***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

*CLOSED* Lowering Springs Group Buy

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
Cottonfoot
Lancer ES/EX
Lancer ES/EX
Posts: 151
Joined: Mon Mar 16, 2009 6:18 pm
Location: Brisbane, QLD, Australia

Postby Cottonfoot » Sat Jun 06, 2009 5:34 pm

daveee wrote:From my experience with lowering springs on our cars is they are not very good. Our airdams are at awkward positions which means they scrape very very easily. I'm considering putting the stock springs back in while I wait for coilovers.


Your not happy with your Kings?

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sat Jun 06, 2009 8:54 pm

In asnwer to daveee,

I chose the

2008+ Mitsubishi Lancer Eibach Pro-Kit Lowering Springs
1.2" Front drop
0.8" Rear drop

vs

2008+ Mitsubishi Lancer Tein S-Tech Lowering Springs
2.1" Front drop
1.9" Rear Drop

So if we're already having a problem with lowering, I didn't want the ones with the most massive drops.

I would also say I agree that coil overs would be the best way to go but the pricing is a different league:
Eibach Springs: A$490 delivered + A$200 install + A$55 alignment = A$745.00
Coilovers = A$1,000+ to begin with for the part?

I suspect I can get away with the Eibach Pro Kit without too much scraping... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sat Jun 06, 2009 11:31 pm

I am looking for this car to take me 5 years. 1 year down so far, 4 more to go so coilovers may be abit of any overkill for me then.

I don't see myself making it big on the financial front and with the need to start a family, funds will be needed elsewhere so I can conservatively hope to be in a position to buy the next Olympic Edition Lancer in 3 years time as an update en route to Evo11 or Evo12. Provided Mitsu survive till then.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
b3n87
Lancer VR/GT
Lancer VR/GT
Posts: 238
Joined: Sun Jan 25, 2009 1:33 pm
Location: Melbourne, VIC, Australia

Postby b3n87 » Tue Jun 09, 2009 5:51 pm

im still keen........

User avatar
krz
Alumni
Alumni
Posts: 445
Joined: Mon Jan 12, 2009 10:13 pm
Location: Sydney, NSW, Australia

Postby krz » Fri Jun 12, 2009 10:39 am

I'm so in.. im sick of my temp lowered spring (reset).. ride height is way too uncomfortable..
when can we order? Eibach Pro-Kit !!
Image

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Jun 12, 2009 10:55 am

Following the delivery of the GReddy exhausts, the same dealer would like to discuss a deal for the eibachs. Same problem we come back to. If we buy from the US, we pay around A$350 each (group shipped). However, there's no warranty.

If we buy local, it's A$490 delivered to your own place and warranty is in tack.

We still can't work out which one is worthwhile. I'm tending towards the local purchase.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
krz
Alumni
Alumni
Posts: 445
Joined: Mon Jan 12, 2009 10:13 pm
Location: Sydney, NSW, Australia

Postby krz » Fri Jun 12, 2009 11:19 am

i was more leaning to local purchase.
$490 is a is still without a doubt a very good price!
Plus delivered to your own place! :)
Image

User avatar
Josh_Emerton
Lancer MASTER
Lancer MASTER
Posts: 1920
Joined: Fri Oct 17, 2008 10:49 pm
Location: Cairns, QLD, Australia

Postby Josh_Emerton » Fri Jun 12, 2009 12:50 pm

I'm just wondering - would it be better to lower the back more than the front? coz our rear end is kinda high...
Image

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Jun 12, 2009 1:03 pm

Josh_Emerton wrote:I'm just wondering - would it be better to lower the back more than the front? coz our rear end is kinda high...


Yeah, Ryan_C could be the one to explain this. Why are these lowering springs done this way where the back is less than the front?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
krz
Alumni
Alumni
Posts: 445
Joined: Mon Jan 12, 2009 10:13 pm
Location: Sydney, NSW, Australia

Postby krz » Fri Jun 12, 2009 1:04 pm

yay, how many ppl required for the $490 deal?
Image

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Jun 12, 2009 1:13 pm

krz wrote:yay, how many ppl required for the $490 deal?

Same as most of our other deals >5.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
krz
Alumni
Alumni
Posts: 445
Joined: Mon Jan 12, 2009 10:13 pm
Location: Sydney, NSW, Australia

Postby krz » Fri Jun 12, 2009 1:16 pm

i see.. hmmm.. this may take a while then..
worth the wait!
Image

User avatar
leevin
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 361
Joined: Sun Feb 08, 2009 10:48 pm
Location: Melbourne, VIC, Australia

Postby leevin » Fri Jun 12, 2009 1:31 pm

are the local distributors doing the eibach sportline kit too? its about the same drop as the tein s techs.
07 CJ VRX BLACK LANCER

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Jun 12, 2009 1:57 pm

*Expressions Of Interest*:

2008+ Mitsubishi Lancer Eibach Pro-Kit Lowering Springs
1.2" Front drop
0.8" Rear drop

Local Distributor (i.e. Eibach Australia) A$490.00 (Shipped)- ofey, krz
Overseas Dealer ~A$350.00 (Group Shipped No Warranty)

2008+ Mitsubishi Lancer Eibach Sportline Lowering Springs
1.7" Front Drop
1.2" Rear Drop

Local Distributor A$525.00 (Shipped) -
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 5 guests