- Post Monster
- Posts: 3203
- Joined: Mon Mar 18, 2013 9:21 pm
- Location: Adelaide South Australia
- Metalstrix
- Post Monster
- Posts: 2739
- Joined: Thu Dec 13, 2012 4:16 pm
- Location: Sydney Australia
- blinklight
- Lancer Evolution
- Posts: 916
- Joined: Sat Apr 21, 2012 9:26 pm
- Location: Adelaide
welcome , if u were intrested in the CVT go the 4B11 .... other wise as u are aware if you go the 4B11T u will be looking at a SST trans unless ur get an engine out of a Base model GSR evo x as a manual ??? depends on the transmission , personally i wouldnt turbo a CVT transmission
1998 MR lancer
2009 CJ lancer sportback
2011 Renault Sport RS250 Trophee Cup
2000 Tommi Makenin Evolution 6.5
2009 CJ lancer sportback
2011 Renault Sport RS250 Trophee Cup
2000 Tommi Makenin Evolution 6.5
- lantourismo
- Lancer Legend
- Posts: 1248
- Joined: Sat Apr 13, 2013 8:32 pm
- Location: Perth, Australia
- lantourismo
- Lancer Legend
- Posts: 1248
- Joined: Sat Apr 13, 2013 8:32 pm
- Location: Perth, Australia
SIX wrote:welcome , if u were intrested in the CVT go the 4B11 .... other wise as u are aware if you go the 4B11T u will be looking at a SST trans unless ur get an engine out of a Base model GSR evo x as a manual ??? depends on the transmission , personally i wouldnt turbo a CVT transmission
The cvt has power limitations
Who is online
Users browsing this forum: No registered users and 204 guests