***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Lancer sportsback roof spoiler

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

Post Reply
scubascuba
Lancer Learner
Lancer Learner
Posts: 5
Joined: Mon Aug 13, 2012 1:11 pm
Location: Melbourne, Australia

Lancer sportsback roof spoiler

Postby scubascuba » Tue May 06, 2014 9:24 am

Hi Club CJ members,
can anyone suggest where in Melbourne I can get a replacement roof spoiler for a 2012 Lancer ES Sportsback (new / used)?
Tried a couple of panel beaters and they don't reckon it can be fixed because of where it has broken off (at the mounting holes).
The cost of a new spoiler from Mitsubishi is ridiculous.


Image

Nick
nyhmix
Lancer Newbie
Lancer Newbie
Posts: 22
Joined: Sat May 03, 2014 2:57 pm
Location: mackay qld

Postby nyhmix » Tue May 06, 2014 9:47 am

when u figure this out if you get one new i would like to know to i wish to buy one for my ES sportback.
Lancer09
Lancer VR/GT
Lancer VR/GT
Posts: 229
Joined: Fri Nov 01, 2013 7:27 am
Location: Sydney

Postby Lancer09 » Tue May 06, 2014 12:02 pm

http://www.ebay.com.au/itm/Genuine-Mits ... c9d&_uhb=1
Lancer09
Lancer VR/GT
Lancer VR/GT
Posts: 229
Joined: Fri Nov 01, 2013 7:27 am
Location: Sydney

Postby Lancer09 » Tue May 06, 2014 12:02 pm

http://www.ebay.com.au/itm/MITSUBISHI-C ... c88&_uhb=1
nyhmix
Lancer Newbie
Lancer Newbie
Posts: 22
Joined: Sat May 03, 2014 2:57 pm
Location: mackay qld

Postby nyhmix » Tue May 06, 2014 12:13 pm

kevin your the best mate
User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Tue May 06, 2014 8:18 pm

Note the VRX and ralliart sportbacks have a different roof spoiler than the lower models.

If you want to 'upgrade' now is the time. :)
Lancer09
Lancer VR/GT
Lancer VR/GT
Posts: 229
Joined: Fri Nov 01, 2013 7:27 am
Location: Sydney

Postby Lancer09 » Wed May 07, 2014 1:04 pm

you're welcome! i was going to purchase from the first link i think but they didn't have my colour type (lightning blue, they only had deep blue) but they said they could order one in for about 150 but the installation was expensive.

I talked to someone on ebay who said installation was only $80 for a 30 minute job whereas the guys who were going to order it in were going to charge like about 150-200 for a 2 hour installation.
scubascuba
Lancer Learner
Lancer Learner
Posts: 5
Joined: Mon Aug 13, 2012 1:11 pm
Location: Melbourne, Australia

Postby scubascuba » Wed May 07, 2014 2:38 pm

Kevin, you're the man.

Isn't it a straightforward DIY installation - just bolting it to the tailgate through the existing mounting holes?
Lancer09
Lancer VR/GT
Lancer VR/GT
Posts: 229
Joined: Fri Nov 01, 2013 7:27 am
Location: Sydney

Postby Lancer09 » Wed May 07, 2014 3:22 pm

It would be but i have an ES so i'd have to get a template and measure everything out to drill the holes in and theres the after job for making sure it doesn't rust etc
User avatar
lantourismo
Lancer Legend
Lancer Legend
Posts: 1248
Joined: Sat Apr 13, 2013 8:32 pm
Location: Perth, Australia

Postby lantourismo » Wed May 07, 2014 4:44 pm

Silicon the holes up
Lancer09
Lancer VR/GT
Lancer VR/GT
Posts: 229
Joined: Fri Nov 01, 2013 7:27 am
Location: Sydney

Postby Lancer09 » Wed May 07, 2014 5:32 pm

even so, i;m not that confident to do it myself. I'd rather have a pro to do it, better safe then sorry
User avatar
lantourismo
Lancer Legend
Lancer Legend
Posts: 1248
Joined: Sat Apr 13, 2013 8:32 pm
Location: Perth, Australia

Postby lantourismo » Wed May 07, 2014 5:35 pm

Shop around panel beaters, and offer cash in hand. Often they are happy to make a deal then
User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Wed May 07, 2014 7:24 pm

I got mine fitted by the car audio guys doing the reversing sensors and sub installation - mine's a sedan and the holes are pre-marked from the factory - any markers on the inside of the hatch?
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."

Image
scubascuba
Lancer Learner
Lancer Learner
Posts: 5
Joined: Mon Aug 13, 2012 1:11 pm
Location: Melbourne, Australia

Postby scubascuba » Tue May 13, 2014 1:25 pm

Can anyone recommend a good paintshop in SE Melbourne that can repaint a spoiler for a reasonable price (~$200)?
User avatar
4B11LA
Lancer Newbie
Lancer Newbie
Posts: 24
Joined: Wed Mar 06, 2013 8:42 pm
Location: sydney, Australia

hatch spoiler

Postby 4B11LA » Mon May 26, 2014 9:32 pm

if you are still looking for one i can help but it is white and would require some paint
located in sydney
Post Reply

Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 81 guests